1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen EB2100 5-Series Electronic Bidet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image 1: Moen EB2100 Electronic Bidet Seat and Remote Control.
2. Vigtige sikkerhedsoplysninger
Observe all safety warnings and instructions to reduce the risk of fire, electric shock, or injury.
- Elektriske krav: An electrical power outlet is required for this bidet seat. It must be a standard grounded power outlet (120V AC on a minimum 10A circuit) located within 47 inches of the toilet seat. Ensure the outlet is properly grounded.
- Vandforsyning: Connect the bidet seat only to a potable cold water supply.
- Installation: Installation must comply with all local plumbing and electrical codes. If you are unsure about installation, consult a qualified professional.
- Rensning: Disconnect power before cleaning the unit. Do not immerse the unit in water.
- Børn: Hold øje med børn for at sikre, at de ikke leger med apparatet.
Image 2: Illustration of the required electrical outlet for the bidet seat.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Aflangt bidetsæde
- Fjernbetjening
- Two AAA Batteries (for remote)
- Fangstplade
- Skabelon
- Monteringsudstyr (skruer, skiver, møtrikker)
- T-ventil
- Vandtilførselsslange
- Installationsvejledning (dette dokument)
Image 3: Visual representation of included components and recommended tools.
4. Recommended Tools
Følgende værktøjer anbefales til installation:
- Skruenøgle
- Phillips-skruetrækker
- Målebånd
- Rubber Mallet (optional, for tight fits)
5. Installationsvejledning
The Moen EB2100 bidet seat is designed for retrofitting and replaces your existing toilet seat. It fits most elongated toilets in the United States.
5.1 Forinstallation
- Sluk for vandtilførselsventilen til toilettet.
- Skyl toilettet for at tømme tanken.
- Frakobl den eksisterende vandforsyningsslange fra toilettanken.
- Fjern det eksisterende toiletsæde ved at skrue monteringsboltene af.
5.2 Installing the T-Valve and Water Inlet Hose
- Install the T-Valve onto the fill valve of the toilet tank. Ensure the rubber washer is correctly seated to prevent leaks.
- Connect the toilet's original water supply hose to the bottom of the T-Valve.
- Connect one end of the provided water inlet hose to the side of the T-Valve.
5.3 Mounting the Bidet Seat
- Place the catch plate and template over the toilet bowl's mounting holes. Adjust for optimal positioning.
- Insert the mounting hardware through the catch plate and toilet holes. Tighten securely.
- Slide the bidet seat onto the catch plate until it clicks into place.
- Connect the other end of the water inlet hose to the bidet seat's water connection port.
- Turn on the water supply valve slowly and check for leaks.
5.4 Elektrisk tilslutning
- Plug the bidet seat's power cord into the grounded electrical outlet.
- Sørg for, at netledningen ikke er i klemme eller beskadiget.
Image 4: The Moen EB2100 bidet seat installed on an elongated toilet, showcasing its retrofittable design.
6. Betjeningsvejledning
The Moen EB2100 offers various features for a personalized experience, controlled via the remote control or the side panel.
6.1 Fjernbetjening
Insert the two AAA batteries into the remote control. The remote allows for convenient adjustment of all bidet functions.
6.2 Cleansing Functions
- Forvask: Activates the front nozzle for feminine cleansing.
- Bagvask: Activates the rear nozzle for posterior cleansing.
- Vandtryk: Adjust the water spray intensity using the remote control.
- Vandtemperatur: Select your preferred water temperature. The unit provides instantaneous heated water.
- Massage: Some models offer a pulsating spray for a massage effect.
Image 5: Close-up of the bidet nozzle in operation, demonstrating water spray for hygiene.
6.3 Komfortfunktioner
- Opvarmet sæde: The seat features a sensor and adjustable heating. Use the remote to set your desired seat temperature.
- Varmlufttørrer: After cleansing, activate the warm air dryer. Adjust the air temperature for comfort.
- Natlys: An integrated nightlight provides illumination for nighttime use.
- Lugtfjerner: The built-in deodorizer uses carbon-filtering technology to reduce odors.
Billede 6: Overview of the bidet seat's features, including soft-close lid, dual cleansing, light assistance, odor reducing, massage, warm air dryer, retrofittable design, and remote control.
7. Vedligeholdelse
7.1 Rengøring af bidetsædet
- Unplug the bidet seat from the electrical outlet.
- Tør de udvendige overflader af med en blød, damp klud og et mildt, ikke-slibende rengøringsmiddel.
- Brug ikke skrappe kemikalier, slibende rengøringsmidler eller skurebørster, da disse kan beskadige overfladen.
- Sørg for, at der ikke kommer vand ind i de elektriske komponenter.
7.2 Nozzle Cleaning and Replacement
The bidet features a self-cleaning, replaceable nozzle with silver nanotechnology for enhanced hygiene.
- The nozzle performs a self-cleaning cycle before and after each use.
- For manual cleaning, refer to the remote control instructions for activating the nozzle cleaning function.
- Replace the nozzle periodically as recommended by Moen for optimal hygiene and performance.
8. Fejlfinding
If you encounter issues with your Moen EB2100 bidet seat, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen vandspray | Water supply valve closed; hose kinked; filter clogged. | Open water supply valve; straighten hose; clean water filter. |
| No heated water | Power not connected; heater setting too low. | Ensure unit is plugged in; adjust water temperature setting on remote. |
| Fjernbetjening virker ikke | Batterier døde eller forkert isat; fjernbetjening uden for rækkevidde. | Replace batteries; ensure correct polarity; operate remote closer to the unit. |
| Seat not heating | Sædevarmefunktion deaktiveret; temperaturindstillingen er for lav. | Activate heated seat function; adjust seat temperature setting. |
| Lækager fra forbindelser | Connections not tight; damaged washers. | Spænd forbindelserne (overspænd dem ikke); udskift skiver, hvis de er beskadigede. |
If the problem persists after attempting these solutions, please contact Moen customer support.
9. Specifikationer
- Model: EB2100
- Type: Elektronisk bidetsæde
- Toiletkompatibilitet: Aflange toiletter
- Farve: Hvid
- Materiale: Plast
- Produktmål (L x B): 20.38 x 15.25 cm
- Varens vægt: 11.84 pund
- Magt: 120V AC, 10A minimum circuit (Grounded outlet required)
- Funktioner: Remote Control, Heated Seat, Warm Air Dryer, Front/Rear Wash, Adjustable Water Temperature/Pressure, Self-Cleaning Nozzle, Nightlight, Deodorizer.
Image 7: Detailed dimensions for the Moen EB2100 bidet seat and its remote control.
10. Garanti og support
10.1 Garantioplysninger
The Moen EB2100 Electronic Bidet Seat is covered by a Begrænset livstidsgaranti. Please refer to the warranty card included with your product or visit the official Moen website for full details regarding terms and conditions.
10.2 Kundesupport
For teknisk assistance, reservedele eller garantikrav, kontakt venligst Moens kundesupport. Kontaktoplysninger kan typisk findes på Moens hjemmeside. webwebstedet eller på produktemballagen.
Webwebsted: www.moen.com
