1. Introduktion
Thank you for choosing the EDOSTORY 80 Quart Rolling Ice Chest Cooler Cart. This versatile cooler is designed to keep your beverages and food chilled for extended periods, making it ideal for patio gatherings, backyard parties, and other outdoor leisure occasions. Its robust construction and convenient features ensure a reliable and enjoyable experience.
Figure 1.1: EDOSTORY 80 Quart Rolling Ice Chest Cooler Cart (Rattan)
2. Sikkerhedsoplysninger
Læs og forstå alle sikkerhedsinstruktioner, før du samler eller bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i personskade eller beskadigelse af produktet.
- Do not allow children to climb on or play with the cooler cart.
- Ensure the cooler is placed on a stable, level surface to prevent tipping.
- Always engage the wheel locks when the cooler is stationary to prevent unintended movement.
- Overbelast ikke køleren ud over den angivne kapacitet.
- Exercise caution when draining melted ice water to avoid slips or spills.
- Keep the cooler away from open flames or excessive heat sources.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:
- Cooler Body (1)
- Support Frame/Legs (1 set)
- Nederste hylde (1)
- Wheels (4) - 2 with locks, 2 without
- Fold-back Lids (2)
- Built-in Bottle Opener (1)
- Bottle Cap Catcher (1)
- Isske (1)
- Drain Plug (pre-installed)
- Assembly Hardware (screws, washers, nuts, wrench)
4. Opsætning og montering
Assembly typically requires minimal tools and can be completed by one person. Follow these steps:
- Pak forsigtigt alle komponenter ud, og kontroller dem med pakkens indholdsliste.
- Attach the support frame/legs to the cooler body using the provided hardware. Ensure all screws are tightened securely.
- Install the bottom shelf onto the lower part of the support frame.
- Attach the four wheels to the bottom of the legs. It is recommended to place the two wheels with locks on the same side for easier locking.
- Place the two fold-back lids onto the top of the cooler body.
- Ensure the built-in bottle opener and cap catcher are securely attached to the side of the cooler.
Figure 4.1: Cooler Cart Dimensions and Assembly Overview
Figure 4.2: Mobile Cart with Locking Casters
5. Betjeningsvejledning
5.1 Filling the Cooler
Open the two fold-back lids to access the cooler interior. Fill the cooler with ice and your desired beverages or food items. The 80-quart (20-gallon) capacity can accommodate over 100 cans or 55 bottles.
Figure 5.1: Cooler Filled with Beverages and Ice
5.2 Maintaining Temperature
The cooler is designed to keep contents cool for up to 14 hours and warm for up to 8 hours, with a temperature difference of less than 10℃ over 8 hours. For optimal performance, ensure both lids are securely closed when not in use.
5.3 Using the Bottle Opener and Ice Scoop
Utilize the built-in bottle opener on the side of the cooler for convenience. Bottle caps will fall into the attached cap catcher for easy disposal. The included ice scoop can be used to serve ice or retrieve items from the cooler.
Figure 5.2: Using the Built-in Bottle Opener
Figure 5.3: Ice Scoop Dimensions
5.4 Mobilitet
The four multi-directional rolling wheels allow for easy transportation. Engage the wheel locks when the cooler is in its desired position to prevent accidental movement.
6. Vedligeholdelse
6.1 Rengøring
After each use, drain any melted ice water through the integrated drain plug located at the bottom of the cooler. Clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry completely before storage to prevent mold or mildew growth.
Figure 6.1: Drain Plug Location
6.2 Opbevaring
Store the cooler cart in a cool, dry place when not in use. If storing outdoors, consider using a protective cover to shield it from the elements.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Cooler is leaking. | Drain plug not fully sealed or damaged. | Ensure drain plug is tightly closed. Inspect plug for damage and replace if necessary. |
| Contents not staying cold. | Lids not properly closed or insufficient ice. | Ensure both lids are fully closed. Add more ice for prolonged cooling. Pre-chill cooler before use. |
| Hjulene ruller ikke jævnt. | Debris in wheels or wheel locks engaged. | Check for and remove any debris from the wheels. Ensure wheel locks are disengaged. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | EDOSTORY |
| Model | 80 Quart Rolling Ice Chest Cooler Cart (Rattan) |
| Kapacitet | 80 Quarts / 20 Gallons (approx. 100+ cans or 55+ bottles) |
| Produktmål (L x B x H) | 31" x 15" x 33.5" (78.7 cm x 38.1 cm x 85.1 cm) |
| Varens vægt | 16.03 kilogram (ca. 35.34 lbs) |
| Udvendigt materiale | Alloy Steel (Rattan finish) |
| Indvendigt materiale | PP lined injection-foam-unitized |
| Isoleringsmateriale | Polyurethan |
| Kølende ydeevne | Keeps cool for 14 hrs, warm for 8 hrs (temp difference < 10℃ in 8 hrs) |
| Særlige funktioner | 4 Multi-directional Rolling Wheels (2 with locks), Built-in Bottle Opener, Bottle Cap Catcher, Ice Scoop, 2 Fold-back Lids, Drain Plug |
9. Garanti og support
EDOSTORY products are manufactured to high-quality standards. For any questions, concerns, or warranty claims, please contact EDOSTORY customer support through the retailer's platform or the official brand webwebsted. Gem venligst din købsbevis af garantihensyn.
