Westgate LED Wall Pack Instruction Manual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Westgate LED Rotatable Wall Pack, Model LW360-60W-50K-G2. This fixture is designed for general site lighting in outdoor environments such as alleys, loading docks, doorways, pathways, and parking areas. Please read these instructions thoroughly before installation and retain them for future reference.

2. Sikkerhedsoplysninger

WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
• Sørg for, at forsyningen voltage is correct for the fixture (120 Volts AC).
• Do not handle live wires. Always ensure power is off before working on the fixture.
• Brug passende personlige værnemidler (PPE) under installationen, herunder sikkerhedsbriller og handsker.
• Sørg for, at armaturet er sikkert monteret for at forhindre det i at falde ned.
• Undlad at ændre armaturet på nogen måde. Uautoriserede ændringer kan ugyldiggøre garantien og skabe sikkerhedsrisici.
• This product is rated IP65, suitable for wet locations. Ensure all connections are properly sealed to maintain this rating.

3. Produktfunktioner

• Rotatable Heads (with Set Screw) for adjustable light direction.
• Three 1/2" Threaded Knockouts: One on the bottom, and one on each side for versatile wiring options.
• TIR Optic Lens - TYPE II for efficient light distribution.
• Die-cast aluminum housing with powder coat finish (Dark Bronze) for durability and weather resistance.
• 7-Year Warranty for long-term reliability.
• IP65 rated, suitable for wet outdoor locations.

Billede 3.1: Vinklet view of the Westgate LED Wall Pack, showcasing its robust dark bronze housing and dual LED light panels.

4. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter med installationen.

• 1 x Westgate LED Wall Pack (Model LW360-60W-50K-G2)
• Mounting Hardware (screws, anchors, gaskets as applicable)
• Instruktionsmanual (dette dokument)

5. Opsætning og installation

Vigtig: Sørg for, at strømmen er afbrudt ved afbryderen, før installationen påbegyndes.

5.1 Montering af armaturet

1. Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight (approximately 6 pounds).
2. Mark the desired mounting points using the fixture's mounting plate as a template.
3. Drill pilot holes if necessary, and insert appropriate wall anchors for your mounting surface.
4. Secure the mounting plate to the wall using the provided mounting hardware. Ensure it is level and firmly attached.
5. Carefully attach the fixture body to the mounting plate, ensuring all gaskets are properly seated to maintain the IP65 rating.

Billede 5.1: Forside view of the Westgate LED Wall Pack, showing the two LED panels and the mounting screw locations at the base.

5.2 Elektriske ledninger

Al ledningsføring skal overholde lokale og nationale elektriske forskrifter.

1. Route the electrical supply wires through one of the 1/2" threaded knockouts on the fixture.
2. Connect the supply wires to the fixture's wires:
   • Black wire (Live) to Black wire (Live)
   • White wire (Neutral) to White wire (Neutral)
   • Green/Bare Copper wire (Ground) to Green/Bare Copper wire (Ground)
3. Fastgør alle ledningsforbindelser med passende ledningsmøtrikker eller -stik.
4. Sørg for, at alle forbindelser er tætte og korrekt isolerede.
5. Carefully tuck all wires into the junction box or fixture housing, ensuring no wires are pinched.
6. Close and secure the fixture cover, ensuring a watertight seal.

Billede 5.2: Side view of the Westgate LED Wall Pack, illustrating the profile and potential access points for wiring.

6. Betjeningsvejledning

1. Once installation and wiring are complete, restore power at the circuit breaker.
2. The LED Wall Pack will illuminate.
3. To adjust the light direction, carefully loosen the set screws on the rotatable heads, adjust to the desired angle, and then securely tighten the set screws. Do not overtighten.

7. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your LED Wall Pack.

• Rensning: Rengør armaturets yderside regelmæssigt med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or optical components. Ensure power is off before cleaning.
• Inspektion: Annually inspect the fixture for any signs of damage, loose connections, or wear. Check for any water ingress or corrosion. Address any issues promptly.
• lysdioder: The LED light source is designed for long life and is not user-serviceable. Do not attempt to replace individual LEDs.

8. Fejlfinding

If you experience issues with your LED Wall Pack, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, contact Westgate customer support or a qualified electrician.

9. Specifikationer

Image 9.1: Dimensional drawing of the Westgate LED Wall Pack, showing approximate measurements of 9.1 inches width, 8.8 inches height, and 5.2 inches depth.

10. Garantioplysninger

This Westgate LED Wall Pack (Model LW360-60W-50K-G2) is covered by a 7-års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or further details, please contact Westgate customer support.

11. Support og kontakt

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Westgate customer support.

You can find more information and contact details on the official Westgate webhjemmeside eller via deres Amazon-butiksside:

Visit the Westgate Store on Amazon