1. Introduktion
The Meliconi AC 200 is a universal remote control designed for domestic air conditioners, offering broad compatibility with most brands. It provides control over essential functions and features a large, backlit screen for ease of use in various lighting conditions, including darkness. This manual will guide you through the proper setup, operation, and maintenance of your AC 200 remote control to ensure optimal performance.
Key features include a permanent memory that retains code settings, a built-in LED torch, and quick settings for both cooling and heating modes.
2. Opsætning
2.1. Batteriinstallation
The Meliconi AC 200 requires two 1.5V AAA/LR03 alkaline batteries (not included). To install the batteries:
- Åbn batteridækslet, der er placeret på bagsiden af fjernbetjeningen.
- Insert two AAA batteries, ensuring correct polarity (+ and - terminals match the indicators inside the compartment).
- Luk batterirummets dæksel forsvarligt.
2.2. Programmering af fjernbetjeningen
The AC 200 can be programmed to control your air conditioner using either an automatic search function or by manually entering a code. The remote control features permanent memory, so the code will not be lost when batteries are removed or replaced.
Automatic Search Function:
- Sørg for, at dit klimaanlæg er tændt.
- Point the AC 200 remote control towards the air conditioner.
- Tryk og hold på SÆT button until the code search indicator appears on the remote's display. The remote will begin transmitting codes.
- When your air conditioner responds (e.g., turns off, changes mode), immediately release the SÆT button. The code is now stored.
- Test all primary functions to ensure correct operation. If not all functions work, repeat the process to find an alternative code.
Manuel kodeindtastning:
- Identify your air conditioner brand from the compatibility list provided in the manual or on the Meliconi webwebsted.
- Locate the corresponding code(s) for your brand.
- Tryk og hold på SÆT button until the code entry mode is activated on the display.
- Use the temperature up/down buttons to enter the 3-digit code.
- Tryk på OK or SÆT button to confirm the code.
- Test all primary functions. If not all functions work, try the next code listed for your brand.
For a complete and updated list of compatible brands and codes, please visit the official Meliconi webwebsted: www.meliconi.com/ac200.
3. Betjening
3.1. Knapfunktioner
The Meliconi AC 200 remote control features clearly labeled buttons for intuitive operation:
- Power Button (Green): Turns the air conditioner On or Off.
- MODE knap: Skifter mellem driftstilstande (f.eks. Køling, Varme, Ventilator, Tørring, Auto).
- TEMP Buttons (Orange Up/Down Arrows): Adjusts the desired temperature.
- Ventilatorhastighedsknap: Justerer ventilatorhastigheden (f.eks. Lav, Mellem, Høj, Auto).
- Svingknap: Controls the air deflector movement.
- TIME ON / TIME OFF Buttons: Sets the timer for automatic power-on or power-off.
- FAST COOL / FAST HEAT Buttons: Activates quick cooling or heating modes.
- LED Torch Button (Light Bulb Icon): Activates the built-in LED torch.
- C/F knap: Toggles between Celsius and Fahrenheit temperature display.
- SET knap: Used for programming the remote control.
3.2. Skærmvisning
The large, backlit LCD screen displays current settings and status indicators:
- Temperatur display: Shows the set temperature in Celsius or Fahrenheit.
- Tilstandsikoner: Indicates the current operating mode (e.g., snowflake for cool, sun for heat, fan icon for fan mode).
- Indikator for blæserhastighed: Displays the selected fan speed.
- Timer TIL/FRA: Shows active timer settings.
- Batteriindikator: Alerts when batteries are low.
4. Vedligeholdelse
4.1. Udskiftning af batteri
When the battery indicator appears on the display or the remote's performance diminishes, replace the batteries. Follow the battery installation steps in Section 2.1. The permanent memory feature ensures that your programmed code will not be lost during battery replacement.
4.2. Rensning
Sådan rengøres fjernbetjeningen:
- Tør overfladen af med en blød, tør klud.
- Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the remote's finish or internal components.
- Avoid exposing the remote to excessive moisture.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen reagerer ikke. | Lave eller døde batterier; forkert batteriinstallation. | Replace batteries with new AAA alkaline batteries, ensuring correct polarity. |
| Air conditioner does not respond to commands. | Incorrect code programmed; remote not pointed at AC unit. | Ensure the remote is pointed directly at the air conditioner's receiver. Re-program the remote using the automatic search or manual code entry (Section 2.2). Try alternative codes for your brand. |
| Nogle funktioner virker ikke. | Code partially compatible; specific function not supported by AC model. | Try another code for your air conditioner brand. Some advanced functions may not be universally supported by all AC models. |
| Skærmen er svag eller flimrer. | Lave batterier. | Udskift batterierne. |
6. Specifikationer
- Mærke: Meliconi
- Modelnavn: AC 200
- Modelnummer: 802102
- Dimensioner: 11 x 18.5 x 3 cm
- Vægt: 120 gram
- Batterier: 2 x AAA/LR03 (not included)
- Compatible Peripherals: Aircondition
- Særlige funktioner: Universal compatibility, Backlit screen, LED torch, Permanent memory
- Maksimal rækkevidde: 10 meter
- Farve: Hvid
7. Garanti og support
The Meliconi AC 200 Universal Air Conditioner Remote Control typically comes with a 2-year warranty from the date of purchase. For detailed warranty terms, conditions, and to register your product, please refer to the documentation included in the product packaging or visit the official Meliconi webwebsted.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Meliconi customer service through their official webwebstedet eller kontaktoplysningerne, der er angivet på din produktemballage.
