SCULPFUN S10 Lasergravør Brugsanvisning

1. Introduktion

The SCULPFUN S10 Laser Engraver is a high-performance laser cutting and engraving machine designed for precision work on various materials, including wood and metal. It features a 10W optical power laser, an industrial-grade X-axis linear slide rail, and an air assist nozzle for enhanced cutting and engraving capabilities.

Figure 1: The SCULPFUN S10 Laser Engraver with various engraved and cut samples, showcasindens alsidighed.

2. Sikkerhedsoplysninger

WARNING: Laser radiation can cause eye injury and skin burns. Always wear appropriate laser safety goggles and ensure the protective cover is installed during operation. Never look directly into the laser beam.

• Betjen ikke maskinen uden opsyn.
• Ensure proper ventilation in the work area to dissipate fumes.
• Keep children under 14 years old away from the product. Children over 14 require adult supervision.
• Undgå kraftige stød på maskinen.
• Do not use the laser directly on specular reflection objects, as this may cause injury or damage the laser.
• Always place an A4 steel pad or similar protective material under the workpiece to protect your table from laser damage.

Figure 2: The adjustable laser eye shield provides protection during operation. Always wear additional safety goggles.

3. Pakkens indhold

Bekræft at alle komponenter er til stede og ubeskadigede ved udpakning:

Figure 3: All components included in the SCULPFUN S10 package. Ensure all parts are accounted for before assembly.

• SCULPFUN S10 Laser Engraver Frame
• 10W lasermodul
• Air Assist Nozzle and Tube
• Strømadapter
• USB kabel
• Laser sikkerhedsbriller
• A4 Steel Pad
• Monteringsværktøj og skruer
• Sample Wood Pieces
• Brugervejledning (dette dokument)

4. Opsætning

Follow these steps to assemble and prepare your SCULPFUN S10 Laser Engraver for first use:

1. Rammeenhed: Assemble the aluminum frame components according to the included pictorial instructions. Ensure all screws are tightened securely.
2. Installation af lasermodul: Carefully attach the 10W laser module to the X-axis gantry. Connect the necessary cables.
3. Air Assist Setup: Connect the air assist tube to the laser module's nozzle. If using an external air compressor (sold separately), connect it to the air assist tube.
4. Strøm- og USB-forbindelse: Connect the power adapter to the machine and a power outlet. Connect the USB cable from the machine to your computer.
5. Software installation: Install compatible laser engraving software such as LaserGRBL (for Windows) or LightBurn (for Windows and MAC). Refer to the software's documentation for detailed installation and setup.
6. Fokusjustering: Adjust the laser focus according to the instructions in your software or the laser module's specific guide. Proper focus is crucial for optimal engraving and cutting results.

5. Betjening

Operating the SCULPFUN S10 involves preparing your design, setting parameters, and initiating the engraving or cutting process.

5.1. Materiale forberedelse

• Place the material securely on the working area. Use clampom nødvendigt for at forhindre bevægelse.
• Ensure the A4 steel pad is positioned underneath the material to protect the surface below.
• Kontroller, at laserfokus er korrekt indstillet til materialetykkelsen.

5.2. Softwaredrift

1. Open your chosen laser software (e.g., LightBurn, LaserGRBL).
2. Importer eller opret dit design.
3. Configure laser parameters (power, speed, passes) based on the material type and desired outcome. Refer to the software's material settings guide for recommended values.
4. Preview the job to ensure correct placement and scale.
5. Initiate the engraving/cutting process. Monitor the machine closely during operation.

Figure 4: Illustration of the 10W optical power laser with air assist, demonstrating its cutting capabilities on 3mm and 6mm plywood in a single pass. The air assist helps in achieving cleaner cuts by removing residue.

Figure 5: Comparison showing the cleaner cutting edge and lack of smoke stains achieved by the SCULPFUN S10 with air assist, compared to other lasers without it.

5.3. Key Features for Operation

• High Density 10W Laser Power: The S10's 10W laser provides strong cutting penetration and engraving capabilities, allowing it to cut high-density woods like MDF and walnut more easily.
• Industrial-grade Engraving Accuracy: Equipped with a high-precision anti-shake linear X-axis slide rail, the S10 minimizes wave line marks, resulting in more accurate engravings.
• Powerful High-Speed Air Assist: The advanced fluid mechanics design of the air assist nozzle can spray high-speed airflow up to 14.5m/s, significantly improving cutting efficiency and quality when connected to a compatible air compressor (30L/min 0.03Mpa recommended, purchased separately).

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din lasergravørs levetid og optimale ydeevne.

• Rengør laserlinsen: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam clarity and power.
• Smør bevægelige dele: Apply a small amount of lubricant to the linear slide rails and belts as recommended in the detailed product manual to ensure smooth movement.
• Tjek for løse forbindelser: Regularly inspect all electrical and mechanical connections to ensure they are secure.
• Ryd affald: Remove any accumulated dust, debris, or material scraps from the machine's working area and internal components.

7. Fejlfinding

Almindelige problemer og deres potentielle løsninger:

8. Specifikationer

9. Garanti og support

SCULPFUN provides a 12 måneders garanti for the S10 Laser Engraver. For any questions, technical assistance, or warranty claims, please contact SCULPFUN customer support directly. Refer to the contact information provided in your product packaging or on the official SCULPFUN webwebsted.

For detailed machine instructions and parameter settings, always refer to the comprehensive manual provided with your product.