PROVISION ISR 2MP IP PoE Camera Instruction Manual

1. Produktet er slutview

This manual provides detailed instructions for the installation, operation, and maintenance of your PROVISION ISR 2MP IP PoE Camera. This camera is designed for both indoor and outdoor surveillance, offering high-definition video and robust features for security applications.

Nøglefunktioner:

• Billedbehandling i høj opløsning: 2MP video capture for clear and detailed surveillance.
• Power over Ethernet (PoE): Forenkler installationen ved at levere strøm og data via et enkelt Ethernet-kabel.
• Avanceret nattesyn: Infrared (IR) illumination up to 10 meters for clear imaging in low-light or total darkness.
• Vejrbestandigt design: IP67 rated for protection against dust and water, suitable for outdoor use.
• Smart Motion Detection: AI-based alerts for precise human movement detection.
• H.265+ Kompression: Efficient video compression to reduce storage requirements while maintaining video quality.
• Indbygget mikrofon: For audio monitoring capabilities.
• 3-akse justering: Allows flexible positioning of the camera lens.

Figur 1: Forside view of the PROVISION ISR 2MP IP PoE Dome Camera.

Figur 2: Nederst view of the PROVISION ISR 2MP IP PoE Dome Camera, showing the lens and mounting points.

2. Opsætning og installation

2.1 Pakkens indhold

• PROVISION ISR 2MP IP PoE Camera
• Instruktionsmanual (dette dokument)
• Monteringsskruer og ankre

2.2 Camera Components and Connections

Figure 3: Camera dimensions and connection interfaces. The camera features a Power In port, an RJ-45 port for Ethernet and Power over Ethernet (PoE), and an Audio In port.

Figure 4: Location of the built-in microphone and the SD card slot for local storage.

2.3 Montering af kameraet

1. Vælg en placering: Select a suitable indoor or outdoor location, ensuring a clear field of view and access to network cabling. The camera is designed for ceiling mount installation.
2. Forbered overfladen: Use the provided mounting template (if applicable, or measure the camera base) to mark the drill holes on the mounting surface.
3. Bore huller: Drill pilot holes for the mounting screws. Insert wall anchors if mounting on drywall or other soft materials.
4. Sikre kameraet: Juster kamerabasen med de borede huller, og fastgør den med de medfølgende skruer.
5. Juster vinkel: Loosen the adjustment screws (if present) to position the camera lens for the desired viewSpænd skruerne, når de er justeret.

Figure 5: The 3-Axis Mechanism allows for flexible adjustment of the camera's viewing angle (350° pan, 50° tilt, 355° rotation).

2.4 Tilslutning af kameraet

1. Network Connection (PoE): Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ-45 port. This will provide both power and network connectivity.
2. Network Connection (Non-PoE): If your network device does not support PoE, connect an Ethernet cable to the camera's RJ-45 port and connect a 12V DC power adapter (sold separately) to the camera's Power In port.
3. Lydindgang: If external audio input is required, connect an audio source to the Audio In port.

3. Betjening af kameraet

3.1 Indledende adgang og konfiguration

1. Netværksopdagelse: Use the manufacturer's provided software tool (e.g., IP Scanner) to discover the camera's IP address on your network.
2. Web Grænsefladeadgang: Åbn a web browser and enter the camera's IP address. Log in using the default username and password (refer to the camera's quick start guide or manufacturer's documentation for default credentials).
3. Skift standardlegitimationsoplysninger: For security purposes, immediately change the default username and password upon first login.
4. Netværksindstillinger: Configure network settings such as static IP address (if desired), subnet mask, and gateway.

3.2 Videoovervågning og -optagelse

• Levende View: Access the camera's live video feed through the web interface, NVR, or compatible mobile application.
• Indspilning: Configure recording schedules, motion-triggered recording, or continuous recording via the NVR or camera's web interface. The camera supports H.265+ compression for efficient storage.
• SD-kortlagring: Insert a compatible microSD card (up to specified capacity, typically 128GB or 256GB, not included) into the SD card slot for local video storage. Format the SD card through the camera's web interface før brug.

3.3 Bevægelsesdetektion og advarsler

• Konfiguration: Access the motion detection settings in the camera's web interface. Define detection zones, sensitivity levels, and trigger actions (e.g., record, send email notification).
• AI-baseret detektion: Utilize the camera's AI capabilities for more accurate human movement detection, reducing false alarms.

3.4 Nattesyn

The camera automatically switches to infrared (IR) night vision mode in low-light conditions. The IR illuminators provide clear black-and-white video up to 10 meters. Ensure no obstructions block the IR LEDs for optimal performance.

4. Vedligeholdelse

4.1 Rengøring

• Linse: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution designed for optical surfaces.
• Bolig: Rengør kamerahuset med en sprayamp klæde. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.

4.2 firmwareopdateringer

Periodically check the PROVISION ISR official website for firmware updates. Firmware updates can improve camera performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

5. Fejlfinding

5.1 No Power/No Video

• Tjek strøm: Ensure the camera is receiving power. If using PoE, verify the PoE switch/NVR port is active. If using a power adapter, ensure it is correctly connected and functional.
• Netværkskabel: Verify the Ethernet cable is securely connected at both ends and is not damaged. Try a different cable.
• Genstart: Disconnect and reconnect power to the camera to perform a reboot.

5.2 Cannot Access Camera via Network

• IP-adresse: Confirm the camera's IP address using the discovery tool. Ensure your computer is on the same network segment as the camera.
• Firewall: Check if your computer's firewall or network security settings are blocking access to the camera.
• Standardindstillinger: If you have forgotten the password, you may need to reset the camera to factory defaults (refer to manufacturer's documentation for reset procedure).

5.3 Dårlig billedkvalitet

• Ren linse: Sørg for, at kameralinsen er ren og fri for støv eller pletter.
• Belysning: Verify adequate lighting in the surveillance area. For night vision, ensure IR LEDs are not obstructed.
• Opløsningsindstillinger: Check the video resolution settings in the camera's web interface to ensure it is set to 2MP or desired quality.

6. Specifikationer

Figure 6: Visual summary of key camera specifications and features.

7. Garanti og support

7.1 Produktgaranti

PROVISION ISR products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official PROVISION ISR webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region og model.

7.2 Teknisk support

For technical assistance, troubleshooting, or further inquiries, please contact PROVISION ISR customer support. Contact information can usually be found on the official PROVISION ISR webwebsted eller i produktemballagen.

You can visit the PROVISION ISR store on Amazon for more information: PROVISION ISR Store