Indledning
This manual provides detailed instructions for the setup, operation, and maintenance of your Sanyo VHS/DVD Combo Player. This versatile unit is designed to play a wide variety of media, including DVDs, CDs, and VHS tapes. It also features recording capabilities at five different speeds for up to six hours and 1080p HD upconversion for enhanced image quality. As an Amazon Renewed product, this unit has been professionally inspected and tested to ensure it functions and appears like new.

Figur 1: Forside view of the Sanyo VHS/DVD Combo Player in silver. The unit features a DVD tray on the left and a VHS slot on the right, with various control buttons and a display panel in the center.
1. Opsætning
1.1 Udpakning
Fjern forsigtigt alle komponenter fra emballagen. Sørg for, at følgende dele er til stede:
- Sanyo VHS/DVD Combo Player unit
- Fjernbetjening
- Strømkabel
- RCA Audio/Video Cables (typically red, white, and yellow connectors)
- HDMI Cable (if included with your specific renewed unit)
1.2 Tilslutning til et fjernsyn
To connect your Sanyo VHS/DVD Combo Player to your television, use either the RCA or HDMI connection:
- RCA-forbindelse: Connect the yellow video cable to the yellow video input on your TV, and the red and white audio cables to the corresponding red and white audio inputs on your TV.
- HDMI-forbindelse: Connect one end of the HDMI cable to the HDMI output on the player and the other end to an available HDMI input on your TV.
Ensure the player is connected to a power outlet using the provided power cable.
1.3 Indledende tænding
Tryk på MAGT button on the front of the unit or on the remote control. Select the appropriate input source on your television (e.g., AV1, HDMI1) to match the connection you used.
2. Betjeningsvejledning
2.1 Playing a VHS Tape
- Ensure the unit is powered on and your TV is set to the correct input.
- Insert a VHS tape into the VHS slot on the right side of the player. The unit should automatically load the tape.
- Tryk på SPIL button on the unit or remote control to begin playback.
- Brug REW (Spole tilbage), FFWD (Spol frem), STOP, og PAUSE buttons for tape control.
- To eject the tape, press the UDSTØDE knap.
2.2 Afspilning af en DVD/CD
- Ensure the unit is powered on and your TV is set to the correct input.
- Tryk på ÅBN/LUK button for the DVD tray (left side) to open it.
- Placer en DVD eller CD i diskbakken med etiketsiden opad.
- Tryk på ÅBN/LUK Tryk på knappen igen for at lukke skuffen. Enheden vil begynde at læse disken.
- Playback should start automatically. If not, press the SPIL knap.
- Brug FORR (Previous), NÆSTE, STOP, og PAUSE buttons for disc control.
- Tryk på for at skubbe disken ud ÅBN/LUK knap.
2.3 Recording (VHS)
The Sanyo VHS/DVD Combo Player supports recording onto VHS tapes. It can record in five different speeds for up to six hours. Refer to your television or cable/satellite box manual for specific instructions on connecting the player for recording purposes, typically via an auxiliary input.
- Insert a recordable VHS tape into the VHS slot.
- Select the desired input source for recording (e.g., TV channel, cable box output).
- Tryk på OPTAGE knappen for at starte optagelsen.
- Trykke STOP for at afslutte optagelsen.

Figure 2: Alternative front view of the Sanyo VHS/DVD Combo Player in black. This image highlights the distinct DVD tray and VHS tape slot, along with the various playback and recording controls.
3. Vedligeholdelse
To ensure optimal performance and longevity of your Sanyo VHS/DVD Combo Player, follow these maintenance guidelines:
- Rensning: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners or solvents. For the disc tray and VHS slot, use specialized cleaning kits if necessary, following their instructions carefully.
- Mediehåndtering: Always handle DVDs, CDs, and VHS tapes by their edges to prevent fingerprints and scratches. Store media in their protective cases when not in use.
- Ventilation: Ensure the unit has adequate ventilation. Do not block any ventilation openings on the top, sides, or rear of the player.
4. Fejlfinding
If you encounter issues with your Sanyo VHS/DVD Combo Player, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm | Power cable disconnected; power outlet not active. | Kontrollér strømkablets forbindelse; prøv en anden stikkontakt. |
| Intet billede/lyd | Incorrect TV input selected; A/V cables loose or damaged. | Select correct TV input; ensure cables are securely connected. |
| Disken afspilles ikke | Disc dirty or scratched; incorrect disc format. | Clean disc with a soft cloth; ensure disc is compatible (DVD-Video, CD-Audio). |
| VHS tape not playing/ejecting | Tape damaged; VCR mechanism issue. | Try a different tape; if issue persists, contact support. |
If these steps do not resolve the issue, please refer to the Support section.
5. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Sanyo |
| Modelnavn | Sanyo VHS/DVD Combo Player |
| Medietype | DVD, VHS |
| Speciel funktion | Compact design, 1080p HD upconversion (for DVD playback) |
| Opløsning | 720 x 576 pixels (native), 1080p upconversion |
| Connector Type | HDMI, RCA |
| Lydudgangstilstand | Stereo, Dolby Digital Stream Output |
| Varens vægt | 8.98 pund |
| Produktdimensioner | 19.5 cm L x 13 cm B x 6.3 cm H |
6. Garanti og support
This Sanyo VHS/DVD Combo Player is an Amazon Renewed product. Amazon Renewed products are eligible for replacement or refund under the Amazon Fornyet Garanti if you are not satisfied with your purchase. The return policy typically allows for returns within 90 days for refund or replacement.
For further assistance, troubleshooting, or warranty claims, please contact Amazon customer support or the Amazon Renewed supplier directly. Contact information can usually be found on your order details page on Amazon.com.





