1. Vigtige sikkerhedsoplysninger
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other injuries which could be hazardous or fatal.
- Afbryd strømmen: Afbryd altid strømmen ved hovedafbryderen eller sikringsboksen, før installation eller vedligeholdelse påbegyndes.
- Uddannet elektriker: If you are unsure about the installation process, consult a qualified, licensed electrician.
- Ledningsføring: Sørg for, at alle elektriske forbindelser overholder lokale forskrifter og bestemmelser samt den nationale elektriske kode (NEC).
- Vådklassificeret: This light kit is wet rated and suitable for outdoor use, such as on porches or patios. Ensure all connections are properly sealed for outdoor environments.
- Pære Wattage: Overskrid ikke det maksimale wattage specified for the light kit.
- Sikker montering: Ensure the ceiling fan to which this light kit is attached is securely mounted and capable of supporting the additional weight.
2. Pakkens indhold
Kontroller, at alle komponenter er til stede, før du fortsætter installationen.
- 1x 3-Light Ceiling Fan Light Kit Housing (White finish)
- 3x Alabaster Glass Shades
- 3x 6.5 Watt Medium Base Bulbs
- Mounting Hardware (typically included with the light kit for attachment to a fan)

Image 1: HARBOR BREEZE 3-Light White Ceiling Fan Light Kit. This image displays the complete light kit assembly, featuring a white central housing, three downward-facing light sockets, each fitted with an alabaster glass shade. A metallic pull chain for operation is visible extending from the center of the housing.
3. Opsætning og installation
This light kit is designed for universal compatibility with most HARBOR BREEZE ceiling fans. Refer to your specific ceiling fan's instruction manual for detailed wiring and mounting procedures if necessary.
- Forbered til installation:
- Ensure power to the ceiling fan circuit is turned OFF at the main breaker.
- Saml de nødvendige værktøjer: skruetrækker, afisoleringstang, elektrikertape.
- Remove Existing Light Kit (if applicable):
- Carefully disconnect any existing light kit from the ceiling fan by unscrewing mounting screws and detaching electrical wires.
- Tilslut ledninger:
- Identify the light kit wires (typically white for neutral, black for hot, and green/bare copper for ground).
- Connect the light kit's white wire to the fan's white (neutral) wire.
- Connect the light kit's black wire to the fan's black (hot) wire for the light function.
- Connect the light kit's ground wire to the fan's ground wire.
- Fastgør alle forbindelser med ledningsmøtrikker og elektrisk tape.
- Attach Light Kit to Fan:
- Align the light kit with the mounting holes on the bottom of the ceiling fan motor housing.
- Secure the light kit using the provided mounting screws. Do not overtighten.
- Install Bulbs and Shades:
- Carefully screw the three 6.5 watt medium base bulbs into the light kit sockets.
- Attach the alabaster glass shades by aligning them with the shade holders and securing them according to the fan's design (e.g., by twisting or using retention screws).
- Gendan strøm:
- Once installation is complete, restore power at the main circuit breaker.
- Test the light kit for proper operation.
4. Betjeningsvejledning
The HARBOR BREEZE 3-Light Ceiling Fan Light Kit can be operated via its integrated pull chain or, if your ceiling fan supports it, through a compatible remote control system.
- Trækkædeoperation: Gently pull the metallic chain extending from the center of the light kit to cycle through the light settings (e.g., On/Off).
- Remote Control Operation (if applicable): If your ceiling fan is equipped with a remote control that includes light functions, use the designated light button(s) on the remote to control the light kit. Ensure the pull chain is set to the "On" position for remote control functionality.
5. Vedligeholdelse
Regular maintenance ensures optimal performance and longevity of your light kit.
- Rensning:
- Before cleaning, ensure power is disconnected at the circuit breaker.
- Wipe the light kit housing and glass shades with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller glasset.
- Allow all parts to dry completely before restoring power.
- Udskiftning af pære:
- Ensure power is disconnected at the circuit breaker and bulbs are cool to the touch.
- Skru forsigtigt den gamle pære ud af fatningen.
- Screw in a new medium base bulb (E26/E27) of the same type and wattage (max 6.5 watts, or equivalent LED/CFL).
- Gendan strømmen og test.
6. Fejlfinding
If you experience issues with your light kit, refer to the following common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. |
|
|
| Lysene flimrer eller dæmpes. |
|
|
| Light kit does not respond to remote control. |
|
|
7. Specifikationer
| Mærke | HAVNEBRIS |
| Modelnavn | 3-Light Ceiling Fan Light Kit |
| Indendørs/Udendørs brug | Outdoor (Wet Rated) |
| Antal lys | 3 |
| Lyskildetype | Fluorescent, Halogen, LED (Medium Base) |
| Medfølgende pærer | 3x 6.5 Watt Medium Base Bulbs |
| Skærmmateriale | Alabast glas |
| Skygge farve | Hvid |
| Kontrolmetode | Pull Chain (Remote compatible with certain fans) |
| Strømkilde | Elektrisk med ledning |
| Varens vægt | 2.7 pund |
| Pakkedimensioner | 13.5 x 6 x 5.25 tommer |
| UPC | 080629263529 |
| ASIN | B09RG621C6 |
8. Garanti og support
For warranty information or technical support, please contact HARBOR BREEZE customer service. Keep your purchase receipt as proof of purchase.
Contact details are typically found on the product packaging or the official HARBOR BREEZE webwebsted.





