Pro-Ject E1 Turntable User Manual

1. Introduktion

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject E1 turntable. Please read these instructions carefully before using your device to ensure optimal performance and longevity.

2. Sikkerhedsinstruktioner

• Always handle the turntable with care. Avoid dropping or subjecting it to strong vibrations.
• Hold enheden væk fra vand, fugt og direkte sollys.
• Ensure the turntable is placed on a stable, level surface to prevent skipping and damage.
• Afbryd strømforsyningen før rengøring eller vedligeholdelse.
• Do not attempt to open the turntable casing or perform unauthorized repairs. Refer all servicing to qualified personnel.
• Brug kun den strømforsyning, der følger med enheden.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Pro-Ject E1 Pladespiller
• Universal Strømforsyning
• RCA-kabel
• Støvdæksel
• Filtmåtte

4. Opsætning

4.1 Udpakning og placering

Carefully remove all components from the packaging. Place the turntable on a firm, level surface, away from direct heat sources or strong vibrations. Ensure adequate ventilation around the unit.

Billede 1: The Pro-Ject E1 turntable in black, showcasing its sleek design and main components. This image provides an overview af den samlede enhed.

4.2 Montering

While the Pro-Ject E1 is designed for 'Plug & Play' convenience, some minor assembly is required. The tracking force and anti-skating are pre-adjusted at the factory. Follow these steps:

1. Installation af tallerken: Carefully place the main platter onto the spindle.
2. Montering af bælte: Gently stretch the drive belt around the motor pulley and the inner rim of the platter.
3. Felt Mat: Læg filtmåtten oven på fadet.
4. Støvdæksel: Attach the dust cover to the hinges at the rear of the plinth.

Billede 2: A diagram illustrating the key components of the Pro-Ject E1 turntable, including the aluminium tonearm, composite wood plinth, electronic speed switch, high-quality MM cartridge, and three feet. This helps in identifying parts during assembly.

4.3 Tilslutning til et lydsystem

Connect the supplied RCA cable from the turntable's output to the appropriate input on your amplifier eller modtager. Hvis din ampHvis højttaleren ikke har en dedikeret 'Phono'-indgang, skal du bruge en ekstern phono-forforstærker.amplivligere.

4.4 Strømtilslutning

Connect the universal power supply to the turntable's power input and then plug it into a suitable wall outlet.

5. Betjeningsvejledning

5.1 Tænd/sluk

The turntable is powered on when connected to the mains. There is no separate power switch. The motor starts when you select a speed.

5.2 hastighedsvalg

The Pro-Ject E1 features an electronic speed switch. Use the switch located on the plinth to select between 33 RPM and 45 RPM, depending on the record you are playing.

5.3 Afspilning af en plade

1. Læg en plade på fadet.
2. Select the correct playback speed (33 or 45 RPM) using the electronic speed switch.
3. Løft tonearmen ved hjælp af cue-håndtaget.
4. Carefully position the stylus over the desired starting groove of the record.
5. Lower the tonearm gently using the cueing lever. The stylus will descend onto the record, and playback will begin.

Billede 3: A hand carefully placing a vinyl record onto the platter of the Pro-Ject E1 turntable, demonstrating the initial step of playing music.

5.4 Stop afspilning

1. Løft tonearmen ved hjælp af cue-håndtaget.
2. Sæt tonearmen tilbage i dens hvileposition.
3. Fjern pladen fra pladen.
4. Close the dust cover to protect the turntable.

5.5 Dust Cover Usage

The acrylic dust cover protects your turntable from dust and debris. It can be opened and closed using the adjustable hinges. For optimal sound quality, it is recommended to play records with the dust cover open or removed.

6. Vedligeholdelse

6.1 Rengøring af drejeskiven

Regularly clean the turntable with a soft, dry, anti-static cloth. Avoid using cleaning sprays or solvents, as they may damage the finish. For the dust cover, use a soft, lint-free cloth and a mild acrylic cleaner if necessary.

6.2 Pleje af pennen

The stylus is a delicate component. Use a soft stylus brush to gently clean the stylus tip from back to front. Never use your fingers or harsh chemicals. A dirty or worn stylus can damage your records and degrade sound quality. Replace the stylus when it shows signs of wear.

Billede 4: Et nærbillede view of the Ortofon OM5e cartridge and stylus, highlighting the delicate nature of the component responsible for reading vinyl grooves. Proper care of this part is crucial for sound quality.

7. Fejlfinding

If you encounter issues with your Pro-Ject E1 turntable, consult the following common problems and solutions:

• Ingen strøm: Ensure the power supply is securely connected to both the turntable and the wall outlet.
• Ingen lyd: Check all RCA cable connections between the turntable and your amplifier. Verify that the correct input is selected on your amplifier and that the volume is turned up. Confirm that your amplifier has a phono input or that an external phono preamplivligere er i brug.
• Springning eller forvrængning: Ensure the turntable is on a stable, level surface. Check the stylus for dirt or damage. Verify that the record is clean and free of scratches.
• Forkert hastighed: Confirm that the electronic speed switch is set to the correct RPM (33 or 45) for the record being played.

If problems persist, please contact your authorized Pro-Ject dealer or customer support for assistance.

8. Specifikationer

9. Garanti og support

Your Pro-Ject E1 turntable is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webwebsted for kontaktoplysninger.