Indledning
Thank you for choosing the Allsmartlife LED Flush Mount Ceiling Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.
This 12-inch, 24W LED fixture delivers 2880 lumens and offers adjustable color temperatures (3000K, 4000K, 6500K) and dimming capabilities (10%-100%). Its ultra-slim design and energy efficiency make it an ideal lighting solution for various indoor spaces.
Sikkerhedsoplysninger
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Use only with 120 Volts, 60 Hz circuits.
- Do not attempt to alter the fixture. Any alteration will void the warranty.
- Sørg for, at alle elektriske forbindelser er sikre og overholder lokale forskrifter og bestemmelser.
- Do not install near heat sources or in areas with excessive moisture. This fixture is rated for damp steder.
- Brug sikkerhedsbriller og handsker under installationen.
Hvad er der i æsken
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- LED-loftsarmatur
- Monteringsbase
- Screw Accessories (Screws x4, Anchors x4, Wire Nuts x3)
- Instruktionsmanual
Figur 1: Medfølgende komponenter til installation.
Opsætning og installation
Følg disse trin for en sikker og korrekt installation:
- Sluk for strømmen: Before starting, ensure the power to the light fixture is turned off at the circuit breaker.
- Remove Mounting Base: Rotate and remove the mounting base from the back of the LED ceiling light fixture.
Figure 2: Detaching the mounting base.
- Secure Mounting Base: Secure the mounting base to the ceiling junction box using the provided screws and anchors. Ensure it is firmly attached.
Figure 3: Attaching the base to the ceiling.
- Tilslut ledninger: Connect the AC cables from the ceiling to the fixture's wires using the provided wire nuts. Match black to black, white to white, and ground to ground. Ensure connections are tight.
Video: Demonstrates the wiring connection process. Ensure power is off before connecting wires.
- Fastgør lysarmatur: Align the light fixture with the secured mounting base and rotate it clockwise until it locks securely into place.
Figure 4: Securing the light fixture to the base.
- Adjust Color Temperature (Pre-installation): Before final installation, locate the small switch on the back of the fixture to select your desired color temperature (3000K, 4000K, or 6500K). This setting cannot be changed after the fixture is fully mounted.
Figure 5: Color temperature adjustment switch.
Betjeningsvejledning
Once installed, restore power to the fixture at the circuit breaker.
- Tænd/sluk: Brug din almindelige vægkontakt til at tænde eller slukke lysarmaturet.
- Dæmpning: This fixture is dimmable from 10% to 100% when connected to a compatible Triac dimmer switch. Ensure your dimmer switch is compatible for optimal performance.
Video: Demonstrates the dimming functionality of the light fixture.
- Farvetemperatur: The color temperature (3000K Warm White, 4000K Neutral White, or 6500K Daylight White) is set via a switch on the back of the fixture during installation. It cannot be changed during normal operation.
Opretholdelse
To ensure the longevity and optimal performance of your Allsmartlife LED Flush Mount Ceiling Light Fixture, follow these maintenance guidelines:
- Rensning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Udskiftning af pære: This fixture uses integrated LED lights and does not require bulb replacement. The LEDs have a lifespan of over 50,000 hours.
- Inspektion: Undersøg regelmæssigt armaturet for tegn på skader, løse forbindelser eller slid. Hvis der findes problemer, skal strømmen afbrydes og en kvalificeret elektriker kontaktes.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. |
|
|
| Lyset flimrer eller dæmpes uventet. |
|
|
| Lyset er ikke klart nok. |
|
|
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Allsmartlife |
| Modelnavn | Flush Mount Loftslampe |
| Varenummer | ASL-FMAW1220-WH |
| Dimensioner | 12 cm L x 12 cm B x 0.98 cm H |
| Wattage | 24W |
| Lysstyrke | 2880 lumen |
| Farvetemperatur (CCT) | 3000K / 4000K / 6500K (Adjustable) |
| Dæmpbar | Yes (10%-100% with compatible Triac dimmer) |
| Voltage | 120 volt |
| Materiale | Plast |
| Lyskildetype | LED (integreret) |
| Gennemsnitligt liv | 50,000 timer |
| Installationstype | Flush Mount/Surface Mount |
| Indendørs/Udendørs brug | Indendørs (Damp Bedømt) |
Garanti og support
The Allsmartlife LED Flush Mount Ceiling Light Fixture comes with a 3 års begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.
For warranty claims, technical support, or any questions regarding your product, please contact Allsmartlife customer service through the retailer where you purchased the product or visit the official Allsmartlife webwebsted.
Fabrikant: Allsmartlife
Kontaktoplysninger: Refer to your purchase documentation or the Allsmartlife brand store on Amazon for the most current support details. Visit Allsmartlife Store
