Intex 64114E Dura-Beam Standard Prestige Queen luftmadras brugermanual

Vigtige sikkerhedsoplysninger

Please read and understand all instructions before using this product. Failure to follow these instructions may result in serious injury or product damage.

• Brug kun under kompetent tilsyn.
• Ikke egnet til børn under 36 måneder.
• Do not use in or around water. This is not a life-saving device.
• Pust ikke for meget op.
• Keep away from fire. RISK OF COMBUSTION: Do not place the airbed against or near any open flames, heaters, furnaces or other hot objects.
• Before inflation, make sure the manual valve is closed tightly by firmly pushing the flap into the bed.
• When air leakage occurs, check whether the manual valve is securely tightened first.

Pakkens indhold

Verify that all components are present before setup:

• 1 x Intex Dura-Beam Standard Prestige Queen Air Mattress with Built-in USB Electric Pump
• 1 x bæretaske
• Instruktionsmanual

Image: The Intex Dura-Beam Standard Prestige Queen Air Mattress, folded and stored in its carry bag.

Setup: Inflation and Deflation

1. Udpakning og placering

1. Remove the air mattress from its carry bag.
2. Unfold the mattress completely on a clean, level surface free from sharp objects.

Image: The Intex Dura-Beam Standard Prestige Queen Air Mattress unfolded inside a tent, ready for inflation.

2. Inflation using the Built-in USB Electric Pump

1. Locate the built-in USB electric pump on the side of the mattress.
2. Open the compartment cover to reveal the USB cable.
3. Connect the USB cable to a 5V USB-A power source (e.g., phone charger, 12V USB car charger, portable battery, or power outlet with a USB adapter). Ensure the power source is rated 2 Amp or higher for optimal performance.
4. Turn the pump's rotary switch clockwise to the "Inflate" position. The pump will begin to inflate the mattress.
5. Allow the mattress to inflate to your desired firmness. Approximate inflation time is 5.5 minutes.
6. Once inflated, turn the rotary switch back to the "Off" (center) position.
7. Disconnect the USB cable and store it neatly back in its compartment, closing the cover securely.

Billede: Nærbillede view of the built-in USB electric pump on the Intex air mattress, showing the inflate/deflate dial and USB port.

3. Deflation

1. Ensure the USB cable is disconnected and stored in its compartment.
2. Turn the pump's rotary switch counter-clockwise to the "Deflate" position. The pump will actively remove air from the mattress.
3. Allow the mattress to deflate completely.
4. Once deflated, turn the rotary switch back to the "Off" (center) position.
5. Fold the mattress neatly for storage in its carry bag.

Operating the Air Mattress

First Use and Material Stretching

During the first few inflations, the material of the air mattress will naturally stretch. This may cause a perceived loss of air pressure, which is normal and not a leak. Simply re-inflate the bed to your desired firmness. The material will fully settle within 2-3 nights of use, after which it should maintain its pressure more consistently.

Komfort og støtte

• Fiber-Tech bjælkekonstruktion: The mattress features thousands of high-strength polyester fibers for enhanced comfort, stability, and support. This construction helps the mattress maintain its shape and firmness.
• Fløjlsblød soveoverflade: The plush top surface is designed for comfort and helps prevent skin from sticking to the mattress, promoting a more comfortable sleep experience.
• 12-inch Bed Height: The mid-rise height of 12 inches makes it easier to get on and off the mattress compared to lower profile airbeds.

Opretholdelse

To clean the air mattress, simply wipe it with a damp cloth. Ensure the mattress is completely dry before folding and storing to prevent mildew.

Store the deflated and folded mattress in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.

Fejlfinding

Mattress Appears to Lose Air

• Material Stretching: As noted in the "Operating" section, the material will stretch during initial uses. This is normal. Re-inflate the mattress to your desired firmness. This stretching will reduce after 2-3 nights.
• Kontraventil: Ensure the manual valve is securely closed by firmly pushing the flap into the bed.
• Check Pump Dial: Verify the pump's rotary switch is in the "Off" (center) position.
• Undersøg for utætheder: If pressure loss persists after initial stretching and valve checks, inspect the mattress surface for any punctures or leaks. Small punctures can often be repaired with a patch kit (not included).

Specifikationer

Garanti og support

This Intex Dura-Beam Standard Prestige Air Mattress comes with a 90-day limited manufacturer's warranty.

For warranty claims, technical support, or further assistance, please contact Intex customer service directly. Refer to the product packaging or the official Intex webwebsted for kontaktoplysninger.