Hagibis ZN1 usynlig bærbar laptopstander brugermanual

1. Introduktion

Thank you for choosing the Hagibis ZN1 Invisible Portable Laptop Stand. This stand is designed to enhance your computing experience by providing adjustable height, improved ergonomics, and efficient heat dissipation for your laptop or tablet. Its compact and portable design makes it an ideal accessory for various environments.

2. Pakkens indhold

• 1 Pair of Hagibis ZN1 Invisible Portable Laptop Stands (Grey)

3. Opsætningsvejledning

Follow these steps to properly attach the Hagibis ZN1 stands to your device:

1. Rengør overfladen: Ensure the bottom surface of your laptop or keyboard where the stands will be attached is clean and free of dust or grease.
2. Fjern klæbemiddelbagside: Carefully peel off the protective film from the 3M VHB adhesive on the back of each stand.
3. Position the Stands: Place the stands on the desired locations on the bottom of your device. For laptops, position them near the rear edge, ensuring they do not obstruct vents or ports. For keyboards, place them at the rear corners.
4. Påfør tryk: Press firmly on each stand for at least 30 seconds to ensure a strong bond with the adhesive. Allow the adhesive to cure for a few hours before applying significant weight or stress.

4. Betjeningsvejledning

The Hagibis ZN1 stand offers three adjustable height settings for optimal comfort and airflow.

Justering af højde:

1. Folded Position: When folded flat against the device, the stands are invisible and add minimal thickness.
2. First Height (10mm): Gently pull out the first segment of the stand until it clicks into place. This provides a subtle 10mm lift.
3. Second Height (20mm): Extend the stand further by pulling out the second segment. This provides a 20mm lift.
4. Third Height (36mm): Fully extend the stand to achieve the maximum 36mm lift.

To fold the stands back, gently push the segments back into their original position until they are flat against the device.

5. Funktioner og fordele

Forbedret varmeafledning:

The aluminum alloy construction of the Hagibis ZN1 stand acts as a thermal conductor, helping to dissipate heat from your device. The elevated position and open design promote better airflow, preventing overheating and maintaining optimal performance.

Ergonomisk design:

By raising your laptop or keyboard, the stand helps to elevate your screen to a more comfortable viewing height, reducing strain on your neck and shoulders. This promotes a more ergonomic posture during extended use.

Invisible and Portable:

When folded, the stands are designed to be discreet and compact, making them easy to carry with your device without adding bulk. The strong 3M adhesive ensures they remain securely attached.

Holdbare materialer:

Constructed from zinc alloy for high strength and durability, and featuring silica gel pads to prevent slipping and protect your device. The 3M double-sided adhesive tape provides long-lasting viscosity and high temperature resistance.

6. Kompatibilitet

The Hagibis ZN1 Invisible Portable Laptop Stand is widely compatible with:

• Laptops ranging from 12 to 17 inches (e.g., MacBook 12/13, MacBook Air 13, MacBook Pro 13/15, Google Pixelbook, Dell XPS, HP, ASUS, Lenovo ThinkPad, Acer Chromebook).
• Tablet PCs and other notebook computers between 10 and 15.6 inches.
• Keyboards that can benefit from an adjustable tilt.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your Hagibis ZN1 stands:

• Rensning: Wipe the stands with a soft, damp cloth to remove dust or smudges. Avoid using harsh chemicals or abrasive cleaners.
• Pleje af klæbemiddel: The 3M adhesive is designed for long-term use. Avoid frequent repositioning, as this may weaken the bond.
• Opbevaring: When not in use, ensure the stands are folded flat to prevent accidental damage.

8. Fejlfinding

Stand not adhering properly:

• Ensure the application surface was clean and dry before attachment.
• Apply firm pressure for the recommended duration during installation.
• Allow sufficient curing time for the adhesive (ideally 24 hours) before heavy use.

Stativet føles ustabilt:

• Verify that both stands are extended to the same height setting.
• Sørg for, at enheden er placeret på en flad, stabil overflade.
• Check that the stands are securely attached to the device.

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the official Hagibis webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.