TM617 Digital tidsafbryder Brugermanual

1. Introduktion

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Figur 1: Forside view of the TM617 Digital Time Switch.

2. Sikkerhedsoplysninger

• Sørg for, at strømforsyningen er afbrudt før installation eller vedligeholdelse for at forhindre elektrisk stød.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Udsæt ikke enheden for fugt, ekstreme temperaturer eller ætsende miljøer.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Bekræft voltage rating of the device (110V/220V) matches your power supply before connection.

3. Produktfunktioner

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Manuel overstyringsfunktion.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Pakkens indhold

Kontroller venligst pakkens indhold ved åbning:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Brugermanual (dette dokument)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Opsætning og installation

5.1 Montering

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Ledningsdiagram

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Indgangseffekt: Connect the 110V/220V AC power supply to the designated input terminals.
• Belastningsudgang: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Betjeningsvejledning

6.1 Knapfunktioner

• P (Program): Enters or exits programming mode.
• D+ (Dag): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Time): Adjusts hour in setting mode; selects hour in program mode.
• M+ (Minut): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Tryk for at gå ind i tidsindstillingstilstand.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Indstilling af aktuel tid og dag

1. Tryk og hold på Urikon knap.
2. Mens du holder Urikon, tryk D+ to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. Mens du holder Urikon, tryk H+ for at indstille den aktuelle time.
4. Mens du holder Urikon, tryk M+ for at indstille det aktuelle minut.
5. Slip Urikon knappen for at gemme indstillingerne.

6.3 Programmering af tænd/sluk-cyklusser

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Tryk på P én gang. Displayet viser "1 ON".
2. Trykke D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Trykke H+ to set the hour for the first ON program.
4. Trykke M+ to set the minute for the first ON program.
5. Tryk på P knappen igen. Displayet vil vise "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Fortsæt med at trykke P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. Når du har indstillet alle de ønskede programmer, skal du trykke på Urikon knappen for at afslutte programmeringstilstanden og vende tilbage til visning af det aktuelle klokkeslæt.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Manuel tilsidesættelse

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Tryk på Manuel tilsidesættelse knap for at skifte mellem tilstande:
• PÅ: Output is continuously ON, ignoring programs.
• BIL: Output follows programmed ON/OFF cycles.
• OFF: Output is continuously OFF, ignoring programs.
• Vælge AUTO for normal operation based on your programmed schedule.

7. Vedligeholdelse

• Rengør apparatet regelmæssigt med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER webwebstedet eller se produktemballagen.