Toro Genuine OEM RWD Rear Drive Wheels Instruction Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Toro Genuine OEM RWD Rear Drive Wheels. These wheels are designed to ensure optimal performance and traction for compatible Toro 22-inch Recycler Lawn Mowers.

It is crucial to read and understand all instructions before attempting any installation or maintenance procedures. Retain this manual for future reference.

Image 1.1: Two Toro Genuine OEM RWD Rear Drive Wheels. These wheels feature a skid-resistant tread pattern and are designed for rear-wheel drive lawn mowers.

2. Sikkerhedsoplysninger

Always prioritize safety when working with machinery and replacement parts. Failure to follow safety guidelines can result in injury or damage to equipment.

• Read the Mower Manual: Before installing these wheels, consult your specific Toro lawn mower's owner's manual for detailed safety instructions and wheel replacement procedures.
• Afbryd strømmen: Always ensure the lawn mower's engine is off and the spark plug wire is disconnected before performing any maintenance or installation.
• Brug beskyttelsesudstyr: Brug passende personlige værnemidler (PPE), såsom handsker og øjenbeskyttelse, under installationen.
• Fastgør plæneklipperen: When lifting or tilting the mower, ensure it is stable and securely supported to prevent it from falling.
• Brug de rigtige værktøjer: Utilize the proper tools for the job to avoid damaging parts or causing injury.
• Hold børn og kæledyr væk: Ensure no one is in the immediate work area during installation or maintenance.

Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, der af staten Californien er kendt for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, besøg www.P65Warnings.ca.gov.

3. Produktfunktioner og kompatibilitet

3.1 Nøglefunktioner

• Genuine Toro OEM Part Number 138-3216
• Replaces Toro Part Number 115-4695
• Set of 2 Wheels included
• Designed with Skid Resistant Tread for improved traction
• Specifically engineered for Rear Wheel Drive (RWD) lawn mowers

3.2 Compatible Lawn Mower Models

These RWD Rear Drive Wheels are compatible with the following 22-inch Toro Recycler Lawn Mower models:

• 20332, 20332C
• 20333, 20333C
• 20334, 20334C
• 20338
• 20352
• 20372
• 20373
• 20374
• 20376
• 20955 (55cm Recycler Lawn Mower)
• 20956 (55cm Recycler Lawn Mower)
• 20958 (55cm Recycler Lawn Mower)

Note: Always verify your specific lawn mower model number to ensure compatibility before purchasing og montering af reservedele.

4. Opsætning og installation

The following are general steps for replacing a lawn mower wheel. Specific procedures may vary depending on your mower model. Refer to your mower's owner's manual for detailed instructions.

1. Forbered plæneklipperen:
   • Sørg for, at motoren er kølig.
   • Frakobl tændrørskablet for at forhindre utilsigtet start.
   • If the mower has a fuel tank, ensure it is less than half full and tilt the mower so the carburetor side is facing up to prevent fuel leakage.
   • Securely prop the mower on a stable surface, ensuring the wheel to be replaced is accessible and the mower cannot tip over.
2. Fjern det gamle hjul:
   • Locate the retaining bolt or nut that secures the wheel to the axle. This may be covered by a hubcap or dust cover.
   • Use an appropriate wrench or socket to loosen and remove the bolt/nut.
   • Carefully slide the old wheel off the axle. Note the position of any washers or spacers.
3. Monter det nye hjul:
   • Ensure the axle is clean and free of debris.
   • Align the new Toro RWD Rear Drive Wheel (Part 138-3216) with the axle. Ensure any washers or spacers are correctly positioned as they were on the old wheel.
   • Slide the new wheel onto the axle.
   • Sæt fastholdelsesbolten eller møtrikken i igen. Spænd den godt fast, men overspænd den ikke, da dette kan beskadige hjulet eller akslen.
4. Test installationen:
   • Gently spin the newly installed wheel to ensure it rotates freely without binding.
   • Lower the mower back to its operating position.
   • Tilslut tændrørsledningen igen.
   • Briefly operate the mower to confirm proper wheel function and traction.

If you encounter any difficulties, consult a qualified service technician or refer to your mower's detailed service manual.

5. Driftsmæssige overvejelser

These RWD Rear Drive Wheels are designed to provide effective traction for your self-propelled Toro lawn mower. Proper operation of your mower, including maintaining appropriate ground speed and avoiding obstacles, will contribute to the longevity and performance of these wheels.

• Trækkraft: The skid-resistant tread pattern is designed to maximize grip on various lawn surfaces.
• Manøvredygtighed: Ensure wheels are free of debris to allow for smooth turning and movement.
• Selv slid: Operating the mower on relatively flat surfaces and avoiding excessive turns in one direction can help promote even wear across both rear wheels.

6. Vedligeholdelse

Regular maintenance of your lawn mower's wheels can extend their lifespan and ensure continued optimal performance.

• Regelmæssig rengøring: After each use, clean any grass clippings, dirt, or debris from around the wheels and axles. Accumulated debris can hinder rotation and cause premature wear.
• Undersøg for slitage: Periodically inspect the wheel treads for signs of excessive wear, cracks, or damage. Worn treads can reduce traction.
• Tjek for afspilning: Check if the wheels have excessive side-to-side play on the axle. If so, ensure the retaining bolt/nut is tight. If play persists, inspect the axle or wheel hub for wear.
• Smøring (hvis relevant): Some mower axles may benefit from light lubrication. Consult your mower's manual for specific lubrication recommendations for the wheel axles. Avoid lubricating the wheel tread.
• Opbevaring: Når plæneklipperen opbevares i længere perioder, skal du sørge for, at hjulene er rene og tørre.

7. Fejlfinding

This section addresses common issues related to lawn mower wheels. For more complex problems, consult a professional technician.

8. Specifikationer

9. Garanti og support

As a Genuine Toro OEM part, these wheels are manufactured to Toro's high standards. For specific warranty information regarding genuine Toro replacement parts, please refer to the warranty documentation provided with your original Toro lawn mower or visit the official Toro webwebsted.

For technical support, parts inquiries, or to locate an authorized Toro service dealer, please visit the official Toro website or contact Toro customer service directly. Always provide your product model and serial number when seeking support.

Toro Officiel Webwebsted: www.toro.com

Image 9.1: Official Toro Brand Logo.