Indledning
Welcome to your Nolan N-Com B902L R Series Bluetooth Communication System. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your device. Please read this manual carefully before using the product to ensure optimal performance and safety.
Vigtige sikkerhedsoplysninger
- Prioritér altid trafiksikkerhed. Betjen ikke enheden på en måde, der distraherer dig fra kørslen.
- Ensure the device is securely installed before riding.
- Forsøg ikke at adskille eller modificere enheden.
- Hold enheden væk fra ekstreme temperaturer og fugt.
- Brug kun godkendt opladningstilbehør.
Pakkens indhold
- Nolan N-Com B902L R Series Communication Unit
- Mikrofon
- Højttalere
- USB opladningskabel
- Monteringshardware
- Brugervejledning (dette dokument)
Produkt overview
The Nolan N-Com B902L R Series is designed for seamless communication while riding. It features an ergonomic 4-button keypad for intuitive control, even with gloves on.

Opsætning
1. Installation
Follow these steps to install the N-Com B902L R Series into your compatible Nolan helmet.
- Remove the helmet's inner padding as per your helmet's instructions.
- Position the main unit on the side of the helmet, ensuring the microphone and speaker cables can reach their respective positions.
- Secure the main unit using the provided mounting hardware.
- Install the speakers into the helmet's ear pockets.
- Attach the microphone to the helmet's chin bar or cheek pad, ensuring it is close to your mouth.
- Reinstall the helmet's inner padding.
2. Opladning af batteriet
Oplad enheden helt før første brug.
- Connect the USB charging cable to the charging port on the N-Com unit.
- Tilslut den anden ende af kablet til en USB-strømadapter (medfølger ikke) eller en USB-port på computeren.
- LED-indikatoren viser opladningsstatus (f.eks. rød for opladning, grøn for fuldt opladet).
- En fuld opladning tager typisk cirka 3 timer.
3. Parring med Bluetooth-enheder
The B902L R Series can be paired with smartphones, GPS devices, and other N-Com units.
- Power on the N-Com unit.
- Enter pairing mode by pressing and holding the M-knap indtil LED'en blinker blå og rød.
- On your smartphone or GPS device, enable Bluetooth and search for available devices.
- Select "N-Com B902L" from the list.
- Indtast PIN-koden "0000", hvis du bliver bedt om det.
- Once paired, the LED indicator will change to a slow blue flash.
Betjeningsvejledning
Tænd/sluk
For at tænde: Tryk og hold nede Power knap i 2 sekunder.
For at slukke: Tryk og hold nede Power knap i 3 sekunder.
Lydstyrkekontrol
Increase volume: Press the Volumen op-knap.
Decrease volume: Press the Volumen ned-knap.
Intercom funktioner
Pair with another N-Com unit: Follow pairing instructions in the Setup section.
Start intercom conversation: Press the Intercom knap.
End intercom conversation: Press the Intercom knap igen.
Telefonopkald
Answer call: Press the Telefon knap.
End call: Press the Telefon knap igen.
Reject call: Press and hold the Telefon knap i 2 sekunder.
Voice dial: Double-press the Telefon knap (if supported by your phone).
Musikafspilning
Afspil/pause: Tryk på Afspil/pause knap.
Next track: Double-press the Knappen Næste spor.
Previous track: Double-press the Forrige track-knap.
Nødstopsignal (ESS)
The B902L R Series features an Emergency Stop Signal (ESS) system. This system automatically activates a flashing LED light on the rear of the helmet during sudden braking, enhancing rider visibility.
Refer to the N-Com app or advanced settings for calibration and sensitivity adjustments.
Opretholdelse
Rensning
Brug en blød, damp cloth to clean the unit. Do not use abrasive cleaners or solvents.
Sørg for, at alle porte er tørre, før du oplader.
Opbevaring
Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
Ved langtidsopbevaring skal batteriet oplades til cirka 50% hver par måneder for at forlænge batterilevetiden.
Batteripleje
Undgå at aflade batteriet helt ofte.
Udsæt ikke batteriet for ekstreme temperaturer.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | Lavt batteri | Oplad enheden helt. |
| Kan ikke parres med telefonen | Device not in pairing mode; Bluetooth off on phone | Ensure N-Com is in pairing mode. Enable Bluetooth on phone. Try restarting both devices. |
| Ingen lyd fra højttalerne | Volume too low; Speakers not connected properly | Increase volume. Check speaker connections inside helmet. |
| Intercom not working | Units not paired; Out of range | Re-pair units. Ensure units are within effective range. |
Tekniske specifikationer
- Model Name: Nolan BNCOM52700040
- Item Model Number: BNCOM52700040
- Brand: Nolan
- Farve: Sort
- Item Weight: 100 Grams
- Produktmål: 15.49 x 15.24 x 5.08 cm
- Forbindelse: Bluetooth
- Keypad: Ergonomic 4-button keypad
- Special Features: Emergency Stop Signal (ESS)
Garanti og support
For warranty information, technical support, or service inquiries, please contact Nolan customer support through their official website or your local distributor. Keep your proof of purchase for warranty claims.





