Indledning
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Nilox J1 PRO Folding Electric Bicycle. Please read this manual thoroughly before using your e-bike and retain it for future reference.
The Nilox J1 PRO combines the convenience of a folding bicycle with the power of an electric motor, offering an eco-friendly and dynamic urban commuting solution.
Billede: Side view of the Nilox J1 PRO folding electric bicycle, showcasing dens design med en kurv foran og en bagagebærer bagpå.
Pakkens indhold
Ved udpakning skal du kontrollere, at alle dele er til stede og ubeskadigede:
- Nilox J1 PRO eBike (90% assembled)
- Brugermanual
- Assembly Kit (tools for final assembly)
- Batterioplader
Opsætning og første samling
Your Nilox J1 PRO eBike is delivered approximately 90% assembled. The following steps detail the completion of the assembly process.
1. Unfolding the Bicycle
Carefully remove the e-bike from its packaging. Locate the main folding hinge on the frame. Release the safety latch and unfold the frame until it locks into place. Secure the latch firmly.
Billede: Nærbillede view of the e-bike's folding mechanism, showing the hinge and latch system on the frame.
2. Handlebar and Seatpost Adjustment
Adjust the handlebar stem and seatpost to your preferred riding height. Ensure all quick-release levers are securely tightened after adjustment. The handlebar stem also features a folding mechanism; ensure it is locked in the upright position.
3. Pedalmontering
Identify the left (L) and right (R) pedals. The left pedal typically has a reverse thread. Apply a small amount of grease to the threads and carefully screw each pedal into its respective crank arm. Tighten them firmly with a wrench from the assembly kit.
4. Batteriinstallation og første opladning
The battery is usually located on the rear rack. Ensure it is securely seated and locked into position. Before first use, fully charge the battery using the provided charger. Connect the charger to the battery port and then to a standard electrical outlet. The charging indicator on the charger will show the charging status.
Billede: Detaljeret view of the rear section of the e-bike, highlighting the rear wheel, electric motor hub, and the battery mounted on the rear rack.
5. Tjek før kørsel
Before your first ride, perform the following checks:
- Dæk: Ensure tires are inflated to the recommended pressure (check sidewall).
- Bremser: Test både for- og bagbremser for korrekt funktion og respons.
- Lys: Verify that the front and rear LED lights are working.
- Hurtige udløsninger: Confirm all quick-release levers (seatpost, handlebar) are securely fastened.
- Gear: If applicable, check that the 6-speed gear system shifts smoothly.
Betjeningsvejledning
The Nilox J1 PRO is designed for intuitive operation. Familiarize yourself with the controls before riding.
1. Tænd/sluk
To power on the e-bike's electrical system, press and hold the ON/OFF button on the handlebar control unit. Repeat to power off.
2. Pedalassistentsystem (PAS)
The e-bike features a pedal-assist system. Once powered on, begin pedaling, and the motor will provide assistance. Use the MODE button on the handlebar control unit to select different levels of assistance (Low, Medium, High). Higher assist levels provide more power and speed but consume battery faster.
Image: Close-up of the handlebar-mounted control unit, showing the ON/OFF button, light control, and pedal assist level indicators (Low, Med, High).
3. Lys
Press the LIGHT button on the control unit to turn the front and rear LED lights on or off for improved visibility.
4. Gearskift
The Nilox J1 PRO is equipped with a 6-speed gear change system. Use the gear shifter on the handlebar to select appropriate gears for different terrains and speeds. Shift smoothly to avoid strain on the drivetrain.
5. Bremsning
The e-bike uses V-brakes. Apply both front and rear brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.
6. Folding for Storage/Transport
To fold the e-bike, ensure it is powered off. Release the safety latch on the main frame hinge and fold the frame. Fold the handlebar stem down and collapse the pedals if they are foldable. This compacts the bike for easy storage or transport.
Opretholdelse
Regular maintenance ensures the longevity and safe operation of your Nilox J1 PRO eBike.
- Batteripleje:
- Oplad batteriet regelmæssigt, selvom det ikke er i brug, for at bevare dets sundhedstilstand.
- Undgå at aflade batteriet helt.
- Opbevar batteriet et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Dæktryk: Check tire pressure weekly and inflate to the recommended PSI (found on the tire sidewall).
- Bremser: Inspect brake pads for wear and replace them when necessary. Ensure brake cables are free from fraying and properly adjusted.
- Kæde: Hold kæden ren og smurt for at sikre jævne gearskift og forhindre slid.
- Fastgørelsesmidler: Kontrollér regelmæssigt alle bolte, møtrikker og hurtigkoblingsgreb for fastspænding.
- Rensning: Rengør elcyklen med reklameamp klud. Undgå at bruge højtryksrensere direkte på elektriske komponenter.
Fejlfinding
This section addresses common issues you might encounter with your Nilox J1 PRO eBike.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm til motoren | Battery discharged, battery not properly connected, power button not pressed. | Charge battery, ensure battery is securely seated, press and hold power button. |
| Motor assistance is weak or inconsistent | Low battery charge, incorrect assist level selected, sensor issue. | Recharge battery, select a higher assist level, check pedal assist sensor for obstructions. |
| Bremserne føles svampede eller ineffektive | Slidte bremseklodser, løst bremsekabel, luft i det hydrauliske system (hvis relevant). | Undersøg og udskift bremseklodser, juster bremsekablets spænding, og kontakt en fagmand ved problemer med hydrauliske bremser. |
| Lys virker ikke | Lights switched off, loose connection, low battery. | Press light button, check connections, charge battery. |
If you encounter issues not listed here or cannot resolve a problem, please contact Nilox customer support.
Specifikationer
Key technical specifications for the Nilox J1 PRO Folding Electric Bicycle:
| Feature | Detalje |
|---|---|
| Modelnummer | J1 PLUS |
| Motorkraft | 36V / 250W Brushless High Speed |
| Batteritype | 36V - 8Ah Lithium-ion (included) |
| Maksimal hastighed (assisteret) | Op til 25 km / h |
| Max Range (Assisted) | Op til 40 km |
| Opladningstid | Cirka 4 timer |
| Hjulstørrelse | 20 tommer |
| Rammemateriale | Stållegering |
| Bremse type | V-Brakes |
| Antal hastigheder | 1 (Note: Product title mentions 6-speed gear change, please refer to product packaging for exact gear configuration.) |
| Produktdimensioner (udfoldet) | 167 x 62 x 122 cm |
| Produktdimensioner (foldet) | 83 x 64 x 86 cm |
| Vægt | 18 kg (21 kg with battery) |
| Anbefalet alder | Voksne |
| Særlige funktioner | Front Basket, Rear Rack, Lightweight, Foldable, Portable, Rechargeable LED Lights |
Garanti og support
For warranty information, please refer to the documentation included with your purchase or visit the official Nilox webwebsted. Gem din købsbevis til garantikrav.
If you require technical assistance or have questions regarding your Nilox J1 PRO eBike, please contact Nilox customer support through their official channels. Contact details can typically be found on the Nilox webwebsted eller i produktemballagen.
