Sena 10C EVO Bluetooth-kamera og kommunikationssystem brugermanual

Indledning

This user manual provides comprehensive instructions for the Sena 10C EVO Bluetooth Camera and Communication System. The 10C EVO integrates Sena's leading Bluetooth communication platform with an advanced 4K camera, designed for seamless rider communication and high-quality video recording. Its compact and aerodynamic design is optimized for helmet integration, minimizing wind resistance and noise.

Please read this manual thoroughly before using your device to ensure proper operation and to maximize your experience.

Image: The Sena 10C EVO unit, featuring the main communication module, two helmet speakers, and two microphone options (boom and wired lavalier), all connected by wires. The main unit has a control dial and a camera lens.

Pakkens indhold

Upon opening your Sena 10C EVO package, please verify that all components are present and in good condition. The standard package typically includes:

• Sena 10C EVO Main Unit
• Hjelm Clamp Kit
• Limet overflademonteringsadapter
• Helmet Speakers (Pair)
• Bom mikrofon
• Kablet mikrofon
• USB strøm- og datakabel
• Højttalerpuder
• Krog og løkkebefæstelser til højttalere
• Hook and Loop Fasteners for Boom Microphone
• Krog og løkkebefæstelser til kablet mikrofon
• Bom mikrofon holder
• Unbrakonøgle
• Brugervejledning (dette dokument)

Opsætning og installation

Proper installation of the Sena 10C EVO is crucial for optimal performance and user comfort. Follow these steps carefully.

1. Montering af hovedenheden

The 10C EVO can be mounted to most helmets using either the clamp kit or the glued surface mounting adapter.

• Clamp Kit: Skub clamp between the helmet shell and the inner padding. Ensure it is securely fastened.
• Adapter til limet overflademontering: Clean the desired mounting area on the helmet surface thoroughly. Peel off the adhesive backing and firmly press the adapter onto the helmet for at least 60 seconds. Allow 24 hours for the adhesive to fully cure before use.

Billede: En detaljeret view of the Sena 10C EVO main unit, showing its compact form factor and how it integrates with a helmet mounting bracket.

2. Installing Speakers

Attach the speakers to the inside of your helmet using the provided hook and loop fasteners. Position them directly over your ears for optimal audio clarity.

Image: A close-up of the two flat, circular helmet speakers, designed to fit inside a helmet, with their connecting wires.

3. Installing Microphones

Choose between the boom microphone (for open-face or modular helmets) or the wired microphone (for full-face helmets).

• Boom-mikrofon: Attach the boom microphone to the inside of the helmet near your mouth using the boom microphone holder and hook and loop fasteners.
• Kablet mikrofon: Attach the wired microphone to the inside of the helmet near your mouth using hook and loop fasteners.

Billede: En detaljeret view of the two microphone options: a flexible boom microphone with a foam cover and a smaller wired microphone, both designed for helmet integration.

4. Tilslutning af komponenter

Connect the speaker and microphone cables to the corresponding ports on the main 10C EVO unit. Ensure all connections are secure.

Betjeningsvejledning

Tænd/sluk

• Tænd: Tryk og hold på Center-knap og den Telefon knap i 1 sekund.
• Sluk: Tryk og hold på Center-knap og den Telefon knap i 5 sekunder.

Bluetooth-parring

To pair your 10C EVO with a Bluetooth-enabled device (e.g., smartphone, GPS):

1. With the 10C EVO powered off, press and hold the Telefon knap for 5 seconds until the LED flashes red and blue.
2. Aktiver Bluetooth på din smartphone, og søg efter enheder.
3. Select "Sena 10C EVO" from the list of detected devices.
4. If prompted, enter PIN "0000".

Intercom kommunikation

The 10C EVO supports four-way Bluetooth intercom communication up to 1.6 km (1 mile) in open terrain.

• Start af intercom: Tryk på Center-knap once to connect with the first paired intercom friend. Tap twice for the second, and three times for the third.
• Afslutning af intercom: Tryk på Center-knap engang.

Kamerabetjening

The integrated camera captures video at 4K/30FPS.

• Start optagelse: Tryk og hold på Kamera knap i 1 sekund.
• Stop optagelse: Tryk og hold på Kamera knap i 1 sekund igen.
• Video Tagging: The 10C EVO supports video tagging, allowing you to save specific moments from your ride. Refer to the Sena Utility App for detailed instructions on configuring and using this feature.

Musik og lyd

• Afspil/sæt musik på pause: Tryk og hold på Center-knap i 1 sekund.
• Lydstyrke op: Drej på Jog Dial med uret.
• Skrue ned for lyden: Drej på Jog Dial mod uret.
• Næste nummer: Tryk på Jog Dial knappen frem.
• Forrige nummer: Tryk på Jog Dial button backward.

The Smart Audio Mix feature allows you to blend intercom audio with music or GPS directions.

Vedligeholdelse og pleje

To ensure the longevity and optimal performance of your Sena 10C EVO, follow these maintenance guidelines:

• Rensning: Tør hovedenheden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Vandtæthed: The 10C EVO is designed to be water-resistant, but it is not waterproof. Avoid submerging the device in water.
• Batteripleje: The device uses a Lithium Polymer battery. For best battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if it will be stored for extended periods.
• Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Firmwareopdateringer: Regularly check for and install firmware updates using the Sena Device Manager software. Updates often include performance improvements and new features.

Fejlfinding

If you encounter issues with your Sena 10C EVO, refer to the following common troubleshooting steps:

Enheden tænder ikke

• Sørg for, at batteriet er opladet. Tilslut enheden til en strømkilde med USB-kablet.
• Perform a factory reset (refer to the full Sena manual or Sena website for specific instructions, as this often involves a combination of button presses).

No Audio from Speakers

• Check that the speakers are securely connected to the main unit.
• Verify that the volume is not set to minimum.
• Ensure the speakers are correctly positioned over your ears inside the helmet.

Intercom Connection Issues

• Ensure both devices are within the maximum intercom range (1.6 km).
• Re-pair the intercom devices.
• Check for any physical obstructions or strong electromagnetic interference.

Camera Recording Problems

• Ensure a compatible microSD card is inserted and has sufficient free space.
• Check the battery level, as low battery can prevent recording.
• Format the microSD card if issues persist (this will erase all data on the card).

Specifikationer

Garantioplysninger

Sena products are covered by a limited warranty from the date of purchase. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims.

For detailed warranty information, including coverage, exclusions, and how to make a claim, please visit the official Sena webwebstedet eller kontakt Sena kundesupport.

Kundesupport

For further assistance, technical support, or to download the latest firmware and user guides, please visit the official Sena webwebsted:

www.sena.com

You can also find FAQs and community forums on the Sena support portal.