Indledning
The NiteRider Lumina Pro 1200 is a high-performance, rechargeable front bike light designed for various cycling activities including mountain biking, road cycling, and commuting. It features 1200 lumens of output, a durable housing, and a USB-C charging port for convenience. This manual provides essential information for the proper setup, operation, and maintenance of your Lumina Pro 1200 light.
Sikkerhedsoplysninger
- Sørg altid for, at lygten er sikkert monteret, inden du kører.
- Do not look directly into the light beam when it is active, as it can cause temporary vision impairment.
- Hold lyset væk fra børn.
- The light can become warm during extended use; avoid direct contact with skin when operating at high settings.
- Ensure the USB-C port cover is properly sealed to maintain water resistance.
- The Lumina Pro 1200 is set to lock mode at the factory. Unlock before use to prevent accidental activation and potential overheating during transport or storage.
Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- NiteRider Lumina Pro 1200 LED Headlight
- Styr Clamp Monter
- USB-C ladekabel
Opsætning
Montering af lyset
- Fastgør styret clamp mount to your bicycle handlebar. Ensure it is positioned centrally and securely tightened to prevent movement during your ride.
- Slide the Lumina Pro 1200 light onto the mount until it clicks into place. Verify that the light is firmly seated.
- Adjust the angle of the light to illuminate the path ahead without blinding oncoming traffic or pedestrians.
Opladning
The Lumina Pro 1200 features a convenient USB-C charging port.
- Find USB-C-opladningsporten på lampen.
- Tilslut det medfølgende USB-C-kabel til lampen, og sæt den anden ende i en kompatibel USB-strømkilde (f.eks. computer, vægadapter).
- Batteriindikatoren viser opladningsstatus. En fuld opladning tager typisk cirka 4 timer.
- Once fully charged, disconnect the cable and ensure the USB-C port cover is securely closed to maintain water resistance.
Betjeningsvejledning
Tænd/sluk og valg af tilstand
- To turn the light ON, press and hold the power button for approximately 1-2 seconds.
- To cycle through light modes, press the power button briefly. The light features color-coded modes displayed through the power button switch.
- To turn the light OFF, press and hold the power button for approximately 1-2 seconds.
Lås mode
The Lumina Pro 1200 includes a Lock Mode, ideal for storage and transport to prevent accidental activation and conserve battery life.
- To engage Lock Mode: Press and hold the power button for 8-10 seconds. The light will flash to indicate it is locked.
- To disengage Lock Mode: Press and hold the power button for 8-10 seconds. The light will flash to indicate it is unlocked and ready for use.
- Vigtig: The Lumina Pro 1200 is factory-set to Lock Mode. Unlock it before initial use.
Batteriniveauindikator
The integrated 8-step fuel gauge displays the current battery power levels, allowing you to monitor remaining charge.
Lystilstande og driftstider
The Lumina Pro 1200 offers multiple light modes to suit various riding conditions, with typical run times ranging from 55 minutes to 20 hours depending on the selected mode and brightness level.
The light is designed to meet FL1 Standards for lumen output, run times, and dust/water resistance.
Opretholdelse
- Rensning: Wipe the light housing with a soft, damp klæde. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
- Linsepleje: Keep the lens clean for optimal light output. Use a soft cloth to gently clean the lens.
- Opbevaring: When storing the light for extended periods, ensure it is fully charged and activate Lock Mode. Store in a cool, dry place. Recharge the battery every 3-6 months to maintain battery health.
- Vandtæthed: The light has an International Protection Rating of IP64, indicating resistance to dust and splashing water. Do not submerge the light in water. Ensure the USB-C port cover is always sealed when not charging.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Light is in Lock Mode or battery is depleted. | Disengage Lock Mode by holding the power button for 8-10 seconds. Charge the battery fully. |
| Shortened run time. | Battery not fully charged or operating in a high-power mode. | Ensure the battery is fully charged. Select a lower power mode for extended run times. Battery performance can be affected by cold temperatures. |
| Lyset flimrer eller slukker uventet. | Lavt batteri eller løs forbindelse. | Genoplad batteriet. Sørg for, at lygten er sikkert monteret, og at forbindelserne er i orden. |
Specifikationer
| Feature | Detalje |
|---|---|
| Lysstyrke | 1200 lumen |
| Strømkilde | Batteridrevet (genopladeligt) |
| Opladningsport | USB-C |
| Opladningstid | Cirka 4 timer |
| Varens vægt | 193 gram |
| Materiale | DuPont Fiberglass reinforced nylon housing |
| Vandmodstandsniveau | Vandtæt (IP64) |
| Monteringstype | Handlebar Mount (also helmet mountable option) |
| Antal indstillinger | 8 |
| Modelnummer | 6851 |
Garanti og support
Garantioplysninger
- Begrænset livstidsgaranti: Covers defects in mechanical components (housings, covers, mounts, fasteners) and LEDs.
- 2-års garanti: Applies to printed circuit boards, switches, and AC adapters.
- 1-års garanti: Dækker genopladelige battericeller.
For warranty claims or technical support, please refer to the official NiteRider webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis for at validere garantien.
