Indledning
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MX810de All-in-One Laser Printer Copier Machine. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
Produkt overview
Figure 1: Lexmark MX810de All-in-One Laser Printer Copier Machine. This image displays the multi-function device with its document feeder, control panel, and multiple paper trays.
1. Opsætning
1.1 Udpakning og placering
- Tag forsigtigt printeren ud af emballagen. Gem al emballage til senere transport.
- Place the printer on a sturdy, level surface with adequate ventilation. Ensure sufficient space around the device for proper operation and maintenance.
- Remove all protective tapes and packing materials from the exterior and interior of the printer. Refer to the quick setup guide for specific locations.
1.2 Tilslutning af strøm
- Connect the power cord to the printer's power inlet.
- Sæt den anden ende af netledningen i en jordet stikkontakt.
- Tryk på tænd/sluk-knappen for at tænde printeren.
1.3 Network and USB Connection
- Ethernet-forbindelse: Tilslut et Ethernet-kabel fra din netværksrouter, eller skift til printerens Ethernet-port.
- USB-forbindelse: Connect a USB cable from your computer to the printer's USB port.
- Install the necessary printer drivers on your computer. Drivers can typically be found on the Lexmark support webwebsted.
1.4 Ilægning af papir
- Open the desired paper tray.
- Juster papirstyrene, så de passer til papirstørrelsen.
- Load the paper stack into the tray, ensuring it is flat and below the maximum fill line.
- Luk papirbakken.
2. Betjening af printeren
2.1 Grundlæggende udskrivning
- Sørg for, at printeren er tændt og forbundet til din computer eller dit netværk.
- Åbn det dokument, du vil udskrive, på din computer.
- Vælge File > Udskriv (eller den tilsvarende kommando i din applikation).
- Choose the Lexmark MX810de from the list of available printers.
- Adjust print settings (e.g., number of copies, paper size, duplex printing) as needed.
- Klik Trykke.
2.2 Kopiering af dokumenter
- Place the document face-down on the scanner glass or face-up in the automatic document feeder (ADF).
- On the printer's touchscreen, select the Kopi fungere.
- Adjust copy settings such as number of copies, darkness, and paper source.
- Tryk på Starte knappen for at begynde kopieringen.
2.3 Scanning af dokumenter
- Placer dokumentet på scannerglaspladen eller i den automatiske dokumentføder.
- On the printer's touchscreen, select the Scan fungere.
- Choose your desired scan destination (e.g., computer, email, network folder).
- Adjust scan settings such as resolution and file format.
- Tryk på Starte knappen for at starte scanningen.
3. Vedligeholdelse
3.1 Rengøring af printeren
- Turn off the printer and unplug the power cord before cleaning.
- Tør printerens yderside af med en blød, tør klud.amp, fnugfri klud.
- Rengør scannerglasset med et glasrensemiddel påført en klud (ikke direkte på glasset).
- Regularly remove dust and debris from paper trays and the output bin.
3.2 Replacing Consumables (Toner/Imaging Unit)
- The printer will display a message when toner or the imaging unit needs replacement.
- Åbn printerens forreste adgangsdør.
- Carefully remove the old toner cartridge or imaging unit.
- Unpack the new consumable and gently shake the toner cartridge to distribute the toner.
- Insert the new consumable until it clicks into place.
- Luk den forreste adgangsdør.
3.3 Udredning af papirstop
- If a paper jam occurs, the printer's display will indicate the location of the jam.
- Open the indicated access covers or trays.
- Carefully pull the jammed paper in the direction of the paper path. Avoid tearing the paper.
- Sørg for at alle papirstykker er fjernet.
- Close all covers and trays. The printer should resume operation.
4. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Printeren tænder ikke | Netledning ikke tilsluttet; stikkontakt defekt | Sørg for, at netledningen er korrekt tilsluttet. Prøv en anden stikkontakt. |
| Papirstop | Incorrectly loaded paper; Debris in paper path | Refer to Section 3.3 for clearing paper jams. Ensure paper is loaded correctly. |
| Dårlig printkvalitet | Low toner; Dirty imaging unit; Incorrect print settings | Check toner level and replace if low. Perform a print quality calibration from the printer menu. Clean the imaging unit if necessary. |
| Printeren svarer ikke | Connectivity issue; Driver problem | Check USB or Ethernet cable connection. Restart the printer and computer. Reinstall printer drivers if needed. |
5. Specifikationer
- Modelnavn: MX810de
- Udskrivningsteknologi: Laser (monokrom)
- Funktioner: Print, Copy, Scan, Fax (P/S/C/F)
- Max Print Speed (Monochrome): 55 sider pr. minut (sider pr. minut)
- Maks. kopihastighed (sort/hvid): 55 ppm
- Udskriftsopløsning: 1200 x 1200 dpi
- Duplex udskrivning: Ja
- Standard hukommelse: 1 GB
- Forbindelse: Ethernet, USB
- Kontrolmetode: Touchskærm
- Maks. inputarkkapacitet: 1200 sheets (standard)
- Arkstørrelse: Op til 8.5 x 14 tommer
- Driftscyklus: Op til 300,000 sider om måneden
- Varens vægt: Cirka 311 pund
6. Garantioplysninger
This Lexmark MX810de unit comes with a 90 dages begrænset garanti. For specific terms and conditions regarding this renewed product, please refer to the documentation provided at the time of purchase or contact your vendor.
7. Kundesupport
For technical assistance, driver downloads, or further support, please visit the official Lexmark support website or contact your product vendor. Have your printer's model number (MX810de) and serial number ready when seeking support.
