Indledning
The SANUS Universal Soundbar TV Mount Kit (Model SOA-SBM2) is designed to securely attach your soundbar directly to your TV wall mount, positioning it right under your television. Crafted from premium steel, this mount supports soundbars weighing up to 15 lbs. It is compatible with a wide range of soundbar brands, including Samsung, Roku, Bose, Vizio, and LG, and is designed to accommodate both rear and bottom-mounted soundbars. Its adjustable design ensures optimal sound projection, even with Dolby Atmos compatible soundbars.
Sikkerhedsoplysninger
- Read all instructions before installation and assembly. If you have any questions regarding the instructions or warnings, please contact customer support.
- Do not exceed the weight capacity of 15 lbs (6.8 kg). Serious injury or property damage may occur.
- Ensure the TV wall mount to which this soundbar mount is attached is securely installed and rated for the combined weight of the TV and soundbar.
- Use caution when handling and installing. Always use appropriate lifting techniques.
- Dette produkt er kun beregnet til indendørs brug.
Pakkens indhold
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install. Contact SANUS customer service for assistance.
Image: All assembly hardware included, neatly organized for easy identification.
Inkluderede komponenter:
- Soundbar Mount Arms (2)
- Soundbar Brackets (2)
- Mounting Hardware Kit (various screws, washers, spacers, hex key)
- Instruktionsmanual
Opsætning og installation
The SANUS Universal Soundbar TV Mount is designed for easy installation, typically in less than 15 minutes. No drilling is required for the soundbar mount itself, as it attaches directly to your existing TV wall mount.
Image: Easy installation process, attaching the soundbar mount to the TV and existing wall mount.
Installationstrin:
- Prepare Your Soundbar: Identify the mounting points on your soundbar. The mount supports both rear and bottom-mounted soundbars. Attach the soundbar brackets to your soundbar using the appropriate screws from the hardware kit.
- Attach Mount Arms to TV: If your TV is already mounted, you may need to temporarily remove it from the wall mount. Attach the soundbar mount arms to the VESA mounting holes on the back of your TV, alongside your existing TV wall mount brackets. Ensure they are securely fastened.
- Connect Soundbar to Mount Arms: Slide the soundbar (with attached brackets) onto the soundbar mount arms. Secure it in place using the provided hardware.
- Re-mount TV (if removed): If you removed your TV, carefully re-mount it to your wall mount.
- Adjust Height and Depth: Loosen the knobs on the mount arms to adjust the height and depth of the soundbar. This allows you to position the soundbar optimally and prevent blockage of ceiling-deflected sound for Dolby Atmos setups. Tighten the knobs with the included hex key to secure the position.
Image: The soundbar mount seamlessly integrates with your existing TV wall mount.
Image: Adjustable height and depth for optimal sound and compatibility with various soundbar types.
Image: Tool-free tension adjustment knobs ensure the soundbar remains level and secure.
Betjeningsvejledning
Once installed, the SANUS Universal Soundbar TV Mount allows your soundbar to move in perfect synchronicity with your TV, especially when attached to a full-motion TV mount. This ensures that the sound is always directed towards your viewing position, providing an optimal audio experience from any seat in the room.
Image: The soundbar moves with your TV, ensuring consistent audio direction.
Adjusting Soundbar Position:
- Højdejustering: To adjust the vertical position of your soundbar, loosen the height adjustment knobs on the mount arms. Slide the soundbar up or down to the desired height, then re-tighten the knobs securely.
- Dybdejustering: To adjust how far the soundbar protrudes from the TV, loosen the depth adjustment screws. Slide the soundbar forward or backward to achieve the optimal depth, especially important for preventing obstruction of up-firing speakers on Dolby Atmos soundbars. Re-tighten the screws firmly.
Opretholdelse
The SANUS Universal Soundbar TV Mount requires minimal maintenance to ensure its longevity and continued performance.
- Rensning: Dust the mount periodically with a soft, dry cloth. For more stubborn dirt, a slightly damp en tør klud kan bruges. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Fastgørelseskontrol: Periodically check all screws and fasteners to ensure they remain tight and secure. Over time, vibrations or adjustments may cause them to loosen slightly. Re-tighten as necessary.
- Bevægelsestjek: If your soundbar mount is attached to a full-motion TV mount, occasionally check the movement mechanisms to ensure they operate smoothly.
Fejlfinding
If you encounter any issues with your SANUS Universal Soundbar TV Mount, refer to the following common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Soundbar sags or is not level. | Tension knobs are not tightened sufficiently. | Ensure the tool-free tension adjustment knobs are fully tightened with the included hex key. |
| Soundbar does not attach to mount. | Incorrect screws or mounting method for soundbar. | Refer to your soundbar's manual for its specific mounting requirements (rear or bottom). Use the correct screws and spacers from the SANUS hardware kit. |
| Soundbar blocks TV screen or sound. | Incorrect height or depth adjustment. | Adjust the height and depth of the soundbar using the adjustment knobs/screws until it clears the TV screen and does not obstruct sound, especially for up-firing speakers. |
| Bjerget føles ustabilt. | Mounting screws to TV or soundbar not tight; TV wall mount itself is unstable. | Verify all screws connecting the soundbar mount to the TV and soundbar are securely tightened. Also, ensure your primary TV wall mount is properly installed and stable. Do not exceed the 15 lbs weight capacity. |
If the problem persists, please contact SANUS customer support.
Specifikationer
| Modelnummer | SOA-SBM2 |
| Mærke | Sanus |
| Materiale | Legeret stål |
| Farve | Sort |
| Maksimal vægtkapacitet | 15 lbs (6.8 kg) |
| Monteringstype | Attaches to TV Wall Mount |
| Særlige funktioner | Adjustable Height & Depth, Tool-Free Tension Adjustment |
| Varens vægt | 3.52 pund (1.6 kg) |
| Pakkedimensioner | 12.24 x 5.31 x 1.85 tommer (31.1 x 13.5 x 4.7 cm) |
| UPC | 793795537072 |
Garanti og support
SANUS products are designed and engineered in the U.S. and are backed by a commitment to quality and customer satisfaction.
Image: SANUS commitment to quality and customer support.
Garantioplysninger:
This SANUS Universal Soundbar TV Mount comes with a warranty. Please refer to the product packaging or the official SANUS website for specific warranty terms and conditions. SANUS has over 30 years of experience in designing premium products.
Kundesupport:
For any questions, assistance with installation, or troubleshooting, SANUS offers U.S.-based expert customer care available 7 days a week. Visit the official SANUS website or refer to the contact information provided in your product packaging for support details.
