Clear Power Outdoor Digital Programmable Timer Instruction Manual

Indledning

Thank you for choosing the Clear Power Outdoor Digital Programmable Timer. This manual provides detailed instructions for the safe and efficient operation of your new timer. Designed for outdoor use, this digital timer offers convenient control over your outdoor lighting and electrical devices, featuring two grounded outlets and a user-friendly interface.

Vigtige sikkerhedsoplysninger

ADVARSEL: For at mindske risikoen for elektrisk stød, brand eller personskade skal du altid følge grundlæggende sikkerhedsforanstaltninger, når du bruger elektriske produkter.

Kun til udendørs brug.
Må ikke nedsænkes i vand.
Always ensure the timer is securely mounted vertically and not laid on the ground.
Works with Incandescent, Compact Fluorescent, and LED light sources.
Ensure the connected devices do not exceed the timer's maximum electrical rating.
Hold børn væk fra timeren og tilsluttede enheder.

For more detailed safety guidelines, please refer to the official Sikkerhedsoplysninger i PDF-format.

Nøglefunktioner

2 jordforbundne stikkontakter: Allows control of two devices simultaneously.
24-Hour Repeating Cycle: Programs turn on/off at the same time daily.
Simple Digital Programming: Easy to set with only three buttons.
Random Vacation Mode: Turns devices on/off +/- 30 minutes from programmed times for a "lived-in" appearance.
Manuel tilsidesættelseskontakt: Enables bypassing the timer to manually control connected items.
Vejrbestandigt design: Safe for year-round outdoor use in various weather conditions.
Flat Grounded Plug: Patented reversed ground pin enables use with right angle & lo-profile stikpropper.

Clear Power Outdoor Digital Programmable Timer showing ETL certification and key features — Figure 1: ETL Certified Timer highlighting 2 grounded outlets, 24-hour repeat, digital display, and rugged design.

Pakkens indhold

1 x Clear Power Outdoor Digital Programmable Timer (Model: DCOT-0004-DC)
1 x Brugsanvisning (dette dokument)

Opsætningsinstruktioner

Indledende opkrævning: To fully charge the internal battery and ensure proper operation, plug the timer into a standard 120V AC outlet for at least 30 minutes before first use or after prolonged storage.
Nulstilling af timeren: Before programming, it is recommended to reset the timer. Use a small pointed object (like a pen tip) to press the recessed "RESET" button located on the timer's face. The display will clear.
Montering: Install the timer vertically close to an outdoor-rated grounded receptacle. Use the integrated eye-hole on the cord to secure the timer to a wall or suitable surface with a screw. Do not lay the timer on the ground.

Clear Power Outdoor Digital Programmable Timer mounted vertically on a wall with a screw — Figure 2: Proper vertical installation of the timer using the eye-hole for secure mounting. Avoid laying the timer on the ground.

Clear Power Outdoor Digital Programmable Timer showing the flat grounded plug and two outlets — Figure 3: The patented reversed ground pin on the flat grounded plug allows for versatile use with various outlet types.

Betjeningsvejledning

Programming the Timer (Easy 3-Step Process)

The Clear Power Digital Timer is designed for simple programming with only three main buttons: DELAY START, ON/OFF, and RUN TIME.

Step 1: Turn Timer ON. Tryk på ON/OFF button to activate the timer. The display will show "TIMER ON".
Step 2: Set Delay Start Time. Tryk og hold på FORSINKET START button to quickly advance the time in hours. Lightly touch and release the button to move the time in 1-minute intervals. This sets how many hours and minutes from the current moment the timer will turn ON. For example, if the current time is 1:00 PM and you want the timer to turn ON at 6:00 PM, set DELAY START for 5:00 (5 hours).
Step 3: Set Run Time. Tryk og hold på KØR TID button to quickly advance the time in hours. Lightly touch and release the button to move the time in 1-minute intervals. This sets how long the timer will remain ON after it activates. For example, if the timer turns ON at 6:00 PM and you want it to turn OFF at 10:30 PM, set RUN TIME for 4:30 (4 hours and 30 minutes).

Clear Power Outdoor Digital Programmable Timer showing the 3-step programming process — Figure 4: Visual guide to the easy 3-step programming process for the timer.

