Herdio Marine Radio and Speakers Set

1. Produktet er slutview

The Herdio Marine Radio and Speakers Set (Model 230B-6005B-47B) is designed for marine and outdoor environments, offering audio entertainment with robust construction. This set includes a marine gauge head unit, two 6.5-inch marine speakers, and a flexible mast FM/AM antenna.

Nøglefunktioner:

• Bluetooth-forbindelse: Built-in Bluetooth for wireless audio streaming with a range of up to 10 feet.
• IP66 vandtæt rating: Marine-grade waterproof construction ensures durability in harsh marine conditions.
• Powerful Speakers: Two 6.5-inch marine speakers with a peak power handling of up to 120W each (240W total for the pair), resistant to salt water and sea air.
• Fleksibel antenne: 16.9-inch flexible mast antenna with a 55-inch cable and 180-degree swivel base for optimal signal reception.
• Kompakt design: The head unit features a universal compact round design that fits into standard size tachometer gauge openings.

Pakkeindhold:

• Herdio Marine Digital AM/FM Radio Receiver (Head Unit) x 1
• Herdio 6.5 Inch Marine Boat Speakers x 2
• Herdio Flexible Waterproof Marine Antenna x 1
• Mounting Hardware and Wiring

Image 1.1: All components included in the Herdio Marine Radio and Speakers Set package.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing and operating this product. Failure to follow these instructions may result in injury or damage to the product.

Generel sikkerhed:

• Sørg for, at strømkilden er afbrudt før installation for at forhindre elektrisk stød.
• Verify all wiring connections are secure and properly insulated to prevent short circuits.
• Udsæt ikke produktet for ekstreme temperaturer eller direkte sollys i længere perioder.
• This product is designed for 12V DC negative ground systems only.

Vandtæt vurdering:

The head unit and speakers are rated IP66 waterproof, meaning they are protected against powerful water jets. While designed for marine environments, avoid submerging the unit or speakers for extended periods. Ensure all connections are properly sealed to maintain waterproof integrity.

Image 2.1: The head unit is designed to withstand water splashes and jets, suitable for marine use.

3. Installation

Proper installation is crucial for optimal performance and longevity of your Herdio Marine Radio and Speakers Set. It is recommended to have installation performed by a qualified technician.

3.1. Pre-Installation Considerations:

• Choose a mounting location that is easily accessible, provides adequate ventilation for the head unit, and is away from direct heat sources.
• Ensure sufficient space behind the mounting surface for the head unit's depth and wiring.
• For speakers, select locations that allow for clear sound projection and proper mounting depth.

3.2. Dimensioner:

Image 3.1: Head unit and speaker dimensions for accurate mounting.

• Head Unit Dimensions: 2.48 x 7.09 x 2.48 tommer (6.3 x 18 x 6.3 cm)
• Speaker Cut-Out Diameter: 5.31 tommer (135 mm)
• Speaker Mounting Depth: 2.48 tommer (63 mm)
• Antennelængde: 16.9 inches (43cm) mast, 55 inches (138.5cm) cable.

Image 3.2: Flexible antenna dimensions and features.

3.3. Head Unit Installation:

1. Cut a circular hole in the desired mounting surface according to the head unit's dimensions.
2. Insert the head unit into the opening.
3. Secure the head unit using the provided mounting bracket and screws.

3.4. Højttalerinstallation:

1. Using the provided template (if applicable) or the specified cut-out diameter, cut holes for the speakers.
2. Connect the speaker wires to the terminals on the back of each speaker. Ensure correct polarity (+ to + and - to -).
3. Mount the speakers into the cut-out holes and secure them with the provided screws.

Billede 3.3: Bagside view of the 6.5-inch marine speaker showing wiring terminals.

3.5. Antenneinstallation:

1. Choose a mounting location for the antenna that provides clear line of sight and is away from obstructions.
2. Mount the flexible mast antenna using its 180-degree swivel base.
3. Route the antenna cable to the head unit and connect it to the designated antenna input.

3.6. Ledningsforbindelser:

Connect the power, ground, and speaker wires to the head unit according to the wiring diagram provided in the quick start guide. The head unit supports four channels with a maximum output power of 40W per channel. RCA outputs are available for connecting an external ampefter ønske.

4. Betjeningsvejledning

4.1. Tænd/sluk:

• Tryk på Magt button (usually marked with a power symbol) to turn the unit on or off.

4.2. Kildevalg:

• Tryk på SRC (Source) button to cycle through available audio sources: FM radio, AM radio, Bluetooth, and USB.

4.3. Lydstyrkekontrol:

• Brug VOL+ og VOL - knapper til at justere lydstyrken.

4.4. Bluetooth-parring:

1. Select Bluetooth as the audio source. The unit will enter pairing mode, indicated by a flashing Bluetooth icon on the display.
2. Aktiver Bluetooth på din mobilenhed, og søg efter tilgængelige enheder.
3. Select "Herdio" (or similar name) from the list to pair. Once paired, the Bluetooth icon will stop flashing.
4. Du kan nu streame lyd trådløst fra din enhed.

4.5. Radio Operation (FM/AM):

1. Select FM or AM as the audio source.
2. Brug Tune Up og Indstil knapperne til manuelt at stille ind på en station.
3. Tryk og hold på Tune Up or Indstil buttons for automatic station seeking.
4. To save a station, tune to the desired frequency, then press and hold a preset button (if available) until the display confirms the save.

4.6. USB-afspilning:

• Insert a USB drive into the USB port. The unit will automatically switch to USB source and begin playback of compatible audio files (FLAC/MP3/WMA).
• Brug Forrige/Næste nummer buttons to navigate through songs.
• Brug Afspil/pause knap til at styre afspilningen.

5. Vedligeholdelse

Regular maintenance helps ensure the longevity and optimal performance of your marine audio system.

• Rensning: Brug en blød, damp cloth to clean the exterior of the head unit and speakers. Avoid abrasive cleaners or solvents that could damage the finish or waterproof seals.
• Inspektion: Periodically check all wiring connections for corrosion or damage. Ensure mounting screws are tight.
• Vandeksponering: After exposure to saltwater, rinse the unit and speakers with fresh water to prevent salt buildup and corrosion.

6. Fejlfinding

If you encounter issues with your Herdio Marine Radio and Speakers Set, refer to the following common problems and solutions:

7. Specifikationer

8. Garanti og support

Herdio products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Herdio webwebsted.

Du kan også besøge Herdio-butik på Amazon for yderligere produktinformation og supportressourcer.