SMALLRIG Hukommelseskort Etui 3192 Brugermanual

1. Produktet er slutview

The SMALLRIG Memory Card Case 3192 is designed for secure storage and protection of various memory card types. It features a robust construction to safeguard your cards from environmental factors and physical impact.

This case can accommodate the following memory card configurations:

• 6 x SD cards
• 6 x Micro SD cards
• 2 x CFexpress Type A cards
• 1 x CFexpress Type B card (or XQD card)

Figure 1: SMALLRIG Memory Card Case 3192, shown open with memory cards inserted.

Figure 2: The empty internal layout of the case, illustrating the custom-designed slots for various memory card formats.

2. Nøglefunktioner

• Høj kapacitet: Stores up to 15 memory cards of different types.
• Waterproof & Anti-Shock: Constructed from high-quality TPU and PC materials with an advanced silicone inner lining for protection against water, dust, and impacts.
• Letvægtsdesign: Weighs approximately 120g, making it portable for travel.
• Holdbar konstruktion: Passed a 2-meter drop test, ensuring robust protection for your memory cards.
• Ergonomic Locking System: Features an easy-to-operate snap-button for secure closure.

Figure 3: Illustration of compatible memory card types and their designated slots within the case.

Figure 4: The case demonstrating its shockproof capabilities, having passed a 2-meter drop test.

Figure 5: The case highlighting its splash-proof and dust-proof design, attributed to its built-in silicone lining.

Figure 6: The compact and lightweight design of the case, making it easy to carry.

3. Opsætning og drift

3.1 Åbning af sagen

To open the memory card case, locate the quick-locking snap-button on the front. Press the button firmly and lift the lid. The ergonomic design facilitates easy opening and closing.

Figure 7: Step-by-step instructions for operating the quick-locking snap-button to open the case.

3.2 Isætning af hukommelseskort

Each slot within the case is custom-fitted for specific memory card types. Gently align your memory card with the corresponding slot and press it down until it is securely seated. Avoid forcing cards into incorrect slots to prevent damage.

Figur 8: En detaljeret view of the custom-fit card slots, designed to hold various memory card types securely.

3.3 Removing Memory Cards

To remove a memory card, gently pull it upwards from its slot. Ensure the case is held level to prevent other cards from dislodging.

3.4 Afslutning af sagen

After inserting or removing cards, close the lid and press down until the snap-button audibly clicks into place. This ensures the case is securely sealed, maintaining its waterproof and dustproof integrity.

4. Vedligeholdelse

4.1 Rengøring

For at rengøre ydersiden af ​​kabinettet skal du tørre det af med en blød kludamp cloth. For the interior silicone lining, use a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the case's protective properties.

4.2 Opbevaring

Store the memory card case in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Ensure the case is closed and latched to prevent dust and moisture ingress.

5. Fejlfinding

5.1 Case Does Not Close Securely

• Check if any memory cards are improperly seated or protruding from their slots.
• Ensure no debris is obstructing the locking mechanism or the sealing gasket.

5.2 Cards Feel Loose in Slots

• Verify that the correct type of memory card is inserted into the designated slot. Each slot is designed for a specific card size.

6. Specifikationer

7. Garanti og support

For warranty information and customer support, please refer to the official SMALLRIG webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.

Fabrikant: SMALLRIG

Webwebsted: www.smallrig.com