Gentag funktion

To have the timer turn ON/OFF at the same programmed times every day, press the GENTAGE button. The display will show "REPEAT ON". This is ideal for daily routines like garden lights or holiday decorations.

Random Mode (Vacation Mode)

For a more "lived-in" appearance when you are away, use the TILFÆLDIG mode. Tryk på TILFÆLDIG button. The display will show "RANDOM ON". In this mode, the timer will randomly turn ON/OFF up to +/- 30 minutes from your programmed DELAY START and RUN TIME settings. For example, if DELAY START is 6:00 PM, it might turn on as early as 5:30 PM or as late as 6:30 PM. Similarly, the RUN TIME will randomly vary by up to 30 minutes.

Manuel tilsidesættelse

To bypass the timer's program and manually control the attached device, press the ON/OFF button again. The timer will hold its program until you change it. To return control of the device to the timer, press the ON/OFF knappen igen.

Video Guide: Programming and Features

Video 1: Official Clear Power guide demonstrating how to program and use the Outdoor EZ Digital Programmable Timer, including setting delay start, run time, repeat, and random modes. This video provides a visual walkthrough of the timer's features and operation.

Opretholdelse

Rensning: Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
Opbevaring: Når timeren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
Inspektion: Periodically inspect the timer and its cord for any signs of damage, such as cuts, fraying, or exposed wires. If damage is found, discontinue use immediately and replace the unit.

Fejlfinding

Problem	Mulig årsag	Løsning
Timerdisplayet er tomt eller svagt.	Det interne batteri er lavt eller afladet.	Sæt timeren i en stikkontakt i mindst 30 minutter for at oplade batteriet.
Timeren tænder/slukker ikke på programmerede tidspunkter.	Incorrect programming; Timer is in manual override mode; Power outage.	Review programming steps carefully. Ensure the timer is not in manual override (press ON/OFF button). If there was a power outage, the internal battery should maintain the program, but verify settings.
Den tilsluttede enhed tænder ikke.	Device is not properly plugged in; Device is faulty; Timer is not receiving power.	Ensure the device is securely plugged into the timer. Test the device in another outlet. Check the power outlet the timer is plugged into.
Random mode not working as expected.	Misunderstanding of random mode function.	Random mode varies ON/OFF times by +/- 30 minutes from programmed settings, it does not completely randomize. This is normal operation.

Specifikationer

Model: DCOT-0004-DC
Mærke: Klar strøm
Produktdimensioner: 1" D x 2" B x 3" H
Antal udsalgssteder: 2 Jordet
Skærmstørrelse: 6 Inches (display area)
Farve: Sort
Fabrikant: Klar strøm
Første tilgængelige: 17. juni 2020

Garanti og support

Clear Power products are designed for reliability and performance. For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Clear Power website. You can also contact the seller, DATACONCT SOLUTIONS INC, for assistance.

For additional resources, you may find the Brugervejledning (PDF) nyttig.

	EZ Digital Timer Programmeringsvejledning: Opsætning, betjening og fejlfinding Omfattende programmeringsvejledning til EZ Digital Timer (modeller DCIT-0002-DC, DCOT-0004-DC). Lær, hvordan du indstiller forsinket start, køretider, gentagelsestilstande og fejlfinder almindelige problemer til indendørs og udendørs brug.
	Clear Power Mechanical Timer: Brugsanvisning, opsætning og sikkerhedsvejledning (CP50001-CP50007) Detaljerede betjeningsvejledninger og sikkerhedsoplysninger til mekaniske Clear Power-timere (modellerne CP50001, CP50003, CP50005, CP50007). Lær, hvordan du indstiller timere, installerer indendørs- og udendørsenheder, og forstår elektriske klassificeringer og sikkerhedsforanstaltninger.
	DC-programmerbar cyklustimer: Brugsanvisning og specifikationer Omfattende guide til den programmerbare DC-cyklustimer, der beskriver dens tekniske parametre, knapfunktioner og trinvis betjening af indstilling af tænd- og slukkecyklusser.
	Dewenwils strømbesparende strimmeltimer HPST16M brugsanvisning Brugermanual til Dewenwils strømbesparende timer, model HPST16M. Lær om produktfunktioner, installation, betjening og specifikationer for denne 24-timers programmerbare timer.

Clear Power DCOT-0004-DC

Clear Power Outdoor Digital Programmable Timer