Moen 218H0SRN

Moen Attune Handheld Shower Head Instruction Manual

Model: 218H0SRN

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Attune Handheld Shower Head. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

The Moen Attune Handheld Shower Head features a Spot Resist Brushed Nickel finish and offers 6 distinct spray settings for a customized showering experience. It is designed for ease of use and durability.

Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger under installation og brug:

  • Sørg for, at hovedvandforsyningen er slukket, før du påbegynder installation eller vedligeholdelse.
  • Use appropriate tools and wear safety glasses to prevent injury.
  • Overspænd ikke forbindelserne, da dette kan beskadige produktet eller VVS-systemet.
  • Verify all connections are secure and leak-free before restoring water supply.
  • Hold små dele væk fra børn for at undgå kvælningsfare.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • Håndbruser
  • 60-inch double interlock spiral hose (metal)
  • Handshower Bracket
  • 3 Washers (pre-installed)
Diagram showing the Moen Attune handshower, 60-inch metal hose, and handshower bracket, along with three pre-installed washers.
Figure 1: Included components of the Moen Attune Handheld Shower Head.

Specifikationer

FeatureDetalje
Modelnummer218H0SRN
SlutteSpot Resist børstet nikkel
MaterialeNickel, Plastic
Handshower Diameter4 tommer
Sprayindstillinger6 (Full Spray, Downpour, Relaxing Massage, Massage, Rinse, Full Coverage Light)
Slange længde60 tommer
Flowhastighed1.75 GPM (6.65 L/Min) Max
InstallationstypeVægmonteret
WaterSense certificeretJa

Installation

The Moen Attune Handheld Shower Head is designed for easy installation. Follow these general steps:

  1. Prepare the Shower Area: Turn off the main water supply to your shower. Remove your existing shower head and clean any debris from the shower arm threads.
  2. Install the Shower Arm Bracket: Apply plumber's tape to the threads of your shower arm. Thread the handshower bracket onto the shower arm and hand-tighten. Use a wrench to tighten an additional 1/4 to 1/2 turn, ensuring the bracket is securely oriented.
  3. Tilslut slangen: Attach one end of the 60-inch metal hose to the handshower bracket. Attach the other end of the hose to the handheld shower head. Ensure washers are properly seated in both connections and hand-tighten.
  4. Mount the Handshower: Place the handheld shower head into the bracket.
  5. Test for lækager: Turn the main water supply back on and check all connections for leaks. If leaks occur, tighten connections slightly until they stop.
The Moen Attune handheld shower head with its hose and wall-mounted bracket, shown in a brushed nickel finish.
Figure 2: Moen Attune Handheld Shower Head components installed.
A Moen Attune handheld shower head installed in a modern bathroom with herringbone tile, showcasing its brushed nickel finish and flexible hose.
Figure 3: Moen Attune Handheld Shower Head installed in a shower.

Betjeningsvejledning

Your Moen Attune Handheld Shower Head offers 6 distinct spray settings. To change the spray pattern, rotate the dial on the face of the shower head. The available settings include:

  • Fuld sprøjtning: A comprehensive, invigorating spray.
  • Regnskyl: A concentrated, heavy flow.
  • Afslappende massage: A gentle, pulsating massage spray.
  • Massage: A more intense, targeted massage spray.
  • Skylle: A focused stream for efficient rinsing.
  • Full Coverage Light: A lighter, broader spray for general use.
The Moen Attune handheld shower head actively spraying water in a shower, demonstrating its functionality.
Figure 4: Moen Attune Handheld Shower Head in operation.
Et nærbillede view of the Moen Attune handheld shower head face, showing the nozzles and the Moen logo.
Figure 5: Close-up of the handshower face.

Product Video: Moen Attune Showering

Video 1: This video demonstrates the features and various spray settings of the Moen Attune Handheld Shower Head, showcasing its performance and design.

Opretholdelse

To maintain the appearance and performance of your Moen Attune Handheld Shower Head, follow these cleaning guidelines:

  • Punktbestandig finish: The Spot Resist Brushed Nickel finish is designed to resist fingerprints and water spots. To clean, simply wipe with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scrubbing pads, as these can damage the finish.
  • Rub-Clean Nozzles: The nozzles are designed for easy cleaning. If mineral deposits build up, gently rub the rubber nozzles with your finger or a soft brush to dislodge them. This helps maintain a consistent spray pattern.
  • Rengøring af slange: Wipe the metal hose with a soft, damp klud efter behov.
A close-up of a brushed nickel surface with water droplets, illustrating the Spot Resist Brushed Nickel finish.
Figure 6: Spot Resist Brushed Nickel Finish resists fingerprints and water spots.
A side-by-side comparison showing a clean brushed nickel surface labeled 'WITH SPOT RESIST' and a smudged, water-spotted surface labeled 'WITHOUT SPOT RESIST'.
Figure 7: Demonstration of Spot Resist Technology.

Fejlfinding

If you encounter issues with your Moen Attune Handheld Shower Head, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Lavt vandtrykClogged nozzles or flow restrictor.Clean the rub-clean nozzles. Ensure the flow restrictor (if present and removable per local codes) is not obstructed.
Leaking at ConnectionsLoose connections or improperly seated washers.Ensure all connections are hand-tightened, then use a wrench for an additional 1/4 to 1/2 turn. Verify washers are correctly placed. Apply plumber's tape if necessary.
Inkonsekvent sprøjtemønsterMineral buildup in nozzles.Gently rub the rubber nozzles to clear any blockages.

Garanti og support

The Moen Attune Handheld Shower Head is backed by Moen's Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Moen webwebstedet eller kontakt Moens kundeservice direkte.

For yderligere hjælp, besøg Moen-butikken på Amazon.

Relaterede dokumenter - 218H0SRN

Preview MOEN Engage håndbruser med seks funktioner, illustreret reservedelsliste
Find illustreret information om dele til MOEN Engage håndbruser med seks funktioner. Dette dokument viser modelnumre, typer og finish, inklusive delnumre til 59" slangen.
Preview Moen vandhanebehandlings- og rengøringsvejledning
Omfattende guide til rengøring og vedligeholdelse af Moen-vandhaner, inklusive LifeShine®- og Non-LifeShine®-typer, med instruktioner til generel rengøring, fjernelse af vandpletter og garantioplysninger.
Preview MOEN Banbury badekar-/bruseventil med enkeltgreb, illustreret reservedelsliste
Detaljeret illustreret reservedelsliste til MOEN Banbury badekar-/bruseventil med ét greb, inklusive modelnumre, beskrivelser og finish til brusehoveder, trimsæt, tude og indvendige komponenter.
Preview Moen Hamden 4" toiletarmatur illustrerede dele
Detaljeret illustreret delliste til Moen Hamden 4-tommer toiletarmatur (model 84300SRN) i punktbestandig børstet nikkel. Indeholder delnumre, beskrivelser, detaljer om afløbssamling og kompatibilitet med dæktykkelse.
Preview Moen Ronan toiletarmatur med ét greb, illustreret reservedelsliste og specifikationer
Detaljeret illustreret reservedelsliste til Moen Ronan toiletarmatur med ét greb (model 84021BL, 84021SRN). Find varenumre, beskrivelser og finish til dit Moen-armatur.
Preview Moen GRAEDENT™ To-grebs Centersæt Toiletarmatur Illustreret Reservedelsliste
Detaljeret illustreret delliste til Moen GRAEDENT™ toiletarmatur med to greb og centersæt (model 84137SRN). Indeholder delnumre og beskrivelser af håndtag, patroner, pakninger, monteringsmateriale, perlatorsæt og afløbssamlinger.