Indledning
The DYNASTY PROAUDIO PMC-2 is a high-quality, passive volume controller designed for studio monitoring applications. Its completely passive design ensures a transparent audio path, allowing for precise level control without introducing coloration or noise. Ideal for integrating between your audio interface and active monitor speakers, the PMC-2 provides intuitive control over your listening volume.
Sikkerhedsoplysninger
- Udsæt ikke enheden for regn eller fugt.
- Åbn ikke c'enasing. Der er ingen dele indeni, som kan serviceres af brugeren. Overlad al service til kvalificeret personale.
- Sørg for, at alle forbindelser er sikre, før du bruger enheden.
- Undgå at placere enheden i nærheden af varmekilder eller i direkte sollys.
- This device is passive and does not require a power supply for its core function.
Opsætning
The PMC-2 is designed for easy integration into your studio setup. As a passive device, it does not require an external power supply.
- Identify Inputs and Outputs: The rear panel of the PMC-2 features various input and output options.
- Indgange: Balanced Combo XLR / Phone Jack, RCA Audio Line, and Mini Jack TRS 3.5mm.
- Udgange: Balanced XLR, Phone Jack, and Mini Jack.
- Tilslut lydkilde: Connect your audio source (e.g., audio interface, PC sound card, or other analog signal sources) to the desired input on the PMC-2 using appropriate cables.
- Connect Monitor Speakers/Amplivligere: Connect the outputs of the PMC-2 to your active monitor speakers or amplifier using appropriate balanced XLR or Phone Jack cables.
- Indledende lydstyrkeindstilling: Before playing audio, ensure the large rotary volume control knob on the PMC-2 is set to its minimum position (fully counter-clockwise).
Drift
The PMC-2 offers straightforward operation for controlling your studio monitor volume.
- Lydstyrkekontrol: The large rotary knob on the top panel is the primary volume control. Rotate it clockwise to increase volume and counter-clockwise to decrease volume. This knob provides precise attenuation of the analog audio signal.
- Valg af input: Use the 'INPUT' button to toggle between the 'COMBO' (XLR/Phone Jack) and 'RCA/AUX' (RCA/Mini Jack) inputs.
- Outputvalg: Use the 'SELECT' button to toggle between 'XLR' and 'TRS/AUX' outputs.
- Mute-funktion: Press the 'MUTE' button to instantly silence the audio output. Press it again to unmute.
- Mono/stereo switch: The 'MONO/STEREO' switch allows you to switch the audio output between stereo and summed mono. This is useful for checking mixes for mono compatibility.
- DIM funktion: Press the 'DIM' button to reduce the output volume by a fixed amount (-20dB). This is useful for quickly lowering the volume without losing your main volume setting. Press it again to return to the original volume.
Opretholdelse
The DYNASTY PROAUDIO PMC-2 is built with a robust metal enclosure designed for durability and requires minimal maintenance.
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller aerosoler, da de kan beskadige overfladen eller de indvendige komponenter.
- Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Håndtering: While durable, avoid dropping the unit or subjecting it to excessive force, which could damage the internal circuitry or external controls.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang. | Mute button engaged; incorrect input/output selection; loose cables; source device not playing. | Check if the MUTE button is disengaged. Verify correct input and output selection. Ensure all audio cables are securely connected. Confirm audio is playing from the source device. |
| Lav eller forvrænget lyd. | DIM button engaged; volume knob too low; incorrect gain staging from source; faulty cables. | Check if the DIM button is disengaged. Increase the volume knob. Adjust output level from your audio source. Try different audio cables. |
| Audio only from one speaker. | Mono mode engaged; faulty cable; issue with source or speaker. | Ensure the MONO/STEREO switch is set to STEREO. Check the cable connections for both left and right channels. Test with different cables or swap speakers to isolate the issue. |
Specifikationer
- Model: PROAUDIO PMC 2
- Produktdimensioner: 3.6" D x 7.6" B x 2.2" H
- Varens vægt: 1.83 pund
- Materiale Type: Metal
- Kompatible enheder: PC (for audio routing)
- Konnektortyper: XLR, Phone Jack (1/4"), RCA, Mini Jack TRS (3.5mm)
- Funktioner: Passive Volume Control, Input Selection, Output Selection, Mute, Mono/Stereo Switch, DIM (-20dB)
- Strømbehov: Completely Passive (No external power supply required)
Garanti og support
DYNASTY PROAUDIO products are designed for reliability and performance. For warranty information and technical support, please refer to the official DYNASTY PROAUDIO webwebstedet eller kontakt din autoriserede forhandler. Gem din købsbevis i tilfælde af garantikrav.
For yderligere hjælp kan du besøge DYNASTY PROAUDIO Store on Amazon.
