NCM Milano Plus elektrisk bycykel brugermanual

1. Introduktion

Welcome to the NCM Milano Plus Electric City Bike user manual. This manual provides essential information for the safe operation, maintenance, and care of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure proper assembly, safe usage, and to maximize the lifespan of your bike.

The NCM Milano Plus is designed as a versatile electric city bike, featuring a powerful 500W hub motor, a large capacity 48V 16Ah removable lithium battery, hydraulic disc brakes, and an 8-speed gear system. It offers a comfortable and efficient riding experience for urban commuting and leisure.

2. Sikkerhedsinstruktioner

Din sikkerhed er altafgørende. Brug altid hjelm og passende sikkerhedsudstyr, når du kører. Overhold alle lokale færdselslove og -regler.

2.1 Generel sikkerhed

• Always perform a pre-ride inspection, checking brakes, tires, and battery security.
• Rid ikke under påvirkning af alkohol eller stoffer.
• Vær opmærksom på dine omgivelser og foregribe potentielle farer.
• Ensure all bolts and quick releases are properly tightened before each ride.

2.2 Batterisikkerhed

• Only use the charger supplied with your NCM Milano Plus.
• Udsæt ikke batteriet for ekstreme temperaturer eller direkte sollys i længere perioder.
• Forsøg ikke at åbne eller ændre batteripakken.
• Oplad batteriet i et godt ventileret område, væk fra brandfarlige materialer.

2.3 Bremsningssikkerhed

• Your bike is equipped with hydraulic disc brakes. Familiarize yourself with their stopping power.
• Apply both front and rear brakes simultaneously for optimal stopping and control.
• Braking distance may increase in wet or slippery conditions.

3. Komponenter overview

The NCM Milano Plus features a robust design with key electric and mechanical components integrated for performance and reliability.

Figur 3.1: Forside view of the NCM Milano Plus Electric City Bike, showcasing the frame, wheels, handlebars, and integrated battery.

Figur 3.2: Vinklet view of the NCM Milano Plus, highlighting the step-through frame design and rear rack.

Figur 3.3: Side view of the NCM Milano Plus, showing the battery compartment, motor, and disc brakes.

Nøglekomponenter:

• Ramme: Aluminum step-through frame for easy mounting and dismounting.
• Motor: 500W powerful hub motor, located in the rear wheel.
• Batteri: Removable 48V 16Ah (768Wh) Lithium-ion battery, integrated into the downtube.
• Vise: LCD display (standard for e-bikes, assumed) showing speed, battery level, assist level, and distance.
• Bremser: Hydraulic disc brakes for reliable stopping power.
• Gear: 8-trins gearsystem til varieret terræn.
• Affjedring: Front suspension fork for a smoother ride.
• Dæk: 27.5-inch wheels with 1.75" - 2.0" wide tires.

4. Opsætning og montering

Your NCM Milano Plus electric bike may require some minor assembly upon arrival. Follow these steps carefully.

4.1 Udpakning

• Tag forsigtigt cyklen og alle komponenter ud af emballagen.
• Gem emballagen til senere transport eller opbevaring.
• Kontroller indholdet mod pakkelisten for at sikre, at alle dele er til stede.

4.2 Grundlæggende samling

Typical assembly steps include:

1. Montering af styr: Fastgør styret til frempinden, og sørg for, at det er centreret og spændt godt fast.
2. Pedal installation: Identify left (L) and right (R) pedals. Thread them carefully into the crank arms. The left pedal threads counter-clockwise, and the right pedal threads clockwise. Tighten firmly.
3. Montering af forhjul: If detached, install the front wheel, ensuring it is properly seated in the fork dropouts and the quick release or axle nuts are tightened securely.
4. Sadelpind og sadel: Insert the seat post into the frame and adjust the saddle height for comfortable pedaling, ensuring the minimum insertion mark is not visible. Tighten the quick release or bolt.

4.3 Opladning og installation af batteri

• Before first use, fully charge the battery. Connect the charger to the battery and then to a power outlet. The indicator light on the charger will change when fully charged.
• To install the battery, slide it into the frame's downtube compartment until it clicks securely into place. Use the key to lock it if applicable.
• To remove, unlock the battery with the key and slide it out.

4.4 Tjek før kørsel

• Dæk: Check tire pressure. Recommended pressure is typically found on the tire sidewall.
• Bremser: Sørg for, at både for- og bagbremserne er aktivert ordentligt og slippet helt.
• Quick Releases/Bolts: Verify all quick releases and bolts (wheels, seat post, handlebars) are securely tightened.
• Batteri: Confirm the battery is securely seated and locked.

5. Betjening af din elcykel

Understanding the controls and functions of your NCM Milano Plus will enhance your riding experience.

5.1 Tænd/sluk

• To power on the e-bike system, press and hold the power button on the display unit (or battery, depending on model).
• For at slukke skal du trykke på tænd/sluk-knappen igen, indtil skærmen slukker.

5.2 Pedal Assist System (PAS)

• The NCM Milano Plus uses a Pedal Assist System (PAS), meaning the motor provides assistance only when you are pedaling.
• Use the '+' and '-' buttons on the control panel to adjust the level of pedal assistance. Higher levels provide more motor power.
• Start in a lower assist level until you are comfortable with the bike's acceleration.

5.3 Gearskift

• Your bike is equipped with an 8-speed gear system. Use the shifter on the handlebar to change gears.
• Skift til et lavere gear for at køre op ad bakker og et højere gear for at køre ned ad bakke eller fladt terræn.
• Træd altid let i pedalerne, når du skifter gear, for at sikre jævne gearskift og forhindre skader på drivlinjen.

5.4 Displayfunktioner

While specific display features may vary, common functions include:

• Nuværende hastighed
• Batteriopladningsniveau
• Pedalhjælpsniveau (PAS)
• Rejseafstand / Kilometertæller
• Headlight/Taillight control (if integrated)

6. Vedligeholdelse

Regular maintenance will ensure the longevity and optimal performance of your NCM Milano Plus.

6.1 Rengøring

• Rengør din cykel regelmæssigt med reklameamp cloth and mild soap. Avoid high-pressure washers, especially near electrical components.
• Tør cyklen grundigt efter rengøring.

6.2 Dækpleje

• Maintain correct tire pressure as indicated on the tire sidewall.
• Inspect tires for wear, cuts, or embedded objects regularly.

6.3 Bremsesystem

• Kontroller bremseklodserne for slid, og udskift dem, når det er nødvendigt.
• Ensure brake levers are firm and responsive. If they feel spongy, the hydraulic system may need bleeding by a professional.
• Keep disc rotors clean and free of oil or grease.

6.4 Drivlinje (kæde og gear)

• Keep the chain clean and lubricated with bicycle-specific chain lubricant.
• Inspect gears and derailleur for proper alignment and wear. Adjustments may be needed periodically.

6.5 Batteripleje og -opbevaring

• Charge the battery regularly, even if not using the bike frequently. Do not let it fully discharge for extended periods.
• Opbevar batteriet et køligt og tørt sted, ideelt set mellem 10 °C og 20 °C (50 °F og 68 °F).
• If storing for a long time, charge the battery to 50-70% capacity every 2-3 months.

7. Fejlfinding

This section addresses common issues you might encounter with your NCM Milano Plus.

If you encounter issues not listed here or require further assistance, please contact NCM customer support.

8. Specifikationer

Detailed technical specifications for the NCM Milano Plus Electric City Bike.

9. Garanti og support

NCM provides a manufacturer's warranty for the Milano Plus Electric City Bike. Please refer to the warranty card included with your purchase or visit the official NCM webwebsted for detaljerede vilkår og betingelser.

For technical support, spare parts, or warranty claims, please contact NCM customer service. Have your model number (MILANOPLUS) and purchase date ready when contacting support.

Fabrikant: NCM

Forretningssted: Suzhou Leisger Vehicle Co., Ltd. No.239 Jin Gang Road, Zhangjiagang Free Trade Zone, Jiangsu, China(ZIP:215634)