Manualer+

ZIOCOM BH045B

ZIOCOM 2-i-1 trådløs Bluetooth-sender/modtager brugermanual

Model: BH045B

1. Produktet er slutview

The ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver is a versatile audio adapter designed to enhance your audio experience by adding Bluetooth capabilities to non-Bluetooth devices. It functions as both a transmitter (TX mode) to send audio from your TV, PC, or MP3 player to Bluetooth headphones or speakers, and a receiver (RX mode) to stream audio from your smartphone or tablet to wired speakers, car stereos, or home sound systems. Featuring Bluetooth 5.0 and aptX Low Latency technology, it ensures high-quality audio with minimal delay.

ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver with included cables

Figure 1: ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver and accessories.

Pakkeindhold:

  • ZIOCOM 2-in-1 Bluetooth Transmitter/Receiver (BH045B)
  • 3.5 mm lydkabel
  • RCA til 3.5 mm lydkabel
  • USB opladningskabel
  • Brugermanual
Contents of the ZIOCOM 2-in-1 Bluetooth Transmitter/Receiver package

Figure 2: Package contents including the device, various cables, and user manual.

2. Enhedslayout og kontroller

Diagram showing the layout of the ZIOCOM Bluetooth adapter with labeled ports and buttons.

Figure 3: Device layout with key components labeled.

  • Multifunktionsknap: Power On/Off, Play/Pause, Answer/End/Reject Calls, Redial.
  • Volume Up/Previous Song Button: Increase volume, navigate to previous track.
  • Volume Down/Next Song Button: Decrease volume, navigate to next track.
  • Parringsknap: Starter Bluetooth-parringstilstand.
  • TX/RX-switch: Toggles between Transmitter and Receiver modes.
  • Indikatorlys: Viser enhedens status (parring, tilsluttet, opladning).
  • Indbygget mikrofon: For hands-free calling in RX mode.
  • Type-C opladningsport: Til opladning af det interne batteri.
  • AUX port: 3.5mm audio input/output.

3. Opsætning og opladning

Indledende opladning:

Before first use, fully charge the device. Connect the supplied USB charging cable to the Type-C charging port on the adapter and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The indicator light will show charging status and turn off when fully charged. A full charge takes approximately 2 hours.

ZIOCOM Bluetooth adapter charging while connected to a TV

Figure 4: The device can be used while charging, providing extended playtime.

Tænd/sluk:

  • Tænd: Press and hold the Multifunction Button for 3 seconds until the indicator light turns on.
  • Sluk: Press and hold the Multifunction Button for 3 seconds until the indicator light turns off.

4. Driftstilstande

The ZIOCOM adapter supports two primary operating modes: Transmitter (TX) and Receiver (RX). Use the TX/RX switch on the side of the device to select the desired mode.

Diagram illustrating TX and RX modes of the ZIOCOM Bluetooth adapter

Figur 5: Overview of Transmitter (TX) and Receiver (RX) modes.

4.1. Transmitter (TX) Mode

In TX mode, the adapter transmits audio from non-Bluetooth devices (e.g., TV, PC, MP3 player) to Bluetooth-enabled headphones or speakers.

Setup for TX Mode:

  1. Switch the device to TX mode using the TX/RX switch.
  2. Connect the ZIOCOM adapter to your audio source (TV, PC, MP3 player) using the 3.5mm audio cable or the RCA to 3.5mm audio cable. Plug the 3.5mm end into the adapter's AUX port and the other end into the audio output port of your source device.
  3. Power on the adapter. It will automatically enter pairing mode, indicated by a rapidly flashing blue light.
  4. Place your Bluetooth headphones or speaker into pairing mode.
  5. The adapter will automatically search for and connect to nearby Bluetooth devices. Once connected, the indicator light will turn solid blue.
Person watching TV with ZIOCOM Bluetooth adapter connected, indicating low latency audio

Figure 6: Enjoying low latency audio from TV in TX mode. (Note: Your receiving device must also support aptX Low Latency for optimal performance.)

Dual-Link in TX Mode:

The adapter can connect to two Bluetooth headphones/speakers simultaneously in TX mode.

  1. Connect the first Bluetooth device as described above.
  2. Once the first device is connected, press the Parringsknap on the ZIOCOM adapter. The indicator light will flash rapidly again.
  3. Put the second Bluetooth headphone/speaker into pairing mode.
  4. The adapter will connect to the second device. Both devices will now receive audio simultaneously.
Couple watching TV with two Bluetooth headphones connected via ZIOCOM adapter

Figure 7: Dual-link feature allowing two Bluetooth headphones to connect to a TV.

4.2. Receiver (RX) Mode

In RX mode, the adapter receives audio from Bluetooth-enabled devices (e.g., smartphones, tablets) and plays it through wired speakers, car stereos, or home sound systems.

Setup for RX Mode:

  1. Switch the device to RX mode using the TX/RX switch.
  2. Connect the ZIOCOM adapter to your wired audio system (speakers, car stereo) using the 3.5mm audio cable or the RCA to 3.5mm audio cable. Plug the 3.5mm end into the adapter's AUX port and the other end into the audio input port of your wired system.
  3. Power on the adapter. It will automatically enter pairing mode, indicated by a rapidly flashing blue light.
  4. Aktiver Bluetooth på din smartphone eller tablet, og søg efter

    Relaterede dokumenter - BH045B

    Preview ZIOCOM BT5804F Bluetooth-sender/modtager brugermanual
    Udforsk ZIOCOM BT5804F Bluetooth-sender og -modtager. Denne brugermanual indeholder detaljerede instruktioner, specifikationer og funktioner til lydadapteren, herunder aptX Low Latency og Bypass-tilstand.
    Preview ZIOCOM BT5809 Bluetooth 5.0 Sendermodtager brugervejledning
    Comprehensive user guide for the ZIOCOM BT5809, a wireless long-range Bluetooth 5.0 Transmitter, Receiver, and bypass device. Learn about product specifications, setup, operation modes (Receiver, Transmitter, Bypass), pairing, troubleshooting, and warranty information.
    Preview ZIOCOM RC02 Bluetooth Aux-adapter brugermanual
    User manual for the ZIOCOM RC02 Bluetooth Aux Adapter. Learn about product specifications, how to pair and use the device for wireless audio streaming and hands-free calls, troubleshooting, and maintenance. Compatible with car stereos and home audio systems.
    Preview ZIOCOM BT4853C Bluetooth 5.0 Transmitter Receiver Brugervejledning
    User manual for the ZIOCOM BT4853C Bluetooth 5.0 transmitter and receiver. Provides instructions on setup, operation in TX and RX modes, pairing, volume control, and troubleshooting for this wireless audio adapter.
    Preview ZIOCOM LS01 SOUL 3 30-bens Bluetooth-lydmodtager brugermanual
    User manual for the ZIOCOM LS01 SOUL 3, a 30-pin Bluetooth audio receiver. Provides detailed instructions on specifications, power on/off, connecting via 30-pin or 3.5mm Aux, pairing with two devices, low battery alerts, and support contact information.
    Preview ZIOCOM BT4871 Bluetooth-adapter brugermanual
    This manual provides instructions for using the ZIOCOM BT4871 30-pin Bluetooth adapter to upgrade Bose iPod SoundDock speakers and other 30-pin dock speakers. It covers setup, connection, troubleshooting, and product specifications.