Capresso Infinity Plus Conical Burr Grinder

1. Introduktion

The Capresso Infinity Plus Conical Burr Grinder is designed to provide a precise and consistent grind for various brewing methods. Grinding fresh whole beans immediately before brewing is essential for achieving optimal coffee flavor and aroma. This manual provides detailed instructions for the safe and effective use, maintenance, and troubleshooting of your grinder.

The Infinity Plus model features commercial-grade, solid steel conical burrs and an innovative gear reduction motor to minimize friction and heat, preserving the coffee's delicate flavors. It offers 16 fineness settings, from extra fine for Turkish coffee to very coarse for percolators and cold brew.

2. Vigtige sikkerhedsforanstaltninger

• Læs alle instruktioner, inden du betjener apparatet.
• To protect against electrical hazards, do not immerse the power cord, plug, or the appliance body in water or other liquids.
• Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af ​​børn.
• Træk stikket ud af stikkontakten, når det ikke er i brug, før du samler eller adskiller dele og før rengøring.
• Undgå kontakt med bevægelige dele.
• Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
• Må ikke bruges udendørs.
• Lad ikke ledningen hænge ud over kanten af ​​bordet eller bordpladen eller røre ved varme overflader.
• Brug ikke apparatet til andet end tilsigtet brug.

3. Identifikation af dele

Familiarize yourself with the components of your Capresso Infinity Plus grinder:

1. Bean Hopper with Lid: Holds whole coffee beans.
2. Upper Conical Burr: Removable for cleaning.
3. Grind Selector Dial: Adjusts grind fineness (16 settings).
4. Timer Dial: Sets grinding duration.
5. Ground Coffee Container: Collects ground coffee.
6. Lower Conical Burr: Fixed component.
7. Main Unit Base: Houses the motor and controls.
8. Power Cord: Connects to electrical outlet.

Figur 1: Overview of the Capresso Infinity Plus Conical Burr Grinder in White.

Figur 2: Nærbillede view of the grind selector dial, showing various fineness settings.

Figure 3: Illustration of removing the upper conical burr for cleaning.

4. Opsætning

1. Pakker ud: Fjern forsigtigt alle komponenter fra emballagen.
2. Ren: Wash the bean hopper, bean hopper lid, and ground coffee container with mild soap and water. Ensure all parts are completely dry before assembly.
3. Samle: Place the ground coffee container into its designated slot in the main unit. Ensure the upper conical burr is securely in place. Attach the bean hopper to the top of the unit and secure its lid.
4. Placering: Placer kværnen på en ren, tør og stabil overflade.
5. Magt: Sæt strømkablet i en passende stikkontakt (120 volt).

5. Betjeningsvejledning

1. Fyld bønnebeholderen: Open the bean hopper lid and pour whole coffee beans into the hopper. The hopper has an 11-ounce capacity. Replace the lid securely.
2. Select Grind Fineness: Rotate the grind selector dial to choose your desired fineness setting. Refer to the 'Grind Settings Guide' below for recommendations based on your brewing method.
3. Indstil slibetid: Rotate the timer dial to select the desired grinding duration. The grinder will automatically stop once the set time has elapsed.
4. Start slibning: Press the power button to begin grinding. The grinder will operate until the timer runs out or until you press the power button again to stop it manually.
5. Saml formalet kaffe: Once grinding is complete, carefully remove the ground coffee container from the unit.
6. Pulsslibning: For additional control, you can use the pulse grinding feature by repeatedly pressing and releasintænd/sluk-knappen.

6. Guide til indstillinger af kværn

The Capresso Infinity Plus offers 16 grind settings. Use the table below as a general guide for various brewing methods:

Figure 4: Recommended grind settings for various coffee brewing methods.

7. Vedligeholdelse og rengøring

Regelmæssig rengøring sikrer optimal ydeevne og forlænger levetiden på din kværn.

1. Tag stikket ud: Tag altid kværnen ud af stikkontakten inden rengøring.
2. Fjern bønnebeholder: Remove the bean hopper and empty any remaining whole beans.
3. Fjern øvre grat: Twist and lift the upper conical burr out of the unit (refer to Figure 3).
4. Rengør kværne: Use a brush (not included) to clean both the upper and lower conical burrs. Remove any trapped coffee particles.
5. Ren beholder til formalet kaffe: Empty and wash the ground coffee container and its lid with warm, soapy water. Rinse thoroughly and dry completely.
6. Rent ydre: Tør ydersiden af ​​kværnen af ​​med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke hovedenheden i vand.
7. Saml igen: Once all parts are dry, reassemble the grinder by placing the upper burr back into position, followed by the bean hopper and its lid. Insert the clean ground coffee container.

The innovative gear reduction motor and anti-static design help minimize static cling of coffee grounds, making cleanup easier.

8. Fejlfinding

• Kværnen starter ikke:
  • Sørg for, at netledningen er sat ordentligt i en fungerende stikkontakt.
  • Check that the bean hopper and ground coffee container are correctly assembled and locked into place.
  • Verify the timer dial is set to a desired grinding duration.
• Inkonsekvent slibning:
  • Ensure the burrs are clean and free of obstructions.
  • Adjust the grind selector dial to a different setting and test.
• Grinder is clogged:
  • Unplug the unit. Remove the bean hopper and upper burr. Carefully clear any blockages from the burrs and the grinding chamber using a brush.
• Overdreven statisk elektricitet vedhæftning af jord:
  • The Infinity Plus features anti-static technology. If static persists, ensure the ground coffee container is completely dry before use.

9. Specifikationer

• Mærke: Capresso
• Model: 570.02
• Farve: Hvid
• Dimensioner: 5 x 7.75 x 11.25 tommer
• Varens vægt: 4 pund
• Voltage: 120 volt
• Bønnebeholderens kapacitet: 11 ounce
• Kapacitet beholder til formalet kaffe: Up to 4 ounces
• Slibeindstillinger: 16 (Ekstra fin til grov)
• Burr Type: Commercial-grade solid steel conical burrs
• Særlige funktioner: Innovative gear reduction motor, safety lock, auto-off, removable upper burr, pulse grinding.

10. Garanti og support

For warranty information, product registration, or technical support, please refer to the official Capresso webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.