Indledning
Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Billede: Forside view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.
Sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.
- Alle elektriske forbindelser skal være i overensstemmelse med lokale og National Electrical Code (NEC) standarder.
- Kontakt en kvalificeret elektriker, hvis du er usikker på ledningsføringsprocedurerne.
- Do not install near combustible materials or in areas with explosive atmospheres.
- Ensure the fixture is securely mounted to a structural surface.
- This fixture is rated for outdoor wet locations (IP65).
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- LED Outdoor Security Flood Light Fixture
- Monteringsudstyr (skruer, trådmøtrikker)
- Pakning
- Instruktionsmanual

Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | S9DFL/850/MOT/WH |
| Mærke | Feit Electric |
| Lysudgang | 2000 lumen |
| Farvetemperatur | 5000K dagslys |
| Wattage | 28 watt |
| Voltage | 120 volt |
| Bevægelsessensorvinkel | 180° |
| Bevægelsessensor rækkevidde | Op til 50 fod |
| Dusk-to-Dawn sensor | Integreret |
| Vejrbestandighed | IP65 vandtæthedsklassificeret |
| Materiale | Plastic, Polycarbonate Lens |
| Dimensioner (L x B x H) | 9 cm x 5.6 cm x 7.7 cm |
| Levetid | 50,000 timer |

Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.
Installationsvejledning
1. Forbered til installation
- Sluk for strømmen: Find afbryderen eller sikringsboksen, og sluk for strømmen til den samledåse, hvor armaturet skal installeres.
- Ryd området: Ensure the installation area is clear of obstructions and provides stable support for the fixture.
2. Montering af armaturet
The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
- Feed the electrical wires from the junction box through the center hole of the mounting plate.
- Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.

Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.
3. Ledningsforbindelser
Connect the fixture wires to the household wiring using the provided wire nuts:
- Tilslut sort ledningen fra armaturet til sort (spændingsførende) ledning fra samledåsen.
- Tilslut hvid ledningen fra armaturet til hvid (neutral) ledning fra samledåsen.
- Tilslut grøn (jord)ledning fra armaturet til grøn or bare copper (ground) wire from the junction box.
- Ensure all connections are secure and insulated with wire nuts.
4. Secure the Fixture
Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.

Billede: Side view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.
Betjeningsvejledning
1. Power On and Initial Test
After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.
2. Bevægelsessensorens funktionalitet
The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).

Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.
3. Dusk-to-Dawn Functionality
The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.

Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.
4. Adjusting Light Heads and Sensor
The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.
Opretholdelse
- Rensning: Sørg for, at strømmen er slukket, inden rengøring. Tør armaturet af med en blød klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de elektriske komponenter.
- Inspektion: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
- lysdioder: De integrerede LED'er er designet til lang levetid og kan ikke udskiftes af brugeren.

Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power, loose wiring, faulty sensor. | Check circuit breaker. Verify all wiring connections. Ensure sensor is not obstructed. |
| Lyset forbliver tændt konstant. | Constant motion detected, sensor sensitivity too high, dusk-to-dawn sensor malfunction. | Check for continuous motion in sensor's field of view. Adjust sensor sensitivity. Ensure no ambient light is interfering with the dusk-to-dawn sensor. |
| Lyset tændes i løbet af dagen. | Dusk-to-dawn sensor obstructed or malfunctioning. | Ensure the dusk-to-dawn sensor is not covered or in a shaded area that mimics nighttime conditions. |
| Bevægelsessensorens rækkevidde er dårlig. | Sensor obstructed, incorrect angle, environmental factors. | Clear obstructions. Adjust sensor angle. Avoid placing near heat sources or reflective surfaces. |
Garanti
This Feit Electric product is warranted to be free from defects in workmanship and materials for 5 år from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.
Støtte
For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric webhjemmeside for de seneste kontaktoplysninger.
Feit Electric Webwebsted: www.abey.com





