1. Introduktion
Thank you for choosing a PERLESMITH TV Wall Mount. This manual provides detailed instructions for the safe and proper installation and operation of your PSMTK1 Tilting TV Wall Mount and PSXFK1 Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure correct assembly and to prevent potential damage or injury. Keep this manual for future reference.
Billede 1.1: Overview of PERLESMITH PSMTK1 Tilting TV Wall Mount (top) and PSXFK1 Full Motion TV Wall Mount (bottom).
2. Sikkerhedsoplysninger
ADVARSEL: Failure to read and follow all instructions, warnings, and cautions in this manual may result in serious personal injury, property damage, or voiding of your warranty. If you have any questions regarding these instructions, please contact PERLESMITH customer service.
- Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
- Ensure that the mounting surface can safely support the combined weight of the mount and the television.
- Never exceed the maximum weight capacity specified for each mount model.
- Do not install on drywall alone. Always mount into wood studs, solid concrete, or brick walls.
- Use only the hardware provided or specified by PERLESMITH.
- If you are unsure about any part of the installation process, seek assistance from a qualified professional installer.
- Hold børn og kæledyr væk under installationen.
3. Kompatibilitetskontrol
Before proceeding with installation, verify that your TV and wall are compatible with the chosen PERLESMITH wall mount.
3.1. TV Size and Weight
- PSMTK1 Tilting Mount: Fits most 23" - 60" TVs, up to 115 lbs (52 kg).
- PSXFK1 Full Motion Mount: Fits most 50" - 90" TVs, up to 165 lbs (75 kg).
Image 3.1: PSMTK1 mount supports TVs from 23 to 60 inches with a maximum load of 115 lbs.
3.2. VESA Mounting Pattern
The VESA pattern refers to the distance between the four mounting holes on the back of your TV. Measure these distances (width x height in mm) to ensure compatibility.
- PSMTK1 Tilting Mount: Compatible with VESA patterns from 75x75mm up to 400x400mm.
- PSXFK1 Full Motion Mount: Compatible with VESA patterns from 200x200mm up to 800x400mm.
Image 3.2: PSMTK1 VESA compatibility ranging from 75x75mm to 400x400mm.
3.3. Wall Type
Both mounts are designed for installation on:
- Wood studs (16-inch spacing for PSMTK1; 16-24 inch spacing for PSXFK1).
- Solid concrete walls.
- Brick walls.
VIGTIG: Do not install these TV mounts on drywall alone. Always ensure the mount is secured into a structural element of the wall.
Image 3.3: Illustration of compatible wall types: 8-16" wood studs, solid concrete, and brick. Drywall alone is not supported.
4. Pakkens indhold
Please check the package contents against the parts list provided in your product box to ensure all components are present and undamaged. If any parts are missing or defective, contact PERLESMITH customer service for assistance.
Typisk indhold omfatter:
- Vægplademontering
- TV Brackets (Left & Right)
- Monteringssæt (forskellige skruer, skiver, afstandsstykker til TV og væg)
- Concrete Anchors (if applicable)
- Bubble Level (for some models)
- Cable Ties (for some models)
5. Opsætning og installation
The installation process involves securing the wall plate to your wall and attaching the TV brackets to your television, then mounting the TV onto the wall plate.
5.1. Nødvendigt værktøj (medfølger ikke)
- Stolpefinder (til montering af træstolper)
- Bor med passende bor
- Phillips hovedskruetrækker
- Stiknøgle
- Blyant
- Målebånd
5.2. Trin-for-trin installation
- Find monteringsposition: Determine the desired height for your TV. Use a stud finder to locate the center of the wood studs if mounting on wood. Mark the drilling points for the wall plate.
- Bor pilothuller: Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete/brick, use a masonry drill bit and insert the provided anchors.
- Fastgør vægplade: Secure the wall plate to the wall using the lag bolts and washers. Ensure it is level using a bubble level.
- Fastgør TV-beslag: Carefully place your TV face down on a soft, clean surface. Attach the TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
- Monter TV på vægplade: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. For PSMTK1, ensure the brackets engage the wall plate securely. For PSXFK1, extend the arm and attach the TV.
- Sikkert TV: For PSMTK1, pull the quick-release straps down to engage the locking mechanism, securing the TV to the wall plate. For PSXFK1, ensure all locking mechanisms are engaged.
Image 5.1: PSMTK1 installation is simplified, featuring a pull cord for lock and release.
Image 5.2: PSMTK1 features dual bracket hooks and a pull cord locking mechanism for reliable security.
Image 5.3: PSMTK1 offers stronger support with an enhanced hook for drop-free use and a secure anti-drop buckle.
Image 5.4: PSMTK1 includes anti-drop edges to prevent the TV from sliding off the sides.
6. Betjeningsvejledning
6.1. PSMTK1 Tilting TV Wall Mount
The PSMTK1 mount allows for easy tilting to optimize your viewing angle and reduce glare.
- Justering af hældning: Gently push or pull the bottom of your TV to achieve the desired tilt angle (up to 7 degrees). The mount is designed to hold the tilt position.
- Låsemekanisme: The mount features a locking mechanism with quick release straps. To secure the TV, ensure the straps are pulled down to engage the lock. To disengage the lock for removal, pull the straps down firmly.
Image 6.1: PSMTK1 allows for a -7° tilt to reduce glare, suitable for 23"-60" TVs.
6.2. PSXFK1 Full Motion TV Wall Mount
The PSXFK1 mount offers full motion capabilities, including swivel, tilt, and extension, for maximum viewfleksibilitet.
- Udvidelse og tilbagetrækning: Gently pull the TV away from the wall to extend the arm (up to 23.62 inches). Push the TV back towards the wall to retract it (to a minimum of 3.07 inches).
- Drejejustering: Carefully pivot the TV left or right to achieve your desired viewing angle (up to 60 degrees in each direction).
- Justering af hældning: Adjust the vertical tilt of the TV by loosening the tilt knobs (if present), setting the angle (typically +5° to -15°), and then tightening the knobs to secure the position.
Image 6.2: PSXFK1 extends up to 23.62 inches and retracts to 3.07 inches from the wall.
Image 6.3: PSXFK1 allows for tilt adjustments of +5°/-15° and swivel of ±60°.
7. Vedligeholdelse
Regelmæssig vedligeholdelse er med til at sikre, at dit TV-vægbeslag holder længe og fungerer sikkert.
- Rensning: Tør holderen af med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Periodiske kontroller: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme og sikre. Vibrationer eller bevægelse kan med tiden få fastgørelseselementer til at løsne sig.
- Undersøg for skader: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, contact PERLESMITH customer service.
8. Fejlfinding
If you encounter issues during or after installation, refer to the following common troubleshooting tips.
- TV'et er ikke i vater: Ensure the wall plate is perfectly level before securing it to the wall. Some mounts allow for minor post-installation leveling adjustments on the TV brackets.
- Fæstet føles løst: Re-check all wall mounting bolts and TV bracket screws. Ensure they are tightened securely. Do not overtighten.
- Vanskeligheder med at justere hældning/drejevinkel: For full motion mounts, ensure no cables are snagged or restricting movement. For tilt mounts, ensure the tilt mechanism is not overly stiff; some require a firm but gentle push.
- Manglende dele: If any parts were missing from the package, contact PERLESMITH customer support immediately for replacements.
9. Specifikationer
| Feature | PSMTK1 Tilting Mount | PSXFK1 Full Motion Mount |
|---|---|---|
| Tv -størrelse kompatibilitet | 23" - 60" | 50" - 90" |
| Vægt kapacitet | Op til 115 lbs (52 kg) | Op til 165 lbs (75 kg) |
| VESA Compatibility (Min-Max) | 75x75mm - 400x400mm | 200x200mm - 800x400mm |
| Tilt vinkel | Up to -7° | +5° til -15° |
| Drejevinkel | N/A (Fixed) | Up to ±60° |
| Forlængelse fra væg | 1.2" (Low-profile) | 3.07" - 23.62" |
| Kompatibilitet mellem vægtyper | Wood Studs (16"), Solid Concrete, Brick | Wood Studs (16-24"), Solid Concrete, Brick |
| Materiale | Legeret stål | Legeret stål |
Image 9.1: PSMTK1 features a super slim design with a 1.2" low-profile se.
Image 9.2: PSXFK1 features reinforced steel construction, supporting up to 165 lbs.
10. Garanti og kundesupport
PERLESMITH is committed to providing high-quality products and excellent customer service. Your PERLESMITH TV wall mount comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.
If you have any questions, require technical assistance, or need to report a missing/damaged part, please contact PERLESMITH customer support through the contact information provided on our official website or your product packaging. Please have your model number (PSMTK1 or PSXFK1) and purchase details ready when contacting support.
