WORKPRO Buffer Polisher Brugsanvisning

1. Introduktion

Thank you for choosing the WORKPRO 6-inch 1080W Dual Action Random Orbital Polisher. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new polisher. Please read this manual thoroughly before first use and keep it for future reference. This tool is designed for various polishing and waxing applications, including car detailing, floor polishing, and metal polishing.

2. Sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger elektriske apparater, for at mindske risikoen for brand, elektrisk stød og personskade.

• Brug passende personlige værnemidler, herunder sikkerhedsbriller og handsker.
• Sørg for, at arbejdsområdet er rent, godt oplyst og fri for forhindringer.
• Do not operate the polisher in damp eller våde forhold.
• Hold børn og omkringstående væk, mens du betjener værktøjet.
• Unplug the polisher from the power source before making any adjustments, changing accessories, or performing maintenance.
• Do not force the tool; use the correct speed and pressure for the application.
• Efterse netledningen for skader før hver brug.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.

• 1 × Polisher Machine
• 1 × Auxiliary Handle
• 1 × Backing Pad
• 1 × Woolen Buffer Pad
• 6 × Foam Pads (various types for different applications)
• 2 × Replaceable Carbon Brushes
• 1 × Hex Key
• 3 × Hex Head Bolts
• 1 × Towel

Figur 3.1: Inkluderede komponenter

4. Produktfunktioner

The WORKPRO Buffer Polisher is engineered for efficiency and user comfort.

• 6 Variable Speed Control: Adjust speeds from 1400-5000 RPM to match project requirements, allowing for precise control during waxing and polishing.
  

  Figure 4.1: Polisher Components Overview
• Højtydende motor: Udstyret med en 9 amp, 1080 watt motor and 15mm dual action orbital motion for powerful and efficient operation. Heat-resistant copper wire ensures longer working time.
  

  Figure 4.2: High-Performance Motor

• Ergonomisk design: Features a comfortable grip hood and an auxiliary handle for non-slip control. The switch-locking mechanism reduces hand fatigue during extended use.
  

  Figur 4.3: Ergonomisk design

• Dual Action Orbital Motion: Provides high security and allows for polishing without glare, ensuring a smooth and even finish.
  

  Figure 4.4: Dual Action Mechanism

5. Opsætning

1. Fastgør hjælpehåndtaget: Secure the auxiliary handle to the polisher using the provided hex head bolts and hex key. Ensure it is firmly tightened for safe operation.
2. Install the Backing Pad: Align the backing pad with the spindle on the polisher and screw it on securely.
3. Attach Polishing Pads: The foam pads and woolen buffer pad attach to the backing pad via hook-and-loop fasteners. Select the appropriate pad for your task (e.g., foam pads for compounding/polishing, woolen pad for buffing).

Figure 5.1: Polisher Setup

6. Betjeningsvejledning

This section details the proper use of your WORKPRO Buffer Polisher for various applications.

1. Tænd/sluk: Plug the polisher into a suitable power outlet. Press the On/Off trigger to start the tool.
2. Using the Switch Locking Mechanism: For continuous operation, press the lock button located near the trigger after starting the polisher. This will keep the tool running without needing to hold the trigger. Press the trigger again to release the lock and stop the tool.
   

   Figure 6.1: Trigger and Lock Button

3. Justering af hastighed: Use the 6-variable speed adjustor dial to select the desired RPM (1400-5000 RPM). Lower speeds are generally used for waxing and spreading compounds, while higher speeds are for polishing and buffing.
   

   Figure 6.2: Speed Adjustor Dial
4. Påføringsmetoder: The polisher can be used with either the auxiliary handle for two-handed control or by gripping the main body for single-handed operation, depending on the task and user preference.
   

   Figur 6.3: Flere kontrolmetoder

5. Generel brug: Apply a small amount of compound or wax directly to the pad or the surface. Start the polisher at a low speed to spread the product, then increase speed as needed for polishing or buffing. Maintain even pressure and move the polisher in overlapping passes.
   

   Figur 6.4: Bredt udvalg af anvendelser

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din polermaskines levetid og optimale ydeevne.

• Rensning: After each use, wipe down the polisher with a clean, dry cloth. Remove any residue from the backing pad and ensure ventilation slots are clear.
  

  Figure 7.1: Ventilation Slots
• Udskiftning af kulbørste: The carbon brushes are wear items and will need periodic replacement. When the tool's performance decreases or it stops working, check the carbon brushes. To replace, unscrew the carbon brush covers on the side of the motor housing, remove the old brushes, and insert new ones. Ensure the brushes are seated correctly before replacing the covers.
  

  Figure 7.2: Carbon Brush Replacement

• Pudepleje: Clean polishing pads thoroughly after each use to remove product residue. This prolongs their life and maintains polishing effectiveness.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

WORKPRO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official WORKPRO webwebsted.

For technical support, replacement parts, or any inquiries regarding your WORKPRO Buffer Polisher, please contact WORKPRO customer service. Contact information can typically be found on the product packaging or the official WORKPRO webwebsted.

You can also visit the WORKPRO Store on Amazon for more information and products: WORKPRO Amazon Store.