RAINPOINT WiFi-slangetimer Brugermanual

Indledning

Thank you for choosing the RAINPOINT WiFi Hose Timer. This smart water timer system is designed to simplify your garden and drip irrigation, offering automatic and manual watering options, Wi-Fi hub connectivity, and voice control via Alexa. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Nøglefunktioner

• Anytime, Anywhere Watering: Control your watering plans remotely via your smartphone, allowing you to change, stop, or run programs from any location.
• Smart stemmestyring: Integrate with Alexa for hands-free watering commands.
• Dual Zone with Multiple Programs: Each of the two zones supports up to three separate watering plans per day, with customizable start times, durations, and frequencies.
• Real-Time Water Consumption Monitoring: A built-in flow meter tracks water usage, providing historical data in gallons or liters to help optimize water-saving efforts.
• Rain Delay and App Notifications: Manually activate rain delay for 24/48/72 hours, or enable automatic delay synchronization with weather apps. Receive app notifications for watering status.
• Multifunctional Smart Wi-Fi Hub: The included hub connects up to four watering timers and features a smart plug for remote control. It maintains stable signal up to 328ft from the timer.
• Irrigation & Mist Modes: Both modes offer customizable start times, durations (1 min - 11h 59min), and watering frequencies (specific day or everyday).

Pakkens indhold

Sørg for, at alle komponenter er til stede, før du fortsætter installationen:

• RAINPOINT WiFi Hose Timer (1 unit)
• Wi-Fi Hub (1 unit)
• Teflon Tape (for sealing connections)
• Brugervejledning (dette dokument)

Note: The timer requires 2 AA alkaline batteries (not included). Ensure to use new, high-quality batteries for optimal performance.

Opsætningsvejledning

1. Batteriinstallation

Proper battery installation is crucial for the timer's functionality.

1. Find batterirummet på bagsiden af ​​timeren.
2. Åbn batterirummets dæksel.
3. Insert 2 brand new AA alkaline batteries, ensuring correct polarity (+/-).
4. Securely close the battery compartment cover. Ensure your hands are dry during this process.

2. Fysisk installation

Attach the timer to your outdoor faucet.

1. Ensure your faucet is clean and free of debris.
2. Screw the timer onto your outdoor faucet. Hand-tighten only. Use the provided Teflon tape for a watertight seal if necessary.
3. Connect your garden hose or drip irrigation system to the outlets of the timer.

3. App Setup & Wi-Fi Hub Connection

Connect your Wi-Fi Hub and timer to the RainPoint App for smart control.

1. Download and open the RainPoint App (or Tuya App) from your device's app store.
2. Opret en konto eller log ind.
3. Plug in the Wi-Fi Hub to a power outlet.
4. In the app, click the "+" button (or "Add Device") and select "Socket (Wi-Fi)" to add the hub.
5. Enter your 2.4GHz Wi-Fi password. (Note: 5GHz Wi-Fi is not supported).
6. Follow the app's instructions to reset the hub (long press button until light blinks quickly) and connect it.
7. Once the hub is connected, select it in the app and click "Manage added devices".
8. Find and click on "Water valve controller" to add your hose timer.
9. On the hose timer, long press the left button (or both buttons for some models) for 5 seconds until the indicator flashes rapidly to enter distribution mode.
10. Follow the app's guide to complete the pairing process.

4. Indstilling af uret

Set the current time on your timer.

1. Drej drejeknappen til "INDSTIL UR".
2. Press the "+/-" buttons to adjust the current time.
3. Press the "OK" button to switch between hour and minute settings.
4. Drej drejeknappen for at gemme ændringer.

Betjeningsvejledning

This section details how to program and operate your RAINPOINT WiFi Hose Timer.

1. Setting Start Time

Program when your watering cycle should begin.

1. Turn the dial to "START TIME".
2. Press the "+/-" buttons to set the desired start time.
3. Press the "OK" button to switch between hour and minute settings.
4. Drej drejeknappen for at gemme ændringer.

2. Setting Watering Duration (How Long)

Define how long each watering cycle will last.

1. Turn the dial to "HOW LONG".
2. Press the "+/-" buttons to set the watering duration (1 minute to 240 minutes).
3. Drej drejeknappen for at gemme ændringer.

3. Setting Watering Frequency (How Often)

Determine how often your watering cycles will repeat.

1. Turn the dial to "HOW OFTEN".
2. Press the "+/-" buttons to set the watering frequency (e.g., every 1 hour to 12 hours, or every 1 day to 7 days).
3. Drej drejeknappen for at gemme ændringer.

4. Automatic Watering

Once programmed, the timer will operate automatically.

1. Turn the dial to "AUTO" to start the programmed watering schedule.
2. When watering is ON, the LCD screen displays the remaining time of the current watering program.
3. When watering is OFF, the LCD screen flashes between the next watering start time and the current time.

5. Manuel vanding

Initiate watering instantly without affecting your programmed schedule.

1. With the dial at "AUTO" and the timer not in Rain Delay mode, press the "MANUAL" button.
2. Press the "+/-" buttons to select the desired watering duration (1 minute to 240 minutes).
3. Press the "OK" button to start manual watering.
4. Manual watering starts, and the LCD screen displays the remaining time.
5. To cancel manual watering, turn the dial to "OFF" and then back to "AUTO".

6. Forsinkelse ved regn

Pause your watering schedule for a set period due to rain or other reasons.

1. With the dial at "AUTO", long press the "DELAY" button for 3 seconds.
2. Press the "+/-" buttons to select a delay of 24, 48, or 72 hours. Press "OK" to confirm.
3. Rain delay starts, and the LCD screen displays the remaining time before the preset program resumes.
4. To cancel rain delay, long press the "DELAY" button for 3 seconds with the dial at "AUTO".

7. Stemmestyring med Alexa

Control your timer using voice commands through Amazon Alexa.

1. Ensure your Wi-Fi Hub and Timer are successfully connected to the RainPoint App.
2. Åbn Amazon Alexa-appen på din smartphone.
3. Navigate to "Skills & Games" (usually under the "More" tab).
4. Søg efter "Tuya Smart" (or "RainPoint" if available as a direct skill) and enable the skill.
5. Link your Tuya Smart account with your Amazon Alexa account.
6. Once linked, Alexa will discover your devices. You can rename your watering zones (e.g., "Left Water Timer", "Right Water Timer") in the Alexa app for easier voice commands.
7. You can now use voice commands like: "Alexa, open the Left Water Timer." or "Alexa, turn on the Right Water Timer."

8. Water Consumption Monitoring

Track your water usage directly from the app.

• The built-in water flow meter records how much water is used.
• View detailed reports and historical data in gallons or liters within the RainPoint App.
• Use this data to adjust your watering plans and conserve water.

Opretholdelse

1. Rengøring af filteret

Rengør regelmæssigt filteret for at forhindre blokeringer og sikre korrekt vandgennemstrømning.

1. Sluk for vandtilførslen til vandhanen.
2. Skru timeren af ​​vandhanen.
3. Carefully remove the filter screen from the inlet.
4. Rinse the filter screen under running water to remove any debris or sediment.
5. Sæt den rene filterskærm i igen, og sæt timeren på vandhanen igen.

Fejlfinding

1. Vandlækage

If you experience water leakage from the timer connections:

• Tjek filter: A clogged filter can sometimes cause back pressure leading to leaks. Clean the filter as described in the Maintenance section.
• Spænd forbindelser: Ensure all connections (faucet to timer, hose to timer) are hand-tight. Do not overtighten.
• Tjek skiver: Ensure rubber washers are properly seated and not damaged. Replace if necessary.
• Use Teflon Tape: Apply Teflon tape to the threads of the faucet connection for an improved seal.

Specifikationer

Garanti og support

RAINPOINT products are designed for durability and performance. For warranty information, technical support, or any inquiries, please refer to the contact details provided on the product packaging or the official RAINPOINT website. You can also reach out via email or live chat for assistance.