1. Introduktion og produktoversigtview
The Einhell Power X-Car Charger 3A is designed to quickly charge all batteries within the Einhell Power X-Change system series. This charger provides flexibility by allowing you to charge your Power X-Change batteries directly from your vehicle's 12V power outlet, making it ideal for use in cars, caravans, or other mobile environments.
Nøglefunktioner omfatter:
- Mobil opladning: Equipped with a 12V plug for charging PXC batteries on the go.
- Universal kompatibilitet: Compatible with all batteries in the Power X-Change series.
- Intelligent Charging Management: Continuously monitors batteries for optimal charging and safety.
- Beskyttelse af bilbatteri: Funktioner 2-stage protection electronics with an LED indicator to ensure your car battery remains capable of starting the vehicle.
- Hurtig opladningsteknologi: 3-amp fast charging for short charging times.
- Opdateringstilstand: Reactivates deeply discharged batteries.
- Status LED-indikator: Provides comprehensive information on charging status and battery condition via a 7-way LED display.
Figure 1: The Einhell Power X-Car Charger 3A with its 12V plug.
2. Pakkens indhold
Tjek venligst pakken for følgende varer:
- 1 x Einhell Power X-Car Charger 3A
Hvis der mangler eller er beskadigede varer, bedes du kontakte kundesupport.
3. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger, når du bruger opladeren:
- Læs alle instruktioner før brug.
- Udsæt ikke opladeren for regn eller våde forhold.
- Use only with Einhell Power X-Change batteries.
- Sørg for korrekt ventilation under opladning.
- Forsøg ikke at adskille eller modificere opladeren.
- Opbevares utilgængeligt for børn.
- Disconnect from power source when not in use or before cleaning.
4. Opsætning
To set up your Einhell Power X-Car Charger 3A:
- Tilslut til køretøjets strømforsyning: Insert the 12V plug of the charger firmly into your vehicle's 12V accessory socket (cigarette lighter socket). Ensure the connection is secure.
- Indsæt batteri: Slide your Einhell Power X-Change battery into the charging slot on the charger. Ensure it clicks into place.
- Observe Indicators: The LED indicators on the charger will illuminate to show the charging status.
Figure 2: Connecting the charger to a vehicle's 12V power outlet.
Figure 3: The charger converts 12V vehicle power to 18V for battery charging.
5. Betjeningsvejledning
Once the charger is connected and a battery is inserted, the intelligent charging management system will begin the charging process. The 7-way status LED indicator provides real-time feedback:
- Opladningsstatus: LEDs indicate the current charge level of the battery.
- Opladning fuldført: An LED will indicate when the battery is fully charged.
- Fault/Error: Specific LEDs will light up to indicate potential issues such as overheating or a defective battery.
- Opdateringstilstand: If a deeply discharged battery is inserted, the charger may automatically enter refresh mode to reactivate it. This process can take some time.
Figure 4: Close-up of the 7-way status LED display on the charger.
Bilbatteribeskyttelse
The charger incorporates a 2-stage protection electronics system for your vehicle's battery. This system monitors the vehicle's battery voltage and will prevent excessive discharge, ensuring that your car can still be started. An LED indicator will provide status on the car battery protection.
Figure 5: Icon representing the car battery protection feature.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your Einhell Power X-Car Charger 3A:
- Rensning: Disconnect the charger from all power sources and batteries before cleaning. Use a dry, soft cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Opbevaring: Opbevar opladeren et tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Inspektion: Periodically inspect the charger and its cables for any signs of damage. Do not use if damaged.
7. Fejlfinding
If you encounter issues with your charger, consider the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren tænder ikke. | No power from 12V socket; loose connection. | Check vehicle's 12V socket for power; ensure plug is fully inserted. |
| Batteriet oplades ikke. | Battery not properly inserted; battery is defective; charger fault. | Re-insert battery; try a different battery; observe LED indicators for fault codes. |
| Car battery protection LED active. | Køretøjsbatteri voltage er lav. | The charger is protecting your car battery. Charging may pause or slow down. Start the vehicle if necessary. |
| Refresh mode active for a long time. | Batteriet er dybt afladet. | This is normal for deeply discharged batteries. Allow the process to complete. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte Einhells kundesupport.
8. Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | 4512113 |
| Input bindtage | 12 Volts (DC, via car plug) |
| Udgang Voltage | 18 volt |
| Ladestrøm | 3 Amps |
| Produktmål (L x B x H) | 4.21 x 5.08 x 2.36 tommer (10.69 x 12.90 x 5.99 cm) |
| Varens vægt | 10.6 ounce (0.3 kilo) |
| Farve | Rød/sort |
| Fabrikant | Einhell Germany AG |
9. Garanti og support
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Einhell webwebsted. For teknisk support, reservedele eller serviceforespørgsler, kontakt venligst Einhells kundeservice direkte.
Einhell kundeservice:
- Please refer to your regional Einhell webwebsted for kontaktoplysninger.
