N1 Critical N1C.L1500 1500VA/1350W Lithium-ion rack/tower UPS brugermanual

1. Introduktion

The N1 Critical N1C.L1500 is a high-performance 1500VA/1350W Uninterruptible Power Supply (UPS) designed to provide reliable power protection for critical electronic equipment. Featuring advanced Lithium-Ion (LiFePO4) battery technology, this UPS offers extended battery life, higher power density, and improved thermal performance compared to traditional VRLA battery systems. It supports both rackmount and tower configurations, making it versatile for various IT environments.

2. Sikkerhedsinstruktioner

Please read and follow all safety instructions carefully before installing, operating, or servicing the UPS. Failure to comply with these instructions may result in electric shock, fire, or serious injury.

• Denne UPS indeholder farlige stoffertagForsøg ikke at skille enheden ad. Der er ingen dele indeni, som kan repareres af brugeren.
• Tilslut kun UPS'en til en jordet vekselstrømsstikkontakt.
• Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig luftgennemstrømning omkring UPS'en.
• Avoid installing the UPS in areas with excessive moisture, dust, or extreme temperatures.
• In case of emergency, press the Emergency Power Off (EPO) button (if connected) or disconnect the UPS from the AC power source.
• The Lithium-Ion battery is not user-replaceable. Contact qualified service personnel for battery replacement.

3. Pakkens indhold

Kontroller, at alle genstande er til stede ved udpakning:

• N1 Critical N1C.L1500 UPS Unit
• Rackmonterede ører (2)
• Tower Stands (2)
• USB kommunikationskabel
• Input Power Cord (5-15P)
• Brugervejledning (dette dokument)

4. Produktet er slutview

4.1 Frontpanel

The front panel features the LCD display and control buttons for monitoring and configuring the UPS.

Figur 4.1: Forside view of the N1 Critical N1C.L1500 UPS, showing the integrated LCD display and control buttons.

Figure 4.2: Close-up of the N1 Critical N1C.L1500 UPS LCD display, indicating input voltage, battery status, and operational modes.

4.2 Bagpanel

The rear panel provides all necessary connections for input power, protected equipment, and communication interfaces.

Figur 4.3: Bagside view of the N1 Critical N1C.L1500 UPS, showing six NEMA 5-15R outlets, AC input, circuit protector, USB port, EPO port, and an intelligent slot.

• NEMA Outlets (6) 5-15R: For connecting critical equipment requiring battery backup and surge protection.
• AC Input (5-15P): Tilslutter UPS'en til strømforsyningen.
• Kredsløbsbeskytter: Resettable overload protection for the UPS input.
• USB-port: For connecting to a computer for power management software and monitoring.
• EPO-port (nødafbrydelse): Muliggør fjernbetjent nødnedlukning af UPS'en.
• Intelligent slot: For optional communication cards (e.g., SNMP card) to enhance network management capabilities.

5. Opsætning

5.1 Placering

The N1C.L1500 UPS can be installed in either a rackmount or tower configuration.

• Rackmount: Attach the provided rackmount ears to the sides of the UPS and secure it into a standard 19-inch equipment rack.
• Tårn: Attach the provided tower stands to the bottom of the UPS for vertical placement.

Ensure the installation location is well-ventilated, free from excessive heat or moisture, and has stable ambient temperatures.

5.2 Tilslutning til strøm

1. Connect the supplied input power cord to the AC Input port on the rear panel of the UPS.
2. Plug the other end of the input power cord into a grounded 120V AC wall outlet.

5.3 Tilslutning af udstyr

1. Ensure all equipment to be connected to the UPS is turned off.
2. Plug your critical equipment (computers, servers, network devices) into the NEMA 5-15R outlets on the rear panel of the UPS.
3. Do not connect surge suppressors or power strips to the UPS outlets, as this may overload the UPS.

5.4 Første opstart

1. After connecting the UPS to utility power and your equipment, press and hold the power button on the front panel for a few seconds until the UPS powers on.
2. LCD-displayet lyser, og UPS'en udfører en selvtest.
3. Once the self-test is complete, the UPS will enter normal operating mode, providing conditioned power to your connected devices.

6. Betjeningsvejledning

6.1 Tænd/sluk

• For at tænde: Tryk på tænd/sluk-knappen, og hold den nede, indtil displayet lyser.
• For at slukke: Press and hold the power button until the display turns off and the UPS shuts down.

6.2 Forståelse af LCD-skærmen

The LCD display provides real-time information about the UPS status, including input/output voltage, batteriopladningsniveau, belastningsprocenttage, and various operational modes or warnings. Refer to Figure 4.2 for a visual reference.

• Input/Output Voltage: Shows the current AC voltage supplied to and from the UPS.
• Batteriniveau: Angiver den resterende batteriopladning.
• Belastningsprocenttage: Viser procententage of the UPS's capacity currently being used by connected equipment.
• Driftsformer: Icons may indicate Line Mode, Battery Mode, Bypass Mode, or ECO Mode.
• Advarsels-/fejlindikatorer: Alerts for conditions such as overload, battery fault, or other system errors.

6.3 Batteribackupdrift

Under en magt outage eller betydelig volumentage fluctuation, the UPS will automatically switch to battery power, providing continuous power to connected equipment. An audible alarm may sound, and the display will indicate battery mode. The duration of backup power depends on the connected load and battery charge level.

6.4 Kommunikationsfunktioner

• USB-port: Connect the UPS to a computer using the provided USB cable. Install compatible power management software (available from the manufacturer's website) to monitor UPS status, configure settings, and perform graceful shutdowns of connected systems during extended power outages.
• EPO Port: Connect an external switch to the EPO port for immediate emergency shutdown of the UPS and connected equipment. This is typically used in critical safety scenarios.
• Intelligent slot: For advanced network monitoring and management, an optional SNMP card can be installed in this slot.

7. Vedligeholdelse

7.1 Pleje af batterier

The N1C.L1500 utilizes Lithium-Ion (LiFePO4) batteries, which offer a significantly longer lifespan (10-15 years) and better thermal tolerance compared to traditional lead-acid batteries. These batteries are not user-replaceable. For battery service or replacement, contact qualified service personnel.

7.2 Rengøring

Periodically clean the exterior of the UPS with a soft, dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow. Do not use liquid or aerosol cleaners.

7.3 Opbevaring

If storing the UPS for an extended period, ensure it is fully charged before storage. Store in a cool, dry environment. Recharge the UPS every 3-6 months to maintain battery health.

8. Fejlfinding

This section provides solutions to common issues you may encounter with the UPS.

9. Specifikationer

Technical specifications for the N1 Critical N1C.L1500 UPS:

• Kapacitet (VA/W): 1500VA / 1350W
• Input bindtage (Vac): 110/120V ±2%
• Indgangsfrekvens (Hz): 50/60Hz ±5 %
• Effektfaktor: 0.9
• Indgangsforbindelse: 5-15P
• NEMA Outlets: (6) 5-15R
• Batteritype: Lithium Ion (LiFePO4)
• Batteri Voltage (Vdc): 48V
• Køretid ved 100% belastning: 18 minutter
• Køretid ved 50% belastning: 36 minutter
• Dimensioner (HxBxD): 3.4″ (2U) x 17.2″ x 22.6″
• Nettovægt: 44 lb (20 kg)
• Driftstemperatur: Op til 140°F (60°C)

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official N1 Critical webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering for at validere garantien.