Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetisk SMA Antenne Brugsanvisning

1. Introduktion

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna. This antenna is designed to enhance Wi-Fi connectivity for compatible Teltonika routers, specifically the RUTX10, RUTX11, RUTX12, RUTX14, and RUTXR1 models.

The PR1KRD30 antenna features dual-band support, a magnetic mounting base for flexible placement, and an RP-SMA male connector for secure attachment.

2. Pakkens indhold

• 1x Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna

3. Opsætning og installation

Follow these steps to properly set up your Teltonika PR1KRD30 antenna:

1. Identificér forbindelsesporte: Locate the Wi-Fi antenna ports on your compatible Teltonika router (RUTX10, RUTX11, RUTX12, RUTX14, or RUTXR1). These ports are typically labeled for Wi-Fi antennas.
2. Tilslut antennen: Carefully align the RP-SMA male connector of the PR1KRD30 antenna with the corresponding Wi-Fi antenna port on your router. Gently screw the connector clockwise until it is finger-tight. Avoid over-tightening to prevent damage.
3. Placer antennen: The PR1KRD30 features a magnetic base. Place the antenna on a flat, metallic surface for optimal stability and signal reception. Consider placing it in an elevated position or near a window for improved signal strength. The antenna cable length is 1.5 meters, allowing for flexible placement.
4. Bekræft forbindelsen: Ensure the antenna is securely attached and positioned. Once connected, power on your router and verify Wi-Fi functionality.

Image: The Teltonika PR1KRD30 antenna, showing its magnetic base and the RP-SMA male connector at the end of its 1.5-meter cable. This antenna is designed for enhancing Wi-Fi signals for compatible Teltonika routers.

4. Betjeningsvejledning

The Teltonika PR1KRD30 antenna operates passively to enhance the Wi-Fi signal of your connected router. No specific user configuration is required for the antenna itself once it is physically connected.

• Dual-band betjening: The antenna supports both 2.4 GHz (2400-2483.5 MHz) and 5 GHz (5150-5905 MHz) Wi-Fi frequency bands, providing flexibility for various network environments.
• Signaloptimering: For optimal performance, ensure the antenna is positioned away from large metal objects or other sources of electromagnetic interference. Experiment with different placements to find the best signal strength.
• Routerindstillinger: Any Wi-Fi network configuration, such as SSID, password, or channel selection, is managed through your connected Teltonika router's interface. Refer to your router's manual for these settings.

5. Vedligeholdelse

The Teltonika PR1KRD30 antenna requires minimal maintenance to ensure long-term performance.

• Rensning: Periodically wipe the antenna's exterior with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• Miljøforhold: The antenna is designed to operate within a temperature range of -40 °C to +75 °C. Avoid exposing it to extreme temperatures outside this range or to excessive moisture.
• Fysisk inspektion: Regularly check the cable and connector for any signs of damage. Ensure the magnetic base remains securely attached to its mounting surface.

6. Fejlfinding

Hvis du oplever problemer med din antenne, kan du overveje følgende fejlfindingstrin:

• Dårligt Wi-Fi-signal:
  • Ensure the antenna is securely connected to the router's Wi-Fi port.
  • Relocate the antenna to a different position, preferably higher or closer to the area requiring better coverage, and away from obstructions.
  • Verify that your router's Wi-Fi settings are correctly configured (e.g., correct frequency band selected if applicable).
• Ingen Wi-Fi-forbindelse:
  • Confirm the antenna connector is fully tightened.
  • Test with another compatible antenna if available, to rule out an antenna fault.
  • Check your router's status indicators and settings to ensure its Wi-Fi module is active.
• Fysisk skade: If the antenna or cable appears damaged, discontinue use and contact your reseller or Teltonika support for assistance.

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Teltonika reseller. General product support and technical assistance can be obtained through the official Teltonika Networks webwebstedet eller ved at kontakte deres kundesupportkanaler.