Triangle Borea BRA1-3D Hjemmebiografhøjttalere Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Triangle Borea BRA1-3D Home Cinema Speakers. These speakers are designed to enhance your home theater experience by providing versatile sound effects, compatible with Atmos, DTS:X, and Auro 3D audio formats.

The Borea BRA1-3D speakers can function as either vertical 3D effect speakers or horizontal effect speakers, offering flexibility in configuring your audio system from a 3.1.2 up to a 9.2.4 setup.

2. Produktet er slutview

2.1. Pakkens indhold

Sørg for at alle varer er til stede i pakken:

• 2 x Triangle Borea BRA1-3D Speakers

2.2. Nøglefunktioner

• Justerbar crossover: Allows for optimization between vertical 3D and horizontal effect modes.
• EFS Fabric Dome Tweeter: Delivers clear and precise high-frequency sound.
• Natural Cellulose Paper Membrane Driver (16 cm): Provides open and expansive mid-range and bass.
• Angled Front Design: Ensures precise targeting of sound waves towards the listener.
• Alsidig placering: Designed for placement atop main speakers for upward-firing effects or wall-mounted for surround effects.

Figur 1: Forside view of the Triangle Borea BRA1-3D speaker, showcasing the tweeter and main driver without the protective grille.

Figur 2: Forside view of the Triangle Borea BRA1-3D speaker with its protective grille installed, providing a sleek appearance.

3. Opsætning

3.1. Højttalerplacering

The Borea BRA1-3D speakers offer flexible placement options to optimize your home theater sound:

• Vertical 3D Effects (Atmos/DTS:X/Auro 3D): Place the BRA1-3D speakers directly on top of your main front or surround speakers. Ensure the angled front is facing upwards towards the ceiling. This configuration utilizes sound wave reflection to create an immersive overhead sound experience.
• Horizontal Effect Speakers (Surround): For traditional surround sound, the BRA1-3D speakers can be mounted on the back or side walls. Utilize the integrated mounting system for secure installation. Position them at ear level or slightly above for optimal sound dispersion.

The angled front design is crucial for directing sound waves precisely, whether upwards for 3D effects or directly towards the listening area for surround sound.

3.2. Forbindelser

Connect the BRA1-3D speakers to your amplifier or AV receiver using high-quality speaker cables. Observe correct polarity (positive to positive, negative to negative) to ensure proper phase and sound reproduction.

• The speakers have a nominal impedance of 8 Ohms (minimum 4.5 Ohms), making them compatible with a wide range of amplivførere.
• Sørg for din amplifier can safely drive speakers with this impedance rating.

Figur 3: Bagside view of the Triangle Borea BRA1-3D speaker, showing the speaker terminals for connection to an amplivligere.

4. Betjeningsvejledning

4.1. Justering af delefilter

The Borea BRA1-3D speakers feature an adjustable crossover. This allows you to optimize their performance based on their placement and intended use:

• Upward-Firing (Vertical 3D): Select the appropriate crossover setting for upward-firing operation. This setting is designed to complement the reflection of sound off the ceiling for immersive 3D audio.
• Direct-Firing (Horizontal Surround): Select the appropriate crossover setting for direct-firing operation when used as traditional surround speakers. This setting optimizes the sound for direct listening.

Refer to your AV receiver's setup menu for speaker configuration and calibration. It is recommended to run an automatic room correction system (if available) after speaker placement and connection to fine-tune the sound.

4.2. Systemkonfiguration

These speakers are designed to integrate into various home theater configurations, from a basic 3.1.2 system to an advanced 9.2.4 setup. The specific configuration will depend on your AV receiver's capabilities and the number of speakers in your system.

• A 3.1.2 system includes three front channels (left, center, right), one subwoofer, and two overhead/height channels (provided by the BRA1-3D speakers).
• A 9.2.4 system would involve nine main channels, two subwoofers, and four overhead/height channels.

Consult your AV receiver's manual for detailed instructions on configuring your specific surround sound setup.

5. Vedligeholdelse

For at sikre dine højttaleres levetid og optimale ydeevne skal du følge disse retningslinjer for vedligeholdelse:

• Rensning: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish.
• Gitre: Højttalergitterne kan forsigtigt fjernes for rengøring. Brug en blød børste eller støvsuger med børstetilbehør til at fjerne støv.
• Placering: Undgå at placere højttalere i direkte sollys, i nærheden af ​​varmekilder eller i områder med høj luftfugtighed.
• Håndtering: When moving speakers, always lift them carefully and avoid dropping them.

6. Fejlfinding

Hvis du støder på problemer med dine højttalere, kan du se følgende almindelige fejlfindingstrin:

• Ingen lyd:
  • Check all cable connections between the speakers and the ampSørg for, at de er fastgjort og korrekt polariseret.
  • Bekræft ampHvis højttaleren/modtageren er tændt, og den korrekte inputkilde er valgt.
  • Confirm the volume is not muted or set too low.
• Forvrænget lyd:
  • Reducer lydstyrken på din amplifier/modtager.
  • Kontroller højttalerledningernes forbindelser for løse tråde eller kortslutninger.
  • Sørg for amplifier is not overdriven or clipping.
• Ubalanceret lyd:
  • Tjek balanceindstillingerne på din amplifier/modtager.
  • Sørg for, at begge højttalere er tilsluttet med korrekt polaritet.
  • Verify speaker placement is symmetrical relative to the listening position.

If problems persist, consult your amplifier/receiver manual or contact Triangle customer support.

7. Specifikationer

8. Garanti og support

8.1. Garantioplysninger

The Triangle Borea BRA1-3D speakers come with a Begrænset garanti. Please refer to the warranty card included with your product or visit the official Triangle webwebstedet for detaljerede vilkår og betingelser vedrørende dækning, varighed og kravprocedurer.

8.2. Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Triangle customer support. Contact information can typically be found on the manufacturer's webwebstedet eller på produktemballagen.

You can visit the official Triangle store on Amazon for more information: Triangle Store