1. Introduktion
This manual provides detailed instructions for the proper setup, operation, and maintenance of your SelfieShow Portable 41 Inch Selfie Stick Phone Tripod with Wireless Remote and Fill Light, Model Q02S. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
2. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- SelfieShow Selfie Stick Tripod with integrated phone holder
- Aftagelig trådløs fjernbetjening
- Detachable LED Fill Light
- USB Charging Cable (for fill light)
- Lithium Metal Battery (for remote, often pre-installed or spare)
- Brugervejledning (dette dokument)

3. Produktet er slutview
Familiarize yourself with the main components of your SelfieShow Q02S device:
- Telefonholder: Securely grips your smartphone. Features 360° rotation and 225° neck adjustment.
- Udtrækkelig stang: Multi-section stainless steel rod for adjustable length.
- Stativbase: Foldable legs for stable freestanding use.
- Håndtag: Ergonomic grip for handheld use.
- Trådløs fjernbetjening: Detachable Bluetooth remote for capturing photos/videos.
- LED-fyldningslys: Detachable light with multiple color modes and brightness levels.

4. Opsætningsvejledning
4.1 Unfolding the Selfie Stick Tripod
- Hold godt fast i håndtaget.
- Gently pull the phone holder upwards to extend the rod.
- To use as a tripod, spread the three legs at the bottom of the handle until they are fully extended and stable.
- Adjust the extendable rod to your desired height.

4.2 Tilslutning af din smartphone
- Open the phone holder clamps. The holder supports phones with widths between 2.5 and 3.6 inches (6.5-9.2 cm).
- Carefully place your smartphone into the holder, ensuring it is securely gripped by the silicone pads.
- Adjust the phone holder's angle and rotation (360° rotation, 225° neck adjustment) to achieve the desired viewing or shooting position. Tighten any locking mechanisms if present to secure the angle.

4.3 Parring af den trådløse fjernbetjening
- Ensure the remote control has a working battery. If not, replace the Lithium Metal battery.
- Turn on the remote control by pressing and holding the button until an indicator light flashes (usually blue).
- Gå til Bluetooth-indstillinger på din smartphone, og aktiver Bluetooth.
- Søg efter available devices. The remote will typically appear as "SelfieShow" or a similar name.
- Select the device to pair. The indicator light on the remote will stop flashing or turn solid once paired.
- The remote is now ready to use for capturing photos or starting/stopping videos.

4.4 Using the Detachable LED Fill Light
- Attach the fill light to the designated slot on the phone holder.
- Press the power button on the fill light to turn it on.
- Press the button repeatedly to cycle through the 3 color modes (White, Natural, Warm) and 2 brightness levels for each mode.
- To charge the fill light, connect it to a USB power source using the provided USB charging cable.

5. Betjeningsvejledning
5.1 Brug som selfiestang
For handheld use, ensure the tripod legs are folded securely into the handle. Extend the rod to your desired length and hold the handle firmly. Use the wireless remote to capture photos or videos.
5.2 Brug som stativ
Extend the tripod legs fully on a flat, stable surface. Adjust the rod height and phone holder angle as needed. For optimal stability, ensure the legs are spread wide and the center of gravity is balanced, especially with heavier phones or when fully extended.
5.3 Adjusting Angles and Orientation
The phone holder allows for 360° rotation and 225° neck adjustment. Loosen the locking knob (if applicable), adjust your phone to horizontal or vertical orientation, and tilt it to the desired angle. Tighten the knob to secure the position.
5.4 Optagelse af billeder og videoer
Once your phone is securely mounted and the remote is paired, open your phone's camera application. Press the button on the wireless remote control to take a photo or start/stop video recording.
6. Vedligeholdelse
- Rensning: Tør enheden af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Opbevar selfie-stativet et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Batteri: Replace the remote control battery when its performance diminishes. Recharge the fill light regularly.
- Undgå vand: This product is not waterproof. Avoid exposure to water or high humidity.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen parrer ikke. | Remote battery low or dead; Bluetooth not enabled on phone; remote not in pairing mode. | Replace remote battery. Ensure phone Bluetooth is on. Press and hold remote button to enter pairing mode. |
| Remote control not taking photos. | Not paired; camera app not open; phone settings issue. | Verify pairing. Open camera app. Check phone camera settings for volume button shutter function. |
| Stativet er ustabilt. | Legs not fully extended; uneven surface; phone too heavy or off-center. | Ensure legs are fully spread. Place on a flat, stable surface. Center the phone in the holder. Avoid extending to maximum height with heavy phones. |
| Fill light not turning on/charging. | Battery depleted; charging cable faulty; light switch off. | Charge the fill light using the provided USB cable. Ensure the light's power switch is on. |
8. Specifikationer
- Model: Q02S
- Materiale: Rustfrit stål
- Foldet længde: 7.6 tommer (19.4 cm)
- Forlænget længde: Op til 41.7 tommer (106 cm)
- Varens vægt: 5.8 ounce (164 gram)
- Telefonholderens bredde: 2.5-3.6 tommer (6.5-9.2 cm)
- Rotation: 360° (phone holder), 225° (neck)
- Fyld lys: 3 Color Modes (White, Natural, Warm), 2 Brightness Levels
- Fjernbetjening: Bluetooth compatible (iOS 5.1+ / Android 4.4+)
- Batteri (fjernbetjening): 1 Lithium Metal batteri (medfølger)
- Battery (Fill Light): Rechargeable (USB charging)
9. Sikkerhedsoplysninger
- Produktet må ikke skilles ad eller modificeres.
- Opbevares utilgængeligt for børn.
- Undgå at udsætte enheden for ekstreme temperaturer, direkte sollys eller ild.
- Do not use in wet conditions or immerse in water.
- Ensure your phone is securely mounted before use to prevent drops.
- When using as a tripod, place on a stable, level surface to prevent tipping.
10. Garanti og support
SelfieShow products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official SelfieShow webwebsted.
Manufacturer: LDP
