Indledning
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EMAX Transporter 2 5.8GHz FPV Goggles. Please read this manual thoroughly before using the product to ensure proper function and safety.
Pakkens indhold
Når du åbner pakken, skal du kontrollere, at alle komponenter er til stede:
- 1x EMAX Transporter 2 FPV Goggles
- 1x Micro USB-kabel
- 2x antenner
Image: EMAX Transporter 2 FPV Goggles, Micro USB cable, and two antennas, shown next to the product box.
Opsætning
1. Opladning af beskyttelsesbrillerne
The Transporter 2 Goggles have a built-in 1300mAh Lithium-ion battery. Before first use, fully charge the device.
- Connect the supplied Micro USB cable to the charging port on the goggles.
- Connect the other end of the USB cable to a 5V--1A USB power source (e.g., computer USB port, wall adapter).
- The charging indicator light will show the charging status. Refer to the device's LED indicators for full charge notification.
2. Montering af antenner
The goggles utilize two antennas for improved signal reception.
- Carefully screw the two included antennas onto the antenna connectors located on the top of the goggles.
- Ensure they are finger-tight to prevent signal loss.
Billede: Forside view of the EMAX Transporter 2 FPV Goggles with both antennas securely attached.
3. Detachable DVR Screen
The 4.3" LCD DVR screen is detachable, allowing for flexible use, including with a radio controller.
- To detach, gently slide the screen unit away from the main goggle body.
- To reattach, align the screen unit with the goggle body and slide it back into place until it clicks securely.
Image: The EMAX Transporter 2 FPV Goggles shown with its detachable DVR screen unit separated from the main goggle frame.
4. Justering af pasform
For optimal comfort and viewing, adjust the goggle strap and focal length.
- Use the 3-way adjustable belt to secure the goggles comfortably on your head.
- Adjust the focal length to achieve a clear image on the screen.
Billede: Side view of the EMAX Transporter 2 FPV Goggles, highlighting the adjustable head strap and ergonomic design.
Betjeningsvejledning
1. Tænd/sluk
- For at tænde skal du trykke på tænd/sluk-knappen og holde den nede, indtil skærmen lyser.
- For at slukke skal du trykke på tænd/sluk-knappen og holde den nede, indtil skærmen slukker.
2. Kanalvalg
The goggles operate on the 5.8GHz frequency band with 40 available channels.
- Use the channel selection buttons (refer to the goggle's button layout) to cycle through available frequencies.
- Ensure the goggle's channel matches the video transmitter's channel on your FPV drone for a clear signal.
3. Videotilstande
The DVR supports multiple video recording modes.
- Select between VGA, D1, and HD video modes based on your preference and storage needs.
- Access these settings through the goggle's menu system.
4. DVR-funktionalitet
The built-in DVR allows you to record your FPV flights.
- Insert a TF card (up to 32GB max) into the designated slot.
- Recordings are saved in MJPEG format as AVI files.
- Set recording duration (Off/3min/5min/10min) via the menu.
- Ensure the TF card is formatted correctly before use.
5. Kompatibilitet
The EMAX Transporter 2 Goggles are highly compatible with the E8 Radio Transmitter for an integrated FPV experience.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the goggle lenses and exterior. Avoid abrasive materials or harsh chemicals.
- Batteripleje: To prolong battery life, avoid fully discharging the battery frequently. Store the goggles with a partial charge (around 50%) if not used for extended periods.
- Opbevaring: Store the goggles in a cool, dry place, away from direct sunlight and extreme temperatures.
- Anti-fogging Fan: The built-in anti-fogging fan helps maintain clear vision. Ensure the fan intake/exhaust is not obstructed.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet billede på skærmen | Goggles not powered on; Low battery; Incorrect channel; Video transmitter off/malfunctioning. | Ensure goggles are charged and powered on. Verify channel matches transmitter. Check video transmitter status. |
| Poor image quality/static | Weak signal; Interference; Antennas loose/damaged; Incorrect focal length. | Move closer to drone. Check for sources of interference. Ensure antennas are secure. Adjust focal length. |
| DVR optager ikke | No TF card; TF card full/corrupted; Incorrect recording settings. | Insert TF card. Format or replace TF card. Check DVR recording settings. |
| Kort batterilevetid | Batteriet er ikke fuldt opladet; Batteriet er gammelt. | Ensure full charge before use. Battery degradation is normal over time. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | EMAX TRANSPORTER 2 GOGGLES |
| Skærmstørrelse | 4.3 tommer |
| Skærmopløsning | 480x800p |
| Frekvens | 5.8GHz (5658MHz-5945MHz), 40 Channels |
| Batteri | 1300mAh lithium-ion batteri |
| Working Voltage | 4.2V-3.7V |
| Opladningssystem | Built-in USB 5V--1A linear lithium-ion battery charging system |
| DVR | 32G TF card (max), MJPEG, AVI |
| Videotilstande | VGA/D1/HD (Off/3min/5min/10min) |
| Maximum Size (Without antenna - Folded) | 155x100x90 mm |
| Weight (With battery) | 398 g |
| Produktdimensioner | 7.25 x 5.75 x 4 tommer |
| Varens vægt | 1.45 pund |
| Kompatible enheder | E8 Radio Transmitter |
Garantioplysninger
EMAX products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period and terms for your Transporter 2 FPV Goggles, please refer to the warranty card included in your product packaging or visit the official EMAX webwebsted.
Kundesupport
For further assistance, technical support, or to inquire about replacement parts, please visit the official EMAX webwebstedet eller kontakt deres kundeserviceafdeling. Hav din købskvittering og produktets serienummer klar, når du kontakter support.
Official EMAX Webwebsted: www.emax-usa.com
