Indledning
This manual provides essential information for the safe and efficient operation of your Mirage SETCLF121T Mini Split Air Conditioner Life 12 Plus. Please read it thoroughly before installation and use, and retain it for future reference. The Mirage Life 12 Plus is a conventional (non-inverter) cooling-only unit designed for superior efficiency within its category, offering advanced features for enhanced comfort.
Sikkerhedsoplysninger
Vigtige sikkerhedsinstruktioner:
- Installationen skal udføres af kvalificeret personale i overensstemmelse med lokale og nationale el-forskrifter.
- Ensure the power supply matches the unit's specifications (230V).
- Do not attempt to repair or modify the unit yourself. Contact authorized service personnel.
- Hold området omkring udendørsenheden fri for forhindringer.
- Stik ikke genstande ind i luftudløbet eller -indtaget.
- Clean air filters regularly to maintain efficiency and air quality.
- Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
Pakkens indhold
Upon unpacking, verify that the following items are included:
- Indendørsenhed (fordamper)
- Udendørsenhed (kondensator)
- Fjernbetjening
- Instruktionsmanual (dette dokument)
- Garantikort
- Installation Accessories (e.g., mounting plate, drainage hose, insulation tape - specific items may vary)
Produkt overview
The Mirage SETCLF121T Life 12 Plus Mini Split Air Conditioner is designed for efficient cooling. Key features include:
- Udvendig beskyttelse: Enhanced protection for both indoor and outdoor units, increasing resistance to external factors.
- Wi-Fi Mulighed: Compatible with an optional Wi-Fi harness and interface for smartphone control and monitoring from anywhere.
- Anti-fryse funktion: Prevents damage to the unit by avoiding freezing or water leakage.
- Remote Control Temperature Sensor: Ensures uniform temperature distribution throughout the room.
- Kølemiddellækagedetektor: Protects the unit from damage in case of refrigerant gas loss.

Figur 1: Forside view of the Mirage SETCLF121T indoor unit, showcasing its sleek white design and branding.

Figur 2: Vinklet view of the indoor unit, highlighting its compact form factor.

Figure 3: The advanced remote control with a large illuminated display for easy operation and status monitoring.

Figure 4: Diagram illustrating the dimensions of the indoor unit: 80.2 cm (length) x 20 cm (width) x 29.5 cm (height).
Opsætning og installation
Professionel installation anbefales:
The installation of a mini split air conditioner involves electrical wiring, refrigerant line connections, and proper drainage setup. For safety and optimal performance, it is highly recommended that installation be performed by a certified HVAC technician.
General Installation Steps (for reference only):
- Placering af indendørsenhed: Select a location that allows for even air distribution, proper drainage, and easy access for maintenance.
- Placering af udendørsenhed: Choose a stable, well-ventilated area away from direct sunlight and heat sources, ensuring sufficient clearance for airflow.
- Boring af væghul: Create a hole through the wall for refrigerant piping, drainage hose, and electrical cables.
- Refrigerant Line Connection: Connect the copper refrigerant lines between the indoor and outdoor units, ensuring proper flaring and tightening to prevent leaks.
- Elektriske ledninger: Connect the power supply and communication cables according to the wiring diagram provided in the full installation manual.
- Opsætning af dræning: Ensure the drainage hose is properly sloped to allow for continuous water flow away from the unit.
- Støvsugning og opladning: Evacuate the refrigerant lines to remove air and moisture, then check for leaks and charge with refrigerant if necessary.
- Testkørsel: Perform a test run to ensure all functions operate correctly and the unit cools effectively.
Betjeningsvejledning
Your Mirage SETCLF121T is controlled via the included remote control. The remote features an illuminated display showing the current status and settings.
Fjernbetjeningsfunktioner:
- TIL/FRA: Tænder eller slukker for enheden.
- TEMP (+/-): Justerer den ønskede temperaturindstilling.
- KØRSELSVEJLEDNING: Cycles through available operating modes (e.g., Cool, Fan, Dry). This model is primarily for cooling.
- SVINGE: Activates or deactivates the automatic vertical louver swing for even air distribution.
- BLÆSERHASTIGHED: Justerer ventilatorhastigheden (f.eks. Lav, Mellem, Høj, Auto).
- TIMER TIL/FRA: Sets a specific time for the unit to turn on or off automatically.
- SOVE: Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep and energy saving.
- TURBO: Engages maximum cooling power for rapid temperature reduction.
- SKÆRM: Toggles the display on the indoor unit.
- HUKOMMELSE: Recalls preferred settings.
- LÅSE: Locks the remote control buttons to prevent accidental changes.
- NULSTIL: Resets the remote control settings.
Wi-Fi Control (Optional): If the optional Wi-Fi harness and interface are installed, you can control and monitor your unit using a compatible smartphone application. Refer to the Wi-Fi module's specific instructions for setup and usage.
Opretholdelse
Regelmæssig vedligeholdelse sikrer dit klimaanlægs levetid og effektivitet.
1. Air Filter Cleaning:
- Åbn frontpanelet på indendørsenheden.
- Fjern luftfiltrene.
- Clean filters with a vacuum cleaner or wash them with lukewarm water and mild detergent.
- Lad filtrene tørre helt, før de monteres igen.
- Rengør filtrene hver anden uge eller oftere afhængigt af brug og luftkvalitet.
2. Unit Exterior Cleaning:
- Tør ydersiden af både inde- og udedelen af med en blød klud.amp klæde.
- Brug ikke skrappe kemikalier, slibemidler eller opløsningsmidler.
3. Seasonal Checks:
- Before the cooling season, ensure the outdoor unit is free of debris.
- Check for any unusual noises or odors during operation.
- Consider professional inspection annually to check refrigerant levels and overall system health.
Fejlfinding
Før du kontakter service, skal du kontrollere følgende almindelige problemer:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | No power supply; Remote control batteries low; Circuit breaker tripped. | Kontroller strømforbindelsen; Udskift fjernbetjeningens batterier; Nulstil afbryderen. |
| Utilstrækkelig køling | Dirty air filters; Doors/windows open; Temperature setting too high; Obstruction at air inlet/outlet. | Clean air filters; Close doors/windows; Lower temperature setting; Remove obstructions. |
| Usædvanlig støj | Loose parts; Unit not level; Debris in outdoor unit. | Check for loose components; Ensure unit is level; Clear debris from outdoor unit. If noise persists, contact service. |
| Vandlækage fra indendørsenhed | Tilstoppet afløbsslange; Forkert installation. | Check and clear drainage hose; Contact installer for inspection. |
| Fjernbetjening virker ikke | Batterier døde eller forkert isat; Blokering mellem fjernbetjening og enhed. | Replace batteries; Ensure clear line of sight to indoor unit receiver. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte autoriseret servicepersonale.
Specifikationer
| Specifikation | Detalje |
|---|---|
| Mærke | Mirage |
| Model | SETCLF121T |
| Formfaktor | Mini split |
| Kapacitet | 1 ton |
| Kølekraft | 12000 britiske termiske enheder (BTU) |
| Voltage | 230 volt |
| Støjniveau | 41 dB |
| Indendørsenheds dimensioner (L x B x H) | 80.2 x 20 x 29.5 cm |
| Vægt (indendørsenhed) | 9 kilo |
| Sæsonbestemt energieffektivitetsforhold (SEER) | 12 |
| BEE-vurdering | 5 Stjerne |
| Speciel funktion | Cooling Function Only (as per product title) |
Garanti og support
Your Mirage SETCLF121T Mini Split Air Conditioner comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
For technical support, service requests, or inquiries regarding your product, please contact Mirage customer service through their official website or the contact information provided in your warranty documentation. Ensure to have your model number (SETCLF121T) and purchase date available when contacting support.





