Indledning
This user manual provides essential information for the installation, operation, and maintenance of your TELEVES NanoKom Mast Amplifier (Ref. 561621) and PicoKom Power Supply (Ref. 5796) kit. This kit is designed to enhance television signal reception, ensuring optimal performance for your home entertainment system. Please read this manual thoroughly before installation and operation to ensure safe and correct usage.
Sikkerhedsoplysninger
- Afbryd altid strømmen, før du foretager tilslutninger eller afbrydelser.
- Sørg for korrekt jording for at forhindre elektriske farer.
- Do not expose the devices to moisture or extreme temperatures.
- Only use the provided PicoKom power supply with the NanoKom amplivligere.
- Installation should be performed by qualified personnel if you are unsure about any steps.
Komponenter inkluderet
The TELEVES NanoKom Mast Amplifier and PicoKom Power Supply Kit typically includes:
- 1 x TELEVES NanoKom Mast Amplifier (Ref. 561621)
- 1 x TELEVES PicoKom Power Supply (Ref. 5796)
- Mounting accessories (screws, ties, etc.)
- Instruktionsmanual (dette dokument)
Opsætning og installation
Follow these steps for proper installation of the mast amplivligere og strømforsyning.
1. NanoKom Mast Amplifier Installation (Ref. 561621)
The NanoKom amplifier is designed for outdoor mast mounting. Ensure it is placed in a location that provides optimal signal reception and protection from direct weather exposure, although it is designed for outdoor use.
- Monter amplifier securely to the mast using the provided mounting hardware.
- Connect the antenna cables to the appropriate input ports on the amplivligere. Det amplifier features inputs for UHF, VHF, og SAT signals. Refer to the image below for port identification.
- Tilslut udgangskablet fra amplifier's UD port to the input of the PicoKom power supply.
- Ensure all F-connectors are tightened securely to prevent signal loss and moisture ingress.
Figur 1: TELEVES NanoKom Mast Amplifier (left) and PicoKom Power Supply (right). The amplifier shows inputs for UHF, VHF, and SAT, along with an OUT port for connection to the power supply. It also features a DC UHF switch (OFF/ON) and indicates 12-24V power requirement. The power supply unit (Ref. 5796) has a Vdc input.
2. PicoKom Power Supply Connection (Ref. 5796)
The PicoKom power supply is designed for indoor use and provides the necessary power to the mast amplifier via the coaxial cable.
- Tilslut kablet fra amplifier's UD port to the input of the PicoKom power supply.
- Connect the output of the PicoKom power supply to your television or distribution system.
- Plug the PicoKom power supply into a standard electrical outlet.
- Bekræft DC UHF switch on the NanoKom amplifier is set correctly. If your UHF antenna requires DC power (e.g., for a pre-amplifier), set it to ON. Otherwise, set it to SLUKKET.
Betjeningsvejledning
Once installed and powered, the TELEVES NanoKom amplifier and PicoKom power supply operate automatically to amplify and distribute the television signal.
- Signal Ampliifikation: The NanoKom amplifier boosts weak UHF, VHF, and SAT signals received by your antenna, improving picture quality and channel availability.
- Strømforsyning til Amplivligere: The PicoKom power supply injects power (12-24Vdc) into the coaxial cable, which travels up to the mast amplivligere.
- DC UHF Switch: This switch on the amplifier controls the DC power supply to the UHF input. Ensure it is set according to your antenna's requirements.
Opretholdelse
The TELEVES NanoKom and PicoKom units are designed for low maintenance. However, periodic checks can ensure long-term performance.
- Rensning: Gently wipe the exterior of both units with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Kabelforbindelser: Periodically check all coaxial cable connections for tightness and signs of corrosion. Re-tighten if necessary.
- Miljøforhold: Ensure the outdoor amplifier is not obstructed by debris and that the indoor power supply is in a well-ventilated area, away from heat sources.
Fejlfinding
If you experience issues with signal reception, consider the following troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet signal eller dårlig signalkvalitet | Loose cable connections, incorrect DC UHF switch setting, power supply issue, antenna misalignment. |
|
| Amplifier not powering on | PicoKom power supply not working, cable fault. |
|
Specifikationer
Key technical specifications for the TELEVES NanoKom Mast Amplifier and PicoKom Power Supply Kit:
- Produktmodel: 438620
- NanoKom Mast Amplifier Reference: 561621
- PicoKom Power Supply Reference: 5796
- Input Frequencies: UHF, VHF, SAT
- Power Supply (PicoKom): 12-24Vdc (via coaxial cable)
- DC Pass (UHF): Selectable ON/OFF
- ASIN: B0B136T4QY
Garanti og support
Warranty information for the TELEVES NanoKom Mast Amplifier and PicoKom Power Supply Kit is typically provided at the time of purchase or can be found on the official TELEVES website. For technical support, product registration, or warranty claims, please refer to the contact information provided with your purchase or visit the official TELEVES support portal.
