3nStar RPT006 ​​Termisk kvitteringsprinter Brugermanual (USB+ETH+WiFi)

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the 3nStar RPT006 Thermal Receipt Printer, specifically the USB+Ethernet+Wi-Fi model. Please read this manual thoroughly before using the printer to ensure proper functionality and to prevent damage.

2. Sikkerhedsoplysninger

• Sørg for, at printeren er tilsluttet en jordet stikkontakt.
• Udsæt ikke printeren for vand eller for høj luftfugtighed.
• Undgå at placere printeren i direkte sollys eller i nærheden af ​​varmekilder.
• Brug kun den strømadapter, der følger med printeren.
• Do not attempt to disassemble or repair the printer yourself. Contact qualified service personnel.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 3nStar RPT006 termisk kvitteringsprinter
• Strømledning
• AC Adapter
• USB kabel
• USB Type-C til Type-A-adapter
• Sample Roll of Thermal Paper
• USB Drive (containing Drivers, Manuals, and Tutorials)

4. Produktet er slutview

Familiarize yourself with the printer's components and indicators.

4.1 Foran View

Figur 1: Front view of the 3nStar RPT006 printer, showing the paper output slot and control panel with FEED, PAPER, ERROR, and POWER indicators.

4.2 Top Angled View

Figur 2: Vinklet top-front view of the 3nStar RPT006 printer, highlighting the compact design and control panel.

4.3 Side View

Figur 3: Side view of the 3nStar RPT006 printer, illustrating its compact form factor.

4.4 Rear Angled View

Figur 4: Angled rear-top view of the 3nStar RPT006 printer, showing the power switch and connectivity ports (not clearly visible but implied location).

4.5 Kontrolpanelindikatorer

• FEED knap: Press to advance paper.
• PAPER Indicator: Lights up when paper is present, flashes when paper is low, off when no paper.
• FEJL-indikator: Lights up or flashes to indicate various errors (e.g., paper jam, print head overheat).
• POWER-indikator: Lights up when the printer is powered on.

5. Opsætning

5.1 Udpakning og placering

1. Tag forsigtigt printeren og alt tilbehør ud af emballagen.
2. Place the printer on a stable, flat surface. Ensure adequate ventilation around the printer.

5.2 Tilslutning af strøm

1. Connect the AC adapter to the printer's power input port.
2. Tilslut netledningen til lysnetadapteren.
3. Sæt netledningen i en jordet stikkontakt.
4. Ensure the printer's power switch (located at the rear/side) is in the OFF position before connecting power.

5.3 Ilægning af termopapir

Figur 5: Printer with the top cover open, illustrating the drop-in paper loading area.

1. Open the printer's top cover by pressing the cover release latch (if present) or lifting the cover directly.
2. Insert a new roll of 80mm thermal paper into the paper compartment. Ensure the paper feeds from the bottom of the roll and the leading edge is straight.
3. Pull a small amount of paper past the cutter mechanism.
4. Close the top cover firmly until it latches. The printer will automatically feed the paper to the correct position.

5.4 Interface Connections (USB, Ethernet, Wi-Fi)

The RPT006 (USB+ETH+WiFi) model offers multiple connectivity options:

• USB-forbindelse: Connect the provided USB cable from the printer's USB port to an available USB port on your computer or POS terminal.
• Ethernet-forbindelse (LAN): Connect a standard Ethernet cable from the printer's Ethernet port to your network router or switch.
• Wi-Fi-forbindelse: For Wi-Fi setup, refer to the detailed instructions on the included USB drive or the manufacturer's website for specific configuration steps, as this typically involves utility software.

6. Betjeningsvejledning

6.1 Tænd/sluk

• Tænd: Flip the power switch (usually located at the rear or side) to the ON position. The POWER indicator light will illuminate.
• Sluk: Flip the power switch to the OFF position. The POWER indicator light will turn off.

6.2 Driverinstallation

Drivers are required for the printer to communicate with your operating system (Windows, Linux, OPOS). The necessary drivers are provided on the included USB drive.

1. Insert the USB drive into your computer.
2. Locate and run the appropriate driver installer for your operating system.
3. Følg instruktionerne på skærmen for at fuldføre driverinstallationen.
4. For Wi-Fi configuration, refer to the specific utility software provided on the USB drive.

6.3 Printing a Test Page

After driver installation, you can print a test page to confirm proper setup:

• For Windows: Go to "Devices and Printers," right-click on the 3nStar RPT006 printer, select "Printer properties," and then click "Print Test Page."
• Alternatively, you can often print a self-test page by holding down the FEED button while turning on the printer (consult the USB drive manual for exact procedure).

7. Vedligeholdelse

7.1 Rengøring af printeren

• Sluk printeren, og tag netledningen ud, inden du rengør den.
• Brug en blød, tør klud til at tørre printerens yderside af.
• For at rengøre det termiske printhoved skal du bruge en vatpind letampened with isopropyl alcohol. Gently wipe the print head surface. Allow it to dry completely before powering on.
• Regularly remove paper dust and debris from the paper path.

7.2 Papirudskiftning

When the PAPER indicator flashes or no paper is detected, replace the thermal paper roll as described in Section 5.3.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the documentation provided on the included USB drive or visit the official 3nStar webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.