Secretlab Titan Evo Ash Gaming Chair Instruction Manual

1. Introduktion

This instruction manual provides essential information for the safe and effective use of your Secretlab Titan Evo Ash Gaming Chair. Please read this manual thoroughly before assembly and operation to ensure proper setup and to maximize the chair's features. Retain this manual for future reference.

Billede 1.1: Forside view of the Secretlab Titan Evo Ash Gaming Chair.

2. Sikkerhedsoplysninger

• Maksimal vægtanbefaling: Do not exceed the maximum weight recommendation of 285 pounds (129 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Forsamling: Assembly may require tools and safety precautions. Follow all assembly steps carefully.
• Placering: Use the chair on a stable, level surface.
• Rensning: Refer to the maintenance section for proper cleaning instructions.

3. Opsætning og montering

The Secretlab Titan Evo chair is designed for straightforward assembly. All necessary tools are typically included. It is recommended to assemble the chair in the intended use area.

3.1 Udpakning og klargøring

1. Åbn forsigtigt emballagen, og fjern alle komponenter.
2. Lay out all parts on a clean, flat surface, preferably on the provided protective mat or a soft cloth to prevent scratches.
3. Verify that all components listed in the parts list (usually found in a separate quick-start guide) are present.

3.2 Monteringstrin

While specific steps may vary slightly, the general assembly process involves:

1. Attach Casters to Wheelbase: Insert the casters into the holes on the star-shaped wheelbase until they click into place.
2. Installer gaslift: Place the gas lift cylinder into the center hole of the wheelbase.
3. Attach Seat Base to Mechanism: Secure the multi-tilt mechanism to the underside of the seat base using the provided screws.
4. Tilslut ryglænet til sædebasen: Align the backrest with the seat base and secure it using the side brackets and screws.
5. Montering af armlæn: Attach the 4D armrests to the designated points on the seat base.
6. Combine Upper and Lower Sections: Placer det samlede sæde og ryglæn på gasløftcylinderen.

Image 3.1: The Secretlab Titan Evo Ash Gaming Chair in a typical usage environment.

Billede 3.2: Foran og bagpå views of the chair, illustrating its design.

4. Betjeningsvejledning

The Secretlab Titan Evo chair offers multiple adjustment options to customize your seating experience.

4.1 Højdejustering

To adjust the chair's height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise it. Release the lever at the desired height.

4.2 Hældningsfunktion

The backrest can recline up to 165 degrees. To recline, pull the lever on the right side of the chair (near the backrest hinge) upwards and lean back. Release the lever to lock the backrest in position.

4.3 Multi-Tilt Mechanism

The multi-tilt mechanism allows the entire seat and backrest to tilt simultaneously. A lever on the left side beneath the seat controls this function. Pull the lever out to enable tilt, and push it in to lock the tilt angle. A tension knob beneath the seat (usually at the front) adjusts the resistance of the tilt.

4.4 4D Armrests

The 4D armrests offer four directions of adjustment:

• Højde: Press the button on the side of the armrest support and move the armrest up or down.
• Frem/tilbage: Skub armlænspuden fremad eller bagud.
• Left/Right (Pivot): Drej armlænspuden til venstre eller højre.
• Indad/Udad: Slide the armrest pad inward or outward.

4.5 Magnetic Head Pillow

The memory foam magnetic head pillow attaches to the backrest without straps. Adjust its position by sliding it up or down the backrest to find optimal neck support. The magnets will hold it in place.

Image 4.1: Detail of the magnetic head pillow for adjustable neck support.

4.6 4-Way Lumbar Support

The built-in 4-way adjustable lumbar support is controlled by a knob on the right side of the backrest. Rotate the knob to adjust the depth and height of the lumbar support to conform to your spine.

Image 4.2: The lumbar support adjustment knob, allowing for personalized back support.

Image 4.3: A user seated in the chair, illustrating the recommended posture and chair sizing.

5. Vedligeholdelse

Regular maintenance helps preserve the appearance and functionality of your Secretlab Titan Evo chair.

5.1 Rengøring

The chair's leatherette surface is designed for durability and ease of cleaning. To clean, simply wipe with a damp klud. Undgå at bruge skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige materialet.

Image 5.1: Detail of the Secretlab NEO Hybrid Leatherette, known for its durability.

5.2 Generel pleje

• Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme. Efterspænd om nødvendigt.
• Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the material's lifespan.
• Ensure casters are free of debris to maintain smooth movement.

6. Fejlfinding

This section addresses common issues you might encounter with your Secretlab Titan Evo chair.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Secretlab Customer Support.

7. Specifikationer

8. Garantioplysninger

The Secretlab Titan Evo Ash Gaming Chair comes with an extended warranty for peace of mind. Secretlab offers up to a 5-year extended warranty. For specific terms and conditions, including registration requirements, please refer to the official Secretlab webwebsted eller kontakt kundesupport.

9. Kundesupport

For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Secretlab Customer Support. You can typically find contact information on the official Secretlab webwebsted eller via din købsplatform.

When contacting support, please have your model number (M07-E24PU-ASHHH3R) and proof of purchase readily available.