Tempur-Pedic TP7000 Mesh Back Fabric Task Chair Instruction Manual

1. Introduktion

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair. Please read all instructions carefully before use and retain this manual for future reference.

2. Sikkerhedsoplysninger

• Maksimal vægtkapacitet: This chair is designed to support a maximum weight of 250 pounds (113 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Tiltænkt brug: This chair is intended for office and task use. Do not use it for purposes other than its intended design.
• Forsamling: Ensure all components are securely fastened before using the chair. Periodically check all bolts and screws for tightness.
• Stabilitet: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side or the back, as this may cause the chair to tip over.
• Børn: Keep children away from the chair during assembly. Do not allow children to play on or around the chair.

3. Pakkens indhold

Før monteringen påbegyndes, skal du kontrollere, at alle dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, må du ikke fortsætte monteringen. Kontakt kundesupport for at få hjælp.

• Chair Back (Mesh)
• Chair Seat (Fabric with Tempur Material)
• Armlæn (2)
• Chair Base (5-star with casters)
• Gas Lift cylinder
• Mekanismeplade
• Hardwarepakke (skruer, skiver, unbrakonøgle)

4. Opsætning og montering

Follow these steps to assemble your Tempur-Pedic TP7000 Task Chair. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

1. Fastgør hjul til basen: Sæt de fem hjul ind i hullerne for enden af ​​hvert ben på stolebasen. Tryk godt til, indtil de klikker på plads.
2. Indsæt gasløft: Placer gasløftecylinderen i det midterste hul på den samlede stolebase.
3. Fastgør mekanismepladen til sædet: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Fastgør armlæn til sæde: Attach the armrests to the sides of the chair seat using the designated screws. Do not fully tighten yet.
5. Attach Backrest to Seat/Mechanism: Align the backrest with the mounting points on the mechanism plate or seat. Secure with screws. Once the backrest is attached, fully tighten all armrest screws.
6. Tilslut sædeenheden til gasliften: Placer forsigtigt det samlede sæde og ryglæn på gasliftcylinderen, og sørg for, at den koniske ende af gasliften passer sikkert ind i mekanismepladen.

5. Betjeningsvejledning (Justeringer)

Your Tempur-Pedic TP7000 chair offers several adjustments to customize your seating experience for optimal comfort and support.

• Sædehøjdejustering: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Højdejustering af armlæn: Press the button on the side of each armrest and move the armrest up or down to your preferred height. Release the button to lock it in place.
• Vippelås/oplåsning: The chair features a single reclining position. To allow the chair to recline, pull the lever (usually the same as the height adjustment lever, or a separate one) outwards. To lock the chair in an upright position, push the lever inwards.
• Justering af hældningsspænding: Rotate the round knob located under the front of the seat to adjust the tension of the recline. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

6. Vedligeholdelse

Korrekt pleje vil forlænge din stols levetid og udseende.

• Rensning: The fabric seat and mesh back should be spot cleaned only. Use a mild detergent and a damp cloth. Do not saturate the fabric. Test any cleaning solution on an inconspicuous area first.
• Inspektion: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten as necessary.
• Hjul: Hold hjulene fri for hår og snavs for at sikre en jævn bevægelse.
• Undgå barske kemikalier: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the chair's materials.

7. Fejlfinding

Hvis du støder på problemer med din stol, kan du se følgende almindelige problemer og løsninger:

• Chair Sinks or Does Not Stay Up:
  Løsning: Gasløftcylinderen kan være defekt. Kontakt kundesupport for at få en udskiftning.
• Stolens knirken:
  Løsning: Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
• Hjulene ruller ikke jævnt:
  Løsning: Fjern hår eller snavs, der har viklet sig rundt om hjulene. Rengør hjulene med enamp klæde.
• Stolen kan ikke lænes tilbage:
  Løsning: Ensure the tilt lock lever is disengaged (pulled outwards). Adjust the tilt tension knob counter-clockwise to reduce tension.

8. Specifikationer

9. Garanti og support

Your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair is backed by a Livstid begrænset garanti. This warranty covers defects in materials and workmanship under normal use. Specific terms and conditions apply.

For warranty claims, technical support, or to order replacement parts, please contact Tempur-Pedic customer service. Refer to your purchase documentation or the official Tempur-Pedic webhjemmeside for de seneste kontaktoplysninger.

When contacting support, please have your model number (TP7000) and proof of purchase readily available.