Produkt overview
The MOUNTUP Single Monitor Wall Mount (Model MU2003-AU) is designed to securely hold a single computer screen on a wall, freeing up desk space and allowing for flexible viewing angles. This gas spring monitor arm supports most flat or curved monitors up to 32 inches, with a weight capacity ranging from 4.4 to 19.8 pounds. It is compatible with VESA patterns 75x75mm and 100x100mm. The mount is suitable for installation on wood studs, brick, and concrete walls, but it is not intended for drywall-only applications.
Image: The MOUNTUP Single Monitor Wall Mount, showcasing its sleek black design and articulated arm. This mount provides a space-saving solution by elevating your monitor off the desk.
Skærmkompatibilitet
Before installation, ensure your monitor meets the following compatibility requirements:
- Skærmstørrelse: Fits most flat or curved computer screens up to 32 inches.
- Belastningskapacitet: Supports displays weighing between 4.4 pounds (2 kg) and 19.8 pounds (9 kg).
- VESA mønster: Compatible with VESA mounting patterns of 75x75mm and 100x100mm. Verify the four screw holes on the back of your monitor. If your monitor has a different VESA pattern, an adapter may be required (not included).
Image: Visual representation of the monitor mount's compatibility, highlighting the maximum load capacity (4.4-19.8 lbs), VESA compatibility (75x75mm, 100x100mm), and maximum screen size (32 inches).
Opsætning og installation
Carefully follow these steps to install your MOUNTUP Single Monitor Wall Mount. It is recommended to have a second person assist during certain stages af installationen.
1. Wall Compatibility
This monitor mount is designed for installation on solid wood studs, concrete walls, or brick walls. MÅ IKKE monteres alene på gipsvæg.
Image: Illustrates the types of walls suitable for installation: wood stud, concrete wall, and brick wall. It explicitly warns against mounting on drywall without a stud.
2. Attaching Arm Assembly to Wall
Locate a suitable mounting position on your chosen wall type. Use a stud finder to accurately locate the center of a wood stud if applicable. Mark the pilot holes for drilling.
Drill pilot holes according to the manual's specifications for your wall type. Secure the arm assembly to the wall using the provided lag bolts and washers. Ensure the assembly is level before fully tightening.
Video: MOUNTUP Single Monitor Wall Mount MU2003 Installation Guide. This video provides a comprehensive step-by-step guide for installing the monitor arm assembly to the wall, including locating studs, drilling pilot holes, and securing the mount.
Image: Shows the built-in gas spring mechanism and the quick-release VESA plate, which simplifies the process of attaching and detaching the monitor.
3. Attaching Monitor to VESA Plate
Attach the VESA plate to the back of your monitor using the appropriate screws and washers provided. Ensure the plate is securely fastened to the monitor's VESA mounting holes.
4. Mounting Monitor onto Arm
Carefully slide the monitor (with the attached VESA plate) onto the head of the swivel arm. Ensure it clicks securely into place. Install the security bolt to prevent accidental dislodgement.
Betjening og justeringer
MOUNTUP monitorarmen tilbyder fuld bevægelseskapacitet for optimal viewing comfort and ergonomic positioning.
1. Justering af gasfjederspænding
The gas spring tension needs to be adjusted to match your monitor's weight. This ensures the arm can hold the monitor at any desired height without drifting up or down.
- Hvis skærmen falls down: Turn the screw counter-clockwise ("+") direction to increase gas spring tension for a heavier monitor.
- Hvis skærmen rises up: Turn the screw clockwise ("-") direction to reduce gas spring tension for a lighter monitor.
Hold the arm in a horizontal position while making adjustments. Refer to the table in the image for approximate turns based on monitor weight.
Video: MOUNTUP Gas Spring Tension & Tilting Adjustment Guide MU2003. This video demonstrates how to adjust the gas spring tension to ensure the monitor arm holds your display securely at any height.
Billede: Detaljeret view of the gas spring adjustment screw and the tilt angle adjustment bolt, with instructions on how to modify tension and angle.
2. Justering af hældningsvinkel
To adjust the monitor's tilt angle (up 90° / down 45°):
- Løsn vippebolten.
- Juster skærmen til den ønskede vinkel.
- Retighten the tilting bolt to secure the position.
3. Drejning og rotation
The monitor arm allows for extensive movement:
- Drejelig: The arm can swivel up to 270° at the wall plate and 180° at the monitor connection point, allowing you to easily share your screen or adjust your viewvinkel fra forskellige positioner i rummet.
- Rotation: The monitor can rotate 360° (from landscape to portrait orientation) without removing it from the mount.
- Højdejustering: The gas spring arm provides up to 12.2 inches of vertical height adjustment, allowing you to position your monitor at an ergonomic eye level.
Image: Demonstrates the full range of motion, including height adjustment (12.2 inches), 360° rotation, 180° swivel at two points, and tilt angles (+90°/-90°).
Video: MOUNTUP Single Monitor Wall Mount MU2003 Function Display. This video showcases the various movements and adjustments possible with the monitor arm, including extension, swivel, tilt, and rotation.
4. Kabelforvaltning
Integrated cable management clips help keep your workspace tidy by routing cables along the arm. Open the clips, insert your cables, and close them to secure.
Image: Before and after comparison showing how the monitor arm helps create a clutter-free and ergonomically optimized workspace.
Opretholdelse
To ensure the longevity and optimal performance of your MOUNTUP monitor arm, regular maintenance is recommended:
- Rensning: Tør holderen af med en blød kludamp klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Inspektion: Periodically check all bolts and connections to ensure they are secure. Retighten if necessary.
- Gasfjeder: If the monitor arm's movement becomes stiff or too loose over time, re-adjust the gas spring tension as described in the "Operating and Adjustments" section.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Monitor arm does not hold position (drifts up or down). | Incorrect gas spring tension for monitor weight. | Adjust the gas spring tension using the included hex key. Turn counter-clockwise to increase tension for heavier monitors, or clockwise to decrease tension for lighter monitors. Refer to the "Gas Spring Tension Adjustment" section. |
| Monitor tilts forward or backward excessively. | Tilting bolt is too loose. | Retighten the tilting bolt on the VESA plate connection point. Refer to the "Tilt Angle Adjustment" section. |
| Arm feels stiff or difficult to move. | Gas spring tension is too high or joints are tight. | Reduce gas spring tension slightly. Apply a small amount of silicone lubricant to the arm's pivot points if necessary. |
| Monitor is not level after installation. | Arm assembly not perfectly level during wall mounting. | Slightly loosen the wall mounting bolts, adjust the arm assembly to be level, and then retighten the bolts securely. |
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 2.76 x 8.66 x 14.57 tommer |
| Varens vægt | 4.18 pund |
| Varemodelnummer | MU2003-AU |
| Monteringstype | Vægmontering |
| Bevægelsestype | Vip, roter, drej, højdejustering, fuld bevægelse |
| Mærke | MONTERING |
| Materiale | Aluminium |
| Maksimal kompatibel størrelse | 32 tommer |
| Minimum kompatibel størrelse | 17 tommer |
| VESA-kompatibilitet | 75x75mm, 100x100mm |
| Vægt kapacitet | 4.4-19.8 lbs |
| Maksimal hældningsvinkel | 90 Degrees (Up) / 45 Degrees (Down) |
| Farve | Sort |
| Fabrikant | MONTERING |
| Oprindelsesland | Kina |
| Dato først tilgængelig | 28. juni 2022 |
Garanti og support
MOUNTUP provides 3-year support for this monitor mount, reflecting confidence in its construction, strength, and durability. For any pre-purchase questions, installation assistance, or support needs, please do not hesitate to contact MOUNTUP customer service.
For yderligere ressourcer kan du henvise til den officielle Installationsmanual (PDF) og Brugervejledning (PDF) tilgængelig online.
