SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch Instruction Manual

1. Introduktion og overview

The SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch is a compact, two-way smart switch designed to integrate seamlessly into your smart home ecosystem. It operates on the Zigbee 3.0 protocol, offering reliable control of your lighting without requiring a neutral wire. This manual provides comprehensive instructions for installation, operation, and maintenance, ensuring you can maximize the convenience and efficiency of your smart lighting.

The SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch, shown with its product packaging.

2. Produktfunktioner

• Kompakt design: Easily fits into the smallest 120-type wall switch boxes, compatible with external rocker switches and self-reset switches. No neutral wire is required for installation.


The compact design of the ZBMINIL2 allows it to fit into standard wall switch boxes without requiring a neutral wire.

• Zigbee 3.0-protokol: Connects with Zigbee hubs to form a local home area network (LAN). Smart scenes continue to function even if internet connectivity is lost. (Note: ZBMINIL2 acts as a Zigbee end device and does not extend signal range.)

The ZBMINIL2 is compatible with a wide range of Zigbee hubs, including Amazon Echo devices with built-in Zigbee.
• Fjernbetjening: Control your appliances remotely via the eWeLink App after pairing with a Zigbee hub.
• Stemmestyring: Compatible with popular voice assistants including Amazon Alexa, Google Home, Alice, and SmartThings for convenient hands-free operation.


Control your lights effortlessly using voice commands through compatible smart assistants.

• Timers & Scenes: Utilize the eWeLink app to set countdowns, single timers, and loop timers. Create customized smart scenes to automate connected devices based on your schedule and preferences.

Set precise schedules and timers for your lighting using the eWeLink app.

3. Opsætning og installation

Safety First: Before beginning any electrical installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Failure to do so can result in electric shock or damage to the device.

Ledningsinstruktioner

The ZBMINIL2 supports both single-pole and 2-way switch configurations. Refer to the diagrams below for correct wiring.

This diagram illustrates the wiring for a single external switch control. Connect the Live In (L In) and Live Out (L Out) wires as shown. The external switch connects to S1 and S2 terminals.

This diagram illustrates the wiring for a 2-way switch control. Ensure Live In (L In) and Live Out (L Out) are connected correctly. The two external switches connect to S1 and S2 terminals.

Installationstrin

1. Power off the circuit at the main breaker.
2. Remove the existing switch panel and external switch.
3. Connect the ZBMINIL2 according to the appropriate wiring diagram (single-pole or 2-way).
4. Carefully place the ZBMINIL2 module into the mounting box.
5. Reinstall the switch panel.
6. Gendan strømmen til kredsløbet.

Pairing with eWeLink App

1. After powering on, the device will automatically enter pairing mode (green LED indicator flashes slowly).
2. Open the eWeLink App on your smartphone.
3. Add the device to your Zigbee gateway/hub within the app.
4. Følg anvisningerne på skærmen for at fuldføre parringsprocessen.

4. Betjeningsvejledning

• Manuel kontrol: The ZBMINIL2 can be controlled directly by pressing the connected physical wall switch. The switch type (rocker or push-button) can be configured by pressing the button on the ZBMINIL2 module 3 times quickly until the green LED flashes 3 times.
• App kontrol: Once paired, open the eWeLink App. You can toggle the switch on/off, set timers (countdown, loop), and create smart scenes to automate lighting based on schedules or other device triggers.
• Stemmestyring: Integrate the ZBMINIL2 with Amazon Alexa, Google Home, or SmartThings. Use voice commands such as "Alexa, turn on the living room light" or "Hey Google, turn off the bedroom light" to control your connected devices.

5. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Tilslutningskontrol: Kontroller jævnligt ledningsforbindelserne for at sikre, at de er sikre.
• Firmwareopdateringer: Ensure your eWeLink App and ZBMINIL2 firmware are up to date for optimal performance and security. Updates are typically managed through the eWeLink App.

6. Fejlfinding

Enheden parrer ikke

• Ensure the device is powered on and the green LED is flashing slowly (pairing mode). If not, power cycle the device.
• Verify your Zigbee hub is powered on and within range.
• Check your Wi-Fi network (2.4GHz is required for the hub, though ZBMINIL2 uses Zigbee). Ensure strong signal.
• Try resetting the device to factory settings (refer to the eWeLink app or product support for specific reset instructions).

Enheden reagerer ikke

• Check power supply to the ZBMINIL2.
• Verify Zigbee network connectivity. If the hub is offline, the switch may not respond to app commands but should still respond to the physical switch.
• Ensure the physical switch type is correctly configured (rocker/push-button).

LED-indikatoradfærd

• Green LED flashing slowly: Parringstilstand.
• Grøn LED fast: Connected and operating normally.
• Ingen LED: No power or device malfunction.

7. Specifikationer

Physical dimensions and key electrical specifications of the ZBMINIL2.

8. Garanti og support

Garantioplysninger: For detaljerede garantioplysninger henvises til garantikortet, der følger med dit produkt, eller besøg den officielle SONOFF-side. webwebsted.

Kundesupport: Hvis du støder på problemer eller har spørgsmål, der ikke er dækket i denne manual, bedes du kontakte SONOFFs kundesupport via deres officielle website or the eWeLink App.