FLEXISPOT E6 Essential (ET365) Electric Standing Desk User Manual

1. Introduktion

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. Sikkerhedsoplysninger

• Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
• Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
• Hold børn og kæledyr væk fra skrivebordet under drift.
• Undgå at placere væsker direkte på kontrolpanelet eller i nærheden af ​​elektriske komponenter.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.
• Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.

3. Pakkens indhold

Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.

Inkluderede komponenter:

• Desktop (One-Piece Maple Top, 48"x30")
• Desk Frame (White)
• Dual Motor Lift System
• Kontrolpanel med hukommelsesforudindstillinger
• Assembly Hardware (screws, wrenches, cable clips)
• Strømadapter og kabler
• Instruktionsmanual

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.

4. Opsætning og montering

Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.

4.1 Udpakning og klargøring

1. Carefully open both boxes and remove all components.
2. Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
3. Kontroller alle dele i forhold til pakkens indholdsliste.

4.2 Rammesamling

1. Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
2. Connect the feet to the bottom of the lifting columns.
3. Adjust the frame width to match your 48"x30" desktop.

Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.

4.3 Desktop Attachment

1. Center the assembled frame onto the underside of the desktop.
2. Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
3. Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.

Billede: Nærbillede view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.

4.4 Kabelstyring

1. Connect the dual motors, control panel, and power adapter according to the labels.
2. Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
3. Ensure cables have enough slack to accommodate full height adjustment without tension.

Billede: Underside view of the FLEXISPOT E6 desk showing organized cables within the cable management system.

5. Betjeningsvejledning

5.1 Højdejustering

• Brug Op (▲) og Ned (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
• The desk features a 3-stage lift system, allowing height adjustments from 23.6" to 48.8".

5.2 Hukommelsesforudindstillinger

• The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
• Sådan gemmer du en højde: Juster skrivebordet til den ønskede højde, og tryk derefter på M button followed by one of the number buttons (1-4). The display will confirm the setting.
• To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.

5.3 Antikollisionssystem

• The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
• Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.

6. Nøglefunktioner

• Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ampplads til flere skærme og tilbehør.
• 3-Stage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
• Høj lasteevne: Supports up to 220 lbs (100 kg), accommodating various office equipment.
• Programmerbart kontrolpanel: Features an LED display and four memory presets for quick height adjustments.
• Robust konstruktion: Built with a strong steel structure for enhanced stability and durability.
• FSC-Certified Desktop: Tabletop made from responsibly sourced wood.

Billede: Detaljeret view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.

7. Vedligeholdelse

• Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de er stramme.
• Clean the desktop surface with a soft, damp klæde. Undgå skrappe kemikalier.
• Keep the electrical components dry and free from dust.
• Efterse kablerne med jævne mellemrum for tegn på slid eller beskadigelse.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:

• 5-årig dækning: Desk frame and motor.
• 2-årig dækning: Control panel and electronics.

For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official webwebstedet eller forhandleren, hvor produktet blev købt.