MIWAT 20W Plug-in LED Motion Sensor Flood Light User Manual

1. Introduktion

Tak for købetasing the MIWAT 20W Plug-in LED Motion Sensor Flood Light. This product is designed to provide efficient and reliable security lighting for both outdoor and indoor environments. Equipped with a PIR (Passive Infrared) motion sensor, it offers automatic illumination when motion is detected, enhancing safety and convenience while saving energy.

Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your flood light.

2. Sikkerhedsoplysninger

• Afbryd altid strømmen før installation, service eller rengøring af armaturet.
• Sørg for, at strømkilden voltage opfylder produktets krav (110V AC).
• Do not look directly into the LED light source when it is illuminated, as it may cause eye strain or damage.
• This product is rated IP66 for rainproof protection. While suitable for outdoor use, avoid submerging it in water.
• Installationen bør udføres af en kvalificeret elektriker, hvis du er usikker på den elektriske ledningsføring.
• Hold produktet væk fra brændbare materialer.

3. Pakkens indhold

• 1 x MIWAT 20W LED Motion Sensor Flood Light
• Mounting Screws (Light kit included)
• Brugervejledning (dette dokument)

4. Produktet er slutview

The MIWAT 20W LED Motion Sensor Flood Light features a compact design with a powerful LED array and an integrated PIR motion sensor. The sensor is adjustable to optimize detection range and light duration.

Figure 4.1: MIWAT 20W LED Motion Sensor Flood Light with integrated motion sensor and power cord.

Figure 4.2: Illustration of the 120-degree human motion sensor, demonstrating how it turns lights on when people approach and off when they leave.

Figur 4.3: Detaljeret view of the infrared sensor's adjustment dials for SENS (sensitivity), TIME (duration), and LUE (light sensor).

Figure 4.4: Key features including upgraded high thermal conductivity heatsinks for efficient heat dissipation, high-quality LED lamp beads for brightness and durability, and the 1.5m (4.9ft) power cord.

5. Opsætning og installation

The MIWAT flood light is designed for easy installation with its plug-in design, requiring no complex wiring. It comes with a 4.9ft (1.5m) power cord and a US plug.

Monteringsmuligheder:

The flood light can be mounted on walls, ground, or ceilings using the adjustable bracket. Ensure the mounting surface is stable and can support the weight of the fixture.

Figure 5.1: Various mounting configurations: Wall Mounting, Ground Mounting, and Ceiling Mounting.

Installationstrin:

1. Vælg placering: Select a suitable location for installation, considering the desired lighting area and motion detection coverage.
2. Markér borepunkter: Use the mounting bracket as a template to mark the drilling points on the wall, ground, or ceiling.
3. Bore huller: Drill holes at the marked points. Insert wall anchors if necessary for secure mounting.
4. Fastgør beslag: Fastgør monteringsbeslaget til overfladen med de medfølgende skruer.
5. Monter lysarmatur: Attach the flood light fixture to the secured bracket. Adjust the angle of the light and the motion sensor as needed. The bracket allows for 180-degree adjustment.
6. Tilslut: Sæt netledningen i en standard 110V AC stikkontakt.

For a detailed installation guide, you may refer to the official Installation Manual (PDF) available online.

6. Betjeningsvejledning

The MIWAT flood light features an adjustable PIR motion sensor with three control dials:

• SENS (følsomhed): Adjusts the detection distance of the motion sensor.
• TIME (Time Duration): Angiver, hvor længe lyset forbliver tændt, efter der er registreret bevægelse.
• LUE (Light Sensor/Lux): Determines the ambient light level at which the sensor becomes active (dusk to dawn).

Justering af sensorindstillinger:

Refer to Figure 4.3 for the location of these dials on the sensor head.

• SENS (Distance): Turn the dial to adjust the sensing range. A higher setting increases the detection distance (radial travel: 1.5-2 meters, left-right travel: 2-10 meters).
• TID: Turn the dial to set the duration the light remains on after motion is detected. The adjustable range is typically from 4 seconds to 2 minutes (150s max).
• LUE (Lux): Turn the dial to set the ambient light threshold. Towards the 'sun' icon, the sensor will activate in brighter conditions (day and night). Towards the 'moon' icon, it will only activate in darker conditions (night only).

Experiment with these settings to find the optimal configuration for your specific needs and environment.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.

• Rensning: Periodically wipe the light fixture and sensor lens with a soft, damp klud til at fjerne støv og snavs. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Regularly check the power cord and plug for any signs of damage. Ensure all mounting screws are tight.
• Sensorafstand: Ensure the motion sensor is not obstructed by plants, furniture, or other objects that could interfere with its detection capabilities.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

MIWAT provides a 24-måneders garanti for this product. If you encounter any product problems or require assistance, please contact MIWAT customer support.

To contact support, please refer to the 'Seller Contact' option on the product's purchase platform. We aim to respond to all inquiries within 24 hours.

For yderligere ressourcer kan du også henvise til Installationsmanual (PDF).