1. Introduktion
Thank you for choosing the HTVRONT Automatic Heat Press Machine. This manual provides essential information for the safe and efficient operation of your new heat press. Please read this manual thoroughly before first use and keep it for future reference. This machine is designed for heat transfer projects on various materials such as T-shirts, bags, and caps, offering automatic pressing and release for ease of use.
2. Sikkerhedsoplysninger
Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektriske apparater, for at mindske risikoen for brand, elektrisk stød og personskade.
- Læs alle instruktioner før brug af apparatet.
- Rør ikke ved varme overflader. Brug håndtag eller knopper.
- To protect against electrical shock, do not immerse cord, plugs, or heating elements in water or other liquid.
- Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af børn.
- Træk stikket ud af stikkontakten, når det ikke er i brug, og før rengøring. Lad det køle af, før du sætter dele på eller af.
- Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
- Brug af tilbehør, der ikke er anbefalet af apparatets producent, kan forårsage skader.
- Må ikke bruges udendørs.
- Lad ikke ledningen hænge ud over kanten af bordet eller bordpladen eller røre ved varme overflader.
- Må ikke placeres på eller i nærheden af en varm gas- eller elektrisk brænder eller i en opvarmet ovn.
- Der skal udvises ekstrem forsigtighed ved flytning af et apparat, der indeholder varm olie eller andre varme væsker.
- Sæt altid stikket i apparatet først, og sæt derefter ledningen i stikkontakten. For at afbryde forbindelsen skal du slukke for en vilkårlig knap og derefter tage stikket ud af stikkontakten.
- Brug ikke apparatet til andet end tilsigtet brug.
- The machine features an auto shut-off function after 15 minutes of inactivity to prevent overheating.
3. Produktet er slutview og komponenter
Familiarize yourself with the main parts of your HTVRONT Automatic Heat Press Machine.
Figur 3.1: Forside view of the HTVRONT Automatic Heat Press Machine.
Figure 3.2: Key components of the HTVRONT Automatic Heat Press.
- Digital skærmvisning: Viser temperatur- og tidsindstillinger.
- Kontrolpanel: Buttons for power, temperature/time adjustment, mode selection, and start/stop.
- Automatic Lifting Structure: Automatically lowers and raises the heating plate.
- Thermal Insulation Cover: Provides heat protection.
- Stor varmeplade: 15x15 inch surface for heat transfer.
- Three-section Buffer Slider: Ensures smooth and stable movement of the tray.
- Large Ironing Board (Tray): Pull-out drawer design for easy placement of materials.
- Maskinbase: Giver stabilitet til enheden.
Figure 3.3: Dual-zone heating engine for fast and even heat distribution.
4. Opsætning
- Unboxing: Carefully remove the heat press from its packaging. Retain packaging for future storage or transport.
- Placering: Place the machine on a stable, flat, and heat-resistant surface. Ensure there is adequate clearance around the machine for ventilation and safe operation.
- Strømtilslutning: Sæt netledningen i en jordet 110V AC-stikkontakt.
- Første gang tændt: Press the power button on the control panel to turn on the machine. The display will light up.
Video 4.1: En overview of the HTVRONT 15X15 Inches Automatic Heat Press Machine, demonstrating its features and setup. This video is provided by the seller.
5. Betjeningsvejledning
The HTVRONT Automatic Heat Press Machine offers both manual and automatic modes for efficient heat transfer.
Figure 5.1: Control panel with temperature and time display.
Figure 5.2: Setting temperature and time on the control panel.
5.1. Indstilling af temperatur og tid
- Tryk på Temperatur/tidsindstilling button (usually indicated by a thermometer or clock icon) to toggle between temperature and time settings.
- Brug + og - buttons to adjust the desired temperature (in Fahrenheit or Celsius) and time (in seconds).
- The machine will automatically begin heating to the set temperature.
5.2. Using Preset and Custom Modes
The machine features 4 fast modes and 2 user-defined custom modes for quick setup.
- Forudindstillede tilstande: Tryk på Mode button (often a gear or settings icon) to cycle through the 4 preset modes. Each mode has pre-configured temperature and time settings suitable for common materials like HTV, glitter HTV, heat transfer paper, and sublimation paper.
- Brugerdefinerede tilstande: To set a custom mode, adjust the temperature and time manually. Then, press and hold one of the custom mode buttons (if available, typically indicated by a star or 'C' icon) to save your settings.
5.3. Automatic Pressing Process
- Forbered materiale: Pull out the ironing board (tray) using the handle. Place your material (e.g., T-shirt) and heat transfer design onto the tray. Ensure the material is flat and properly positioned.
- Indsæt bakke: Push the tray completely into the machine. The machine will detect the material's thickness.
- Start med at trykke: Tryk på R button (Release/Start) to initiate the automatic pressing cycle. The heating plate will automatically lower and apply pressure based on the material's thickness.
- Auto Release: Once the set time countdown ends, the machine will automatically release the material and the heating plate will rise.
- Fjern materiale: Pull out the tray and carefully remove your heat-pressed item.
Figure 5.3: Pullout drawer design for safe material placement.
Figure 5.4: Broad application of the heat press for various projects.
6. Vedligeholdelse
Korrekt vedligeholdelse sikrer din varmepresses levetid og optimale ydeevne.
- Cleaning the Heat Plate: After the machine has cooled down completely, wipe the heat plate with a soft, damp cloth to remove any residue. For stubborn stains, use a non-abrasive cleaner specifically designed for heat press platens.
- Generel rengøring: Tør maskinens yderside af med en tør eller let fugtig klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: When not in use, store the heat press in a dry, dust-free environment.
- Regelmæssig inspektion: Periodically check the power cord for any signs of damage. Ensure all moving parts operate smoothly.
7. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på med din varmepresse.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Maskinen tænder ikke. | Power cord not properly connected; Power outlet malfunction. | Sørg for, at netledningen er sat ordentligt i en fungerende stikkontakt. Kontroller afbryderen. |
| Machine beeps continuously and does not press. | Tray not fully inserted; Obstruction preventing full closure. | Ensure the pull-out tray is pushed completely into the machine. Check for any items blocking the tray's path. |
| Temperature error or machine cuts off at high temperature. | Overheating; Sensor malfunction. | Allow the machine to cool down. If the issue persists, contact customer support. Ensure proper ventilation around the machine. |
| Ujævn varmeoverførsel. | Material not flat; Residue on heat plate; Incorrect temperature/time settings. | Ensure material is flat and smooth. Clean the heat plate. Verify temperature and time settings are appropriate for your material. |
| Automatic release not working. | Problem med den interne mekanisme. | Power cycle the machine. If the problem continues, contact customer support. |
If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact HTVRONT customer support for assistance.
8. Specifikationer
Key technical specifications for the HTVRONT Automatic Heat Press Machine.
Figur 8.1: Produktmål.
| Feature | Specifikation |
|---|---|
| Modelnummer | SG-RYJ-0044 |
| Mærke | HTVRONT |
| Produktmål (L x B x H) | 19.68 x 15.74 x 11.81 tommer |
| Varens vægt | 40.1 pund (18.23 kilo) |
| Øverste temperaturvurdering | 410 grader Fahrenheit (210 grader Celsius) |
| Voltage | 110 volt |
| Anbefalede anvendelser | T-shirt, taske, kasket |
| Materiale | Vinyl |
| Farve | Lyseblå |
| Certificering | FCC certificeret |
9. Garanti og support
Garantiperiode: The warranty period for this HTVRONT Automatic Heat Press Machine is 1 year from the date of purchase.
Kundesupport: If you have any questions, concerns, or require technical assistance with your HTVRONT Automatic Heat Press Machine, please do not hesitate to contact HTVRONT customer support. Please refer to the contact information provided with your product packaging or visit the official HTVRONT webwebsted for supportdetaljer.
When contacting support, please have your model number (SG-RYJ-0044) and purchase date ready to expedite the process.
