Indledning
The VOOPOO Drag 3 Kit is a high-performance sub-ohm vaping device designed for an enhanced vapor production experience. It combines a powerful mod with the innovative TPP Pod Tank, offering versatility and ease of use. This manual provides essential information on how to set up, operate, maintain, and troubleshoot your Drag 3 Kit to ensure safe and optimal performance.

Image: VOOPOO Drag 3 Kit Marsala. This image displays the complete device, featuring the main mod unit with its distinctive Marsala red leather grip and the TPP Pod Tank securely mounted on top. The screen on the side of the mod is visible, indicating power settings.
Sikkerhedsoplysninger
Please read all safety warnings carefully before using this product. Improper use can result in fire, injury, or property damage.
- This product is intended for adult smokers and vapers only. Keep out of reach of children and pets.
- Do not use damaged batteries or chargers. Use only external 18650 batteries (not included) that are in good condition and suitable for high-drain devices.
- Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller vand.
- Always turn off the device when not in use or when carrying it in a pocket or bag.
- Sørg for ordentlig ventilation ved opladning af batterier.
- Undlad at overoplade eller overaflade batterier.
- Bortskaf batterier og elektronisk affald ansvarligt i henhold til lokale regler.
- This product contains no nicotine.
Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1 x VOOPOO Drag 3 177W Vape Device
- 1 x TPP 2ml Pod Tank
- TPP Coils (specific types and quantities may vary by kit version)
- 1 x USB ladekabel
- 1 x brugermanual
Produkt overview
The VOOPOO Drag 3 Kit consists of two main parts: the Drag 3 Mod and the TPP Pod Tank.
- Drag 3 Mod: This is the main power unit, housing the GENE FAN 2.0 chip, battery compartment for dual 18650 batteries, a display screen, and control buttons. It features a durable zinc alloy and leather construction.
- TPP Pod Tank: A 2ml capacity tank designed for TPP coils, featuring a magnetic connection to the mod and adjustable bottom airflow. It combines the convenience of a pod with the performance of a sub-ohm tank.
Opsætning
1. Batteriinstallation
- Open the battery door located at the bottom of the Drag 3 Mod.
- Insert two 18650 batteries (not included) according to the polarity indicators (+/-) inside the battery compartment.
- Luk batteridækslet forsvarligt.
2. Spoleinstallation
- Remove the TPP Pod Tank from the mod.
- Flip the tank upside down.
- Push the desired TPP coil firmly into the coil slot at the bottom of the tank. Ensure it is seated correctly.
3. Påfyldning af e-væske
- Locate the silicone plug at the bottom of the TPP Pod Tank.
- Lift the plug to reveal the filling port.
- Carefully fill the tank with your preferred e-liquid (up to 2ml capacity). Avoid overfilling.
- Luk silikoneproppen forsvarligt.
4. Priming the Coil
After filling, let the tank stand for at least 5-10 minutes to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.
5. Attach Tank to Mod
Place the filled TPP Pod Tank onto the Drag 3 Mod. It will be held in place by strong magnets.
Betjeningsvejledning
Tænd/sluk
- Tryk hurtigt på brandknappen 5 gange for at tænde eller slukke enheden.
Justering af Wattage
- Once powered on, use the '+' and '-' adjustment buttons to increase or decrease the wattage. The recommended wattage range for your installed coil will be displayed or can be found on the coil itself.
Valg af tilstand
The Drag 3 features multiple modes:
- Smart Mode: Automatically detects the installed PnP or TPP coil and sets an appropriate wattage, preventing accidental coil burnout.
- Super tilstand: Activates with low-resistance coils, increasing firing speed for enhanced vapor production.
- RBA-tilstand: Allows full manual control over wattage for advanced users.
- Temperature Control (TC) Mode: For use with specific coil materials (e.g., Ni, Ti, SS). (Note: This mode might require a firmware update or specific settings, refer to the official VOOPOO website for detailed TC instructions if needed).
To switch modes, press the fire button 3 times rapidly.
Vaping
- Tryk og hold affyringsknappen nede, mens du inhalerer fra mundstykket. Slip knappen, når du er færdig med at inhalere.
Opladning
- Connect the USB charging cable to the charging port on the device and then to a suitable USB power source.
- The screen will display charging status. It is recommended to charge batteries externally for optimal battery life and safety, though the device supports internal charging.
Justering af luftstrøm
- Rotate the TPP Pod Tank on the mod to adjust the airflow. This allows you to customize your draw from a tighter to a looser inhale.
Opretholdelse
Rengøring af tanken
- Regularly clean the TPP Pod Tank, especially when changing e-liquid flavors or coils.
- Remove the coil and rinse the tank with warm water. Allow it to air dry completely before reassembling. Do not use harsh chemicals.
Replacing Coils
- Coils should be replaced when you notice a burnt taste, reduced vapor production, or diminished flavor.
- Follow the coil installation steps in the "Setup" section.
Rengøring af enhed
- Wipe the mod with a dry or slightly damp cloth to remove any e-liquid residue or dust.
- Keep the 510 connection and battery contacts clean to ensure good conductivity.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | Lavt batteri; Forkert batteriinstallation; Enhed slukket | Charge batteries; Reinstall batteries correctly; Press fire button 5 times rapidly to turn on |
| "No Atomizer" / "Check Atomizer" message | Tank not connected; Coil not installed; Faulty coil | Ensure tank is seated correctly; Install coil; Replace coil |
| Brændt smag | Coil not primed; Coil needs replacement; Low e-liquid | Allow coil to saturate; Replace coil; Refill tank |
| Utætte | Coil not seated correctly; Damaged seals; Overfilling | Re-seat coil; Check O-rings; Do not overfill |
| Weak vapor / flavor | Lav wattage; Worn coil; Low battery | Øg watttage; Replace coil; Charge batteries |
Specifikationer
- Mærke: VOOPOO
- Model: Drag 3 Kit Marsala
- Output Wattage: 5-177W
- Batteri: Dual 18650 (not included)
- Chipsæt: GENE.FAN 2.0
- Tank kapacitet: 2ml (TPP Pod Tank)
- Spole kompatibilitet: TPP Coils (and PnP Coils with PnP Pod Tank, sold separately)
- Dimensioner: Approximately 25 x 50 x 120 mm (L x W x H)
- Materiale: Zinc Alloy, Leather
Garanti og support
VOOPOO products typically come with a limited warranty. Please refer to the warranty card included in your original packaging or visit the official VOOPOO webhjemmeside for detaljerede garantivilkår.
For technical support, troubleshooting beyond this manual, or warranty claims, please contact VOOPOO customer service or your authorized retailer.
Officiel Webwebsted: www.voopoo.com





