4lite High Performance LED Under Cabinet Light 310mm 3K Instruction Manual

1. Produktet er slutview

The 4lite High Performance LED Under Cabinet Light is designed to provide efficient and bright illumination for both domestic and commercial applications. This LED light features a linkable design, allowing for continuous lighting installations. It operates on a 220-240V input and comes supplied with a mains power cable for direct connection.

Nøglefunktioner omfatter:

• High performance LED illumination.
• Suitable for both home and commercial environments.
• Linkable for continuous lighting setups.
• Supplied with a mains power cable.

Figure 1: A white 4lite LED under cabinet light, showcasing its sleek, linear design.

2. Sikkerhedsoplysninger

Læs alle sikkerhedsinstruktioner omhyggeligt inden installation og brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.

• Elektrisk sikkerhed: Ensure the main power supply is switched off at the consumer unit/fuse box before commencing any installation or maintenance.
• Uddannet elektriker: Installation should only be carried out by a qualified electrician or competent person in accordance with national wiring regulations.
• Voltage: This product is designed for 220-240V AC supply. Do not connect to any other voltage.
• Beliggenhed: Do not install in areas where it may be exposed to direct water spray or extreme humidity unless specifically rated for such environments.
• Varme: Do not cover the light fixture with any material that may impede heat dissipation.
• Skade: Do not operate the light if the cable or housing is damaged. Contact a qualified professional for repair or replacement.
• Bortskaffelse: Dispose of this product responsibly at the end of its life cycle, following local regulations for electronic waste.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter med installationen.

• 1 x 4lite High Performance LED Under Cabinet Light (Model: 4L1/1000/3)
• 1 x strømkabel
• Mounting accessories (screws, clips - typically included, assuming based on product type)

4. Opsætning og installation

Before beginning installation, ensure the power supply is disconnected at the main circuit breaker.

1. Planplacering: Determine the desired location for the under cabinet light. Consider the area to be illuminated and the proximity to a power outlet. If linking multiple units, plan the layout accordingly.
2. Marker monteringspunkter: Hold the light fixture in place and mark the positions for the mounting clips/screws on the underside of the cabinet. Refer to the dimensions diagram for precise measurements.
3. Installer monteringshardware: Drill pilot holes if necessary and securely attach the mounting clips or brackets to the cabinet using the provided screws.
4. Fastgør lysarmatur: Carefully snap or slide the LED under cabinet light into the installed mounting clips/brackets until it is securely held in place.
5. Tilslut strøm: Connect the supplied mains power cable to the light fixture. Ensure the connection is firm.
6. Kabelrute: Route the power cable safely to a suitable 220-240V AC power outlet, ensuring it is not pinched or exposed to damage.
7. Link Multiple Units (Optional): If installing multiple linkable units, connect them using appropriate linking cables (sold separately or included, depending on package). Ensure the total wattage overstiger ikke kredsløbets kapacitet.
8. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved hovedafbryderen.
9. Test drift: Switch on the light to confirm proper functionality.

Figure 2: A technical diagram illustrating the dimensions of the 4lite LED under cabinet light, showing a length of 310mm, a width of 35mm, and a height of 24mm.

Figur 3: Et example of the 4lite LED under cabinet light installed in a modern kitchen, illuminating the countertop and backsplash.

Figur 4: En anden view of a contemporary kitchen featuring the 4lite LED under cabinet light providing ambient and task lighting under wall cabinets.

5. Betjeningsvejledning

The 4lite LED Under Cabinet Light operates simply:

• Once installed and connected to a power source, the light can be switched on and off using the wall switch or power outlet switch it is connected to.
• There are no additional controls on the fixture itself.

6. Vedligeholdelse

The 4lite LED Under Cabinet Light requires minimal maintenance.

• Rensning: Sørg for, at strømmen er slukket, inden rengøring. Tør armaturet af med en blød, tør eller let fugtet klud.amp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen eller de elektriske komponenter.
• lysdioder: The integrated LED light source is designed for long life and is not user-replaceable. Do not attempt to open the fixture or replace the LEDs.
• Inspektion: Periodically check the power cable and connections for any signs of wear or damage. If damage is found, disconnect power immediately and consult a qualified electrician.

7. Fejlfinding

If you encounter issues with your 4lite LED Under Cabinet Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact 4lite customer support or a qualified electrician.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the documentation provided at the point of purchase or contact your retailer. Warranty terms and conditions may vary by region and retailer.

For technical support or further assistance, please visit the official 4lite webwebstedet eller kontakt deres kundeserviceafdeling. Kontaktoplysninger findes typisk på produktemballagen eller producentens webwebsted